switnet
/
quick-jibri-installer
2
1
Fork 1
Code Issues 2 Pull Requests Packages Projects Releases 13 Wiki Activity

7.0.3 #83

Merged
Ark74 merged 34 commits from unstable into master 2022-06-30 14:57:12 +00:00
Conversation 0 Commits 34 Files Changed 3 +160 -142
1 changed files with 160 additions and 142 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files
Showing only changes of commit 16458ee32a - Show all commits

302
quick_jibri_installer.sh
View File

@ -28,7 +28,7 @@ GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list"
GOOGLE_ACTIVE_REPO=$(apt-cache policy | awk '/chrome/{print$3}' | awk -F "/" 'NR==1{print$2}') GOOGLE_ACTIVE_REPO=$(apt-cache policy | awk '/chrome/{print$3}' | awk -F "/" 'NR==1{print$2}')
PROSODY_REPO="$(apt-cache policy | awk '/prosody/{print$3}' | awk -F "/" 'NR==1{print$2}')" PROSODY_REPO="$(apt-cache policy | awk '/prosody/{print$3}' | awk -F "/" 'NR==1{print$2}')"
PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)" PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
NL="$(echo -e '\n ')" NL="$(printf '\n ')"
exit_ifinstalled() { exit_ifinstalled() {
if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
@ -56,7 +56,7 @@ install_ifnot() {
if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
echo " $1 is installed, skipping..." echo " $1 is installed, skipping..."
else else
echo -e "\n---- Installing $1 ----" printf "\n---- Installing %s ----" "$1"
apt-get -yq2 install "$1" apt-get -yq2 install "$1"
fi fi
} }
@ -68,15 +68,15 @@ The recommended setup is using NGINX, exiting...
exit exit
elif [ "$NGINX" -eq 1 ]; then elif [ "$NGINX" -eq 1 ]; then
echo -e "\nWebserver already installed!\n" printf "\nWebserver already installed!\n"
else else
echo -e "\nInstalling nginx webserver!\n" printf "\nInstalling nginx webserver!\n"
install_ifnot nginx install_ifnot nginx
fi fi
} }
check_snd_driver() { check_snd_driver() {
echo -e "\n# Checking ALSA - Loopback module..." printf "\n# Checking ALSA - Loopback module..."
echo "snd-aloop" | tee -a /etc/modules echo "snd-aloop" | tee -a /etc/modules
modprobe snd-aloop modprobe snd-aloop
if [ "$(lsmod|awk '/snd_aloop/{print$1}'|awk 'NR==1')" = "snd_aloop" ]; then if [ "$(lsmod|awk '/snd_aloop/{print$1}'|awk 'NR==1')" = "snd_aloop" ]; then
@ -124,7 +124,7 @@ while [ $secs -gt 0 ]; do
done done
} }
clear clear
echo -e ' printf '
######################################################################## ########################################################################
Welcome to Jitsi/Jibri Installer Welcome to Jitsi/Jibri Installer
######################################################################## ########################################################################
@ -148,13 +148,13 @@ if ! [ "$(id -u)" = 0 ]; then
echo "You need to be root or have sudo privileges!" echo "You need to be root or have sudo privileges!"
exit 0 exit 0
fi fi
printf "\nOS: %s" "$(lsb_release -sd)"
if [ "$DIST" = "bionic" ] || \ if [ "$DIST" = "bionic" ] || \
[ "$DIST" = "focal" ]; then [ "$DIST" = "focal" ]; then
echo "OS: $(lsb_release -sd)" printf "\nGood, this is a supported platform!"
echo "Good, this is a supported platform!"
else else
echo "OS: $(lsb_release -sd)" printf "\nSorry, this platform is not supported... exiting"
echo "Sorry, this platform is not supported... exiting"
exit exit
fi fi
#Suggest 20.04 LTS release over 18.04 in April 2022 #Suggest 20.04 LTS release over 18.04 in April 2022
@ -174,46 +174,44 @@ fi
#Check system resources #Check system resources
echo "Verifying System Resources:" echo "Verifying System Resources:"
if [ "$(nproc --all)" -lt 4 ];then if [ "$(nproc --all)" -lt 4 ];then
echo " printf "\nWarning!: The system do not meet the minimum CPU requirements for Jibri to run."
Warning!: The system do not meet the minimum CPU requirements for Jibri to run. printf "\n>> We recommend 4 cores/threads for Jibri!\n\n"
>> We recommend 4 cores/threads for Jibri! CPU_MIN="N"
"
CPU_MIN="N"
else else
echo "CPU Cores/Threads: OK ($(nproc --all))" printf "\nCPU Cores/Threads: OK (%s)\n\n" "$(nproc --all)"
CPU_MIN="Y" CPU_MIN="Y"
fi fi
sleep .1
### Test RAM size (8GB min) ### ### Test RAM size (8GB min) ###
mem_available="$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')" mem_available="$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')"
if [ "$mem_available" -lt 7700000 ]; then if [ "$mem_available" -lt 7700000 ]; then
echo " printf "\nWarning!: The system do not meet the minimum RAM requirements for Jibri to run."
Warning!: The system do not meet the minimum RAM requirements for Jibri to run. printf "\n>> We recommend 8GB RAM for Jibri!\n\n"
>> We recommend 8GB RAM for Jibri! MEM_MIN="N"
"
MEM_MIN="N"
else else
echo "Memory: OK ($((mem_available/1024)) MiB)" printf "\nMemory: OK (%s) MiB)\n\n" "$(mem_available/1024)"
MEM_MIN="Y" MEM_MIN="Y"
fi fi
sleep .1
if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then
echo "All requirements seems meet!" echo "All requirements seems meet!"
echo "\n - We hope you have a nice recording/streaming session\n " printf "\n - We hope you have a nice recording/streaming session\n"
else else
echo "CPU ($(nproc --all))/RAM ($((mem_available/1024)) MiB) does NOT meet minimum recommended requirements!" printf "CPU (%s)/RAM (%s MiB) does NOT meet minimum recommended requirements!" "$(nproc --all)" "$((mem_available/1024))"
echo "Even when you can use the videoconferencing sessions, we advice to increase the resources in order to user Jibri." printf "\nEven when you can use the videoconferencing sessions, we advice to increase the resources in order to user Jibri.\n\n"
while [[ "$CONTINUE_LOW_RES" != "yes" && "$CONTINUE_LOW_RES" != "no" ]] while [ "$CONTINUE_LOW_RES" != "yes" ] && [ "$CONTINUE_LOW_RES" != "no" ]
do do
read -p "> Do you want to continue?: (yes or no)$NL" -r CONTINUE_LOW_RES read -p "> Do you want to continue?: (yes or no)$NL" -r CONTINUE_LOW_RES
if [ "$CONTINUE_LOW_RES" = "no" ]; then if [ "$CONTINUE_LOW_RES" = "no" ]; then
echo " - See you next time with more resources!..." echo " - See you next time with more resources!..."
exit exit
elif [ "$CONTINUE_LOW_RES" = "yes" ]; then elif [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo " - We highly recommend to increase the server resources." printf " - We highly recommend to increase the server resources."
echo -e " - Otherwise, please think about adding dedicated jibri nodes instead.\n" printf " - Otherwise, please think about adding dedicated jibri nodes instead.\n"
fi fi
done done
fi fi
sleep .1
if [ "$CONTINUE_LOW_RES" = "yes" ]; then if [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo 'This server will likely have issues due the lack of resources. echo 'This server will likely have issues due the lack of resources.
If you plan to enable other components such as, If you plan to enable other components such as,
@ -228,83 +226,86 @@ If you plan to enable other components such as,
For now we advice to disable the Jibri service locally and add an external For now we advice to disable the Jibri service locally and add an external
Jibri node once this installation has finished, using our script: Jibri node once this installation has finished, using our script:
>> add-jibri-node.sh >> add-jibri-node.sh'
printf "\nSo you can add a Jibri server on a instance with enough resources.\n\n"
So you can add a Jibri server on a instance with enough resources.' sleep .1
while [ "$DISABLE_LOCAL_JIBRI" != "yes" ] && [ "$DISABLE_LOCAL_JIBRI" != "no" ]
while [[ "$DISABLE_LOCAL_JIBRI" != "yes" && "$DISABLE_LOCAL_JIBRI" != "no" ]]
do do
read -p "> Do you want to disable local jibri service?: (yes or no)$NL" -r DISABLE_LOCAL_JIBRI read -p "> Do you want to disable local jibri service?: (yes or no)$NL" -r DISABLE_LOCAL_JIBRI
if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then
echo -e " - Please keep in mind that we might not support underpowered servers.\n" printf " - Please keep in mind that we might not support underpowered servers.\n"
elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
echo -e " - You can add dedicated jibri nodes later, see more at the wiki.\n" printf " - You can add dedicated jibri nodes later, see more at the wiki.\n"
fi fi
done done
fi fi
sleep .1
#Check system oriented porpuse #Check system oriented porpuse
apt-get -yq2 update apt-get -yq2 update
SYSTEM_DE="$(apt-cache search "ubuntu-(desktop|mate-desktop)"|awk '{print$1}'|xargs|sed 's|$| trisquel triskel trisquel-mini|')" SYSTEM_DE="$(apt-cache search "ubuntu-(desktop|mate-desktop)"|awk '{print$1}'|xargs|sed 's|$| trisquel triskel trisquel-mini|')"
SYSTEM_DE_ARRAY=( "$SYSTEM_DE" ) SYSTEM_DE_ARRAY=( "$SYSTEM_DE" )
echo -e "Checking for common desktop system oriented purpose....\n $de" printf "\nChecking for common desktop system oriented purpose....\n"
for de in "${SYSTEM_DE_ARRAY[@]}" for de in "${SYSTEM_DE_ARRAY[@]}"
do do
if [ "$(dpkg-query -W -f='${Status}' "$de" 2>/dev/null | grep -c "ok installed")" == "1" ]; then if [ "$(dpkg-query -W -f='${Status}' "$de" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
echo -e "\n > This instance has $de installed, exiting... printf "\n > This instance has %s installed, exiting...
\nPlease avoid using this installer on a desktop-user oriented GNU/Linux system. \nPlease avoid using this installer on a desktop-user oriented GNU/Linux system.
This is an unsupported use, as it will likely BREAK YOUR SYSTEM, so please don't." This is an unsupported use, as it will likely BREAK YOUR SYSTEM, so please don't." "$de"
exit exit
else else
echo -e " > No standard desktop environment for user oriented porpuse detected, continuing...\n" printf " > No standard desktop environment for user oriented porpuse detected, continuing...\n\n"
fi fi
done done
sleep .1
#Prosody repository #Prosody repository
add_prosody_repo add_prosody_repo
sleep .1
# Jitsi-Meet Repo # Jitsi-Meet Repo
echo -e "\nAdd Jitsi repo" printf "\nAdd Jitsi repo\n"
if [ "$JITSI_REPO" = "stable" ]; then if [ "$JITSI_REPO" = "stable" ]; then
echo "- Jitsi stable repository already installed" printf " - Jitsi stable repository already installed\n\n"
else else
echo 'deb http://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list echo 'deb http://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list
wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add - wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
JITSI_REPO="stable" JITSI_REPO="stable"
fi fi
sleep .1
#Default to LE SSL? #Default to LE SSL?
while [[ "$LE_SSL" != "yes" && "$LE_SSL" != "no" ]] while [ "$LE_SSL" != "yes" ] && [ "$LE_SSL" != "no" ]
do do
read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)$NL" -r LE_SSL read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)$NL" -r LE_SSL
if [ "$LE_SSL" = yes ]; then if [ "$LE_SSL" = yes ]; then
echo -e " - We'll setup Let's Encrypt SSL certs.\n" printf " - We'll setup Let's Encrypt SSL certs.\n\n"
else else
echo " - We'll let you choose later on for it. printf " - We'll let you choose later on for it."
Please be aware that a valid SSL cert is required for some features to work properly." printf" Please be aware that a valid SSL cert is required for some features to work properly.\n\n"
fi fi
done done
sleep .1
#Set domain #Set domain
if [ "$LE_SSL" = "yes" ]; then if [ "$LE_SSL" = "yes" ]
while [[ "$ANS_JD" != "yes" ]] then
while [ "$ANS_JD" != "yes" ]
do do
read -p "> Please set your domain (or subdomain) here: (e.g.: jitsi.domain.com)$NL" -r JITSI_DOMAIN read -p "> Please set your domain (or subdomain) here: (e.g.: jitsi.domain.com)$NL" -r JITSI_DOMAIN
read -p "> Did you mean?: $JITSI_DOMAIN (yes or no)$NL" -r ANS_JD read -p " > Did you mean?: $JITSI_DOMAIN (yes or no)$NL" -r ANS_JD
if [ "$ANS_JD" = "yes" ]; then if [ "$ANS_JD" = "yes" ]
echo " - Alright, let's use $JITSI_DOMAIN." then
echo " - Alright, let's use $JITSI_DOMAIN."
else else
echo " - Please try again." echo " - Please try again."
fi fi
done done
sleep .1
#Sysadmin email #Sysadmin email
while [[ -z $SYSADMIN_EMAIL ]] while [ -z "$SYSADMIN_EMAIL" ]
do do
read -p "> Set sysadmin email (this is a mandatory field):$NL" -r SYSADMIN_EMAIL read -p " > Set sysadmin email (this is a mandatory field):$NL" -r SYSADMIN_EMAIL
done done
sleep .1
#Simple DNS test #Simple DNS test
if [ "$PUBLIC_IP" = "$(dig -4 +short "$JITSI_DOMAIN"||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then if [ "$PUBLIC_IP" = "$(dig -4 +short "$JITSI_DOMAIN"||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
echo -e "\nServer public IP & DNS record for $JITSI_DOMAIN seems to match, continuing..." printf "\nServer public IP & DNS record for %s seems to match, continuing..." "$JITSI_DOMAIN"
else else
echo "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN don't seem to match." echo "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN don't seem to match."
echo " > Please check your dns records are applied and updated, otherwise components may fail." echo " > Please check your dns records are applied and updated, otherwise components may fail."
@ -317,8 +318,9 @@ if [ "$LE_SSL" = "yes" ]; then
fi fi
fi fi
fi fi
sleep .1
# Requirements # Requirements
echo -e "\nWe'll start by installing system requirements this may take a while please be patient...\n" printf "\nWe'll start by installing system requirements this may take a while please be patient...\n"
apt-get update -q2 apt-get update -q2
apt-get dist-upgrade -yq2 apt-get dist-upgrade -yq2
@ -426,11 +428,11 @@ else
rm -rf /tpm/chromedriver_linux64.zip rm -rf /tpm/chromedriver_linux64.zip
fi fi
echo -e "\nCheck Google Software Working...\n" printf "\nCheck Google Software Working...\n"
/usr/bin/google-chrome --version /usr/bin/google-chrome --version
/usr/local/bin/chromedriver --version | awk '{print$1,$2}' /usr/local/bin/chromedriver --version | awk '{print$1,$2}'
echo -e "\nRemove Chrome warning...\n" printf "\nRemove Chrome warning...\n"
mkdir -p /etc/opt/chrome/policies/managed mkdir -p /etc/opt/chrome/policies/managed
echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > "$GCMP_JSON" echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > "$GCMP_JSON"
@ -475,125 +477,134 @@ FQDN_HOST="fqdn"
JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf" JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf"
# Rename hostname for jitsi server # Rename hostname for jitsi server
while [[ "$FQDN_HOST" != "yes" && "$FQDN_HOST" != "no" && -n "$FQDN_HOST" ]] while [ "$FQDN_HOST" != "yes" ] && [ "$FQDN_HOST" != "no" ] && [ -n "$FQDN_HOST" ]
do do
echo -e "> Set $DOMAIN as a fqdn hostname?: (yes or no)" && \ printf "> Set %s as a fqdn hostname?: (yes or no)\n" "$DOMAIN" && \
read -p "Leave empty to default to your current one ($(hostname -f)):$NL" -r FQDN_HOST read -p "Leave empty to default to your current one ($(hostname -f)):$NL" -r FQDN_HOST
if [ "$FQDN_HOST" = "yes" ]; then if [ "$FQDN_HOST" = "yes" ]; then
echo " - $DOMAIN will be used as fqdn hostname, changes will show on reboot." printf " - $DOMAIN will be used as fqdn hostname, changes will show on reboot.\n\n"
hostnamectl set-hostname "${DOMAIN}" hostnamectl set-hostname "${DOMAIN}"
sed -i "1i ${PUBLIC_IP} ${DOMAIN}" /etc/hosts sed -i "1i ${PUBLIC_IP} ${DOMAIN}" /etc/hosts
else else
echo " - $(hostname -f) will be keep." printf " - $(hostname -f) will be keep.\n\n"
fi fi
done done
sleep .1
#Language #Language
echo "## Setting up Jitsi Meet language ## echo "## Setting up Jitsi Meet language ##
You can define the language, for a complete list of the supported languages You can define the language, for a complete list of the supported languages
See here: See here:
https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json"
printf "Jitsi Meet web interface will be set to use such language.\n\n"
Jitsi Meet web interface will be set to use such language." sleep .1
read -p "Please set your language (Press enter to default to 'en'):$NL" -r JB_LANG read -p "Please set your language (Press enter to default to 'en'):$NL" -r JB_LANG
echo -e "\nWe'll take a minute to localize some UI excerpts if you need.\n" sleep .1
printf "\nWe'll take a minute to localize some UI excerpts if you need.\n\n"
sleep .1
#Participant #Participant
echo -e "> Do you want to translate 'Participant' to your own language?" && \ printf "> Do you want to translate 'Participant' to your own language?\n"
sleep .1
read -p "Leave empty to use the default one (English):$NL" -r L10N_PARTICIPANT read -p "Leave empty to use the default one (English):$NL" -r L10N_PARTICIPANT
sleep .1
#Me #Me
echo -e "\n> Do you want to translate 'me' to your own language? printf "\n> Do you want to translate 'me' to your own language?
This must be a really small word to present one self. This must be a really small word to present one self.
Some suggestions might be: yo (Spanish) | je (French) | ich (German)\n" && \ Some suggestions might be: yo (Spanish) | je (French) | ich (German)\n"
sleep .1
read -p "Leave empty to use the default one (English):$NL" -r L10N_ME read -p "Leave empty to use the default one (English):$NL" -r L10N_ME
#Drop unsecure TLS #Drop unsecure TLS
while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]] while [ "$DROP_TLS1" != "yes" ] && [ "$DROP_TLS1" != "no" ]
do do
read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)$NL" -r DROP_TLS1 read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)$NL" -r DROP_TLS1
if [ "$DROP_TLS1" = "no" ]; then if [ "$DROP_TLS1" = "no" ]; then
echo " - TLSv1.0/1.1 will remain." printf " - TLSv1.0/1.1 will remain.\n\n"
elif [ "$DROP_TLS1" = "yes" ]; then elif [ "$DROP_TLS1" = "yes" ]; then
echo " - TLSv1.0/1.1 will be dropped" printf " - TLSv1.0/1.1 will be dropped\n\n"
fi fi
done done
sleep .1
#Brandless Mode #Brandless Mode
while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]] while [ "$ENABLE_BLESSM" != "yes" ] && [ "$ENABLE_BLESSM" != "no" ]
do do
read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)$NL" -r ENABLE_BLESSM read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)$NL" -r ENABLE_BLESSM
if [ "$ENABLE_BLESSM" = "no" ]; then if [ "$ENABLE_BLESSM" = "no" ]; then
echo " - Brandless mode won't be set." printf " - Brandless mode won't be set.\n\n"
elif [ "$ENABLE_BLESSM" = "yes" ]; then elif [ "$ENABLE_BLESSM" = "yes" ]; then
echo " - Brandless mode will be set." printf " - Brandless mode will be set.\n\n"
fi fi
done done
sleep .1
#Welcome Page #Welcome Page
while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]] while [ "$ENABLE_WELCP" != "yes" ] && [ "$ENABLE_WELCP" != "no" ]
do do
read -p "> Do you want to disable the Welcome page: (yes or no)$NL" -r ENABLE_WELCP read -p "> Do you want to disable the Welcome page: (yes or no)$NL" -r ENABLE_WELCP
if [ "$ENABLE_WELCP" = "yes" ]; then if [ "$ENABLE_WELCP" = "yes" ]; then
echo " - Welcome page will be disabled." printf " - Welcome page will be disabled.\n\n"
elif [ "$ENABLE_WELCP" = "no" ]; then elif [ "$ENABLE_WELCP" = "no" ]; then
echo " - Welcome page will be enabled." printf " - Welcome page will be enabled.\n\n"
fi fi
done done
sleep .1
#Close page #Close page
while [[ "$ENABLE_CLOCP" != "yes" && "$ENABLE_CLOCP" != "no" ]] while [ "$ENABLE_CLOCP" != "yes" ] && [ "$ENABLE_CLOCP" != "no" ]
do do
read -p "> Do you want to enable the close page on room exit: (yes or no)$NL" -r ENABLE_CLOCP read -p "> Do you want to enable the close page on room exit: (yes or no)$NL" -r ENABLE_CLOCP
if [ "$ENABLE_CLOCP" = "yes" ]; then if [ "$ENABLE_CLOCP" = "yes" ]; then
echo " - Close page will be enabled." printf " - Close page will be enabled.\n\n"
elif [ "$ENABLE_CLOCP" = "no" ]; then elif [ "$ENABLE_CLOCP" = "no" ]; then
echo " - Close page will be kept disabled." printf " - Close page will be kept disabled.\n\n"
fi fi
done done
sleep .1
# Set authentication method # Set authentication method
echo -e "\n> Jitsi Meet Auth Method selection.\n" printf "\n> Jitsi Meet Auth Method selection.\n"
PS3='Select the authentication method for your Jitsi Meet instance: ' PS3='Select the authentication method for your Jitsi Meet instance: '
options=("Local" "JWT" "None") options=("Local" "JWT" "None")
select opt in "${options[@]}" select opt in "${options[@]}"
do do
case $opt in case $opt in
"Local") "Local")
echo -e "\n > Users are created manually using prosodyctl, only moderators can open a room or launch recording.\n" printf "\n > Users are created manually using prosodyctl, only moderators can open a room or launch recording.\n"
ENABLE_SC="yes" ENABLE_SC="yes"
break break
;; ;;
"JWT") "JWT")
echo -e "\n > A external app manage the token usage/creation, like RocketChat does.\n" printf "\n > A external app manage the token usage/creation, like RocketChat does.\n"
ENABLE_JWT="yes" ENABLE_JWT="yes"
break break
;; ;;
"None") "None")
echo -e "\n > Everyone can access the room as moderators as there is no auth mechanism.\n" printf "\n > Everyone can access the room as moderators as there is no auth mechanism.\n"
break break
;; ;;
*) echo "Invalid option $REPLY, choose 1, 2 or 3";; *) echo "Invalid option $REPLY, choose 1, 2 or 3";;
esac esac
done done
sleep .1
# Set jibris default resolution # Set jibris default resolution
echo -e "\n> What jibri resolution should be the default for this and all the following jibri nodes?\n" printf "\n> What jibri resolution should be the default for this and all the following jibri nodes?\n"
PS3='The more resolution the more resources jibri will require to record properly: ' PS3='The more resolution the more resources jibri will require to record properly: '
jib_res=("HD 720" "FHD 1080") jib_res=("HD 720" "FHD 1080")
select res in "${jib_res[@]}" select res in "${jib_res[@]}"
do do
case $res in case $res in
"HD 720") "HD 720")
echo -e "\n > HD (1280x720) is good enough for most cases, and requires a moderate high hw requirements.\n" printf "\n > HD (1280x720) is good enough for most cases, and requires a moderate high hw requirements.\n\n"
JIBRI_RES="720" JIBRI_RES="720"
break break
;; ;;
"FHD 1080") "FHD 1080")
echo -e "\n > Full HD (1920x1080) is the best resolution available, it also requires high hw requirements.\n" printf "\n > Full HD (1920x1080) is the best resolution available, it also requires high hw requirements.\n\n"
JIBRI_RES="1080" JIBRI_RES="1080"
break break
;; ;;
*) echo "Invalid option «$REPLY», choose 1 or 2";; *) printf "\nInvalid option «$REPLY», choose 1 or 2\n\n"
;;
esac esac
done done
sleep .1
if [ "$JIBRI_RES" = "720" ]; then if [ "$JIBRI_RES" = "720" ]; then
JIBRI_RES_CONF="\"1280x720\"" JIBRI_RES_CONF="\"1280x720\""
JIBRI_RES_XORG_CONF="1280 720" JIBRI_RES_XORG_CONF="1280 720"
@ -605,57 +616,60 @@ if [ "$JIBRI_RES" = "1080" ]; then
fi fi
#Jibri Records Access (JRA) via Nextcloud #Jibri Records Access (JRA) via Nextcloud
while [[ "$ENABLE_NC_ACCESS" != "yes" && "$ENABLE_NC_ACCESS" != "no" ]] while [ "$ENABLE_NC_ACCESS" != "yes" ] && [ "$ENABLE_NC_ACCESS" != "no" ]
do do
read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no) read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS
if [ "$ENABLE_NC_ACCESS" = "no" ]; then if [ "$ENABLE_NC_ACCESS" = "no" ]; then
echo -e " - JRA via Nextcloud won't be enabled.\n" printf " - JRA via Nextcloud won't be enabled.\n\n"
elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
echo -e " - JRA via Nextcloud will be enabled.\n" printf " - JRA via Nextcloud will be enabled.\n\n"
fi fi
done done
sleep .1
#Jigasi #Jigasi
if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then
echo "> Sorry Google SDK doesn't have support yet for $(lsb_release -sd), printf "> Sorry Google SDK doesn't have support yet for %s,
thus, Jigasi Transcript can't be enable. thus, Jigasi Transcript can't be enable.\n\n" "$(lsb_release -sd)"
"
elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then
while [[ "$ENABLE_TRANSCRIPT" != "yes" && "$ENABLE_TRANSCRIPT" != "no" ]] while [ "$ENABLE_TRANSCRIPT" != "yes" ] && [ "$ENABLE_TRANSCRIPT" != "no" ]
do do
read -p "> Do you want to setup Jigasi Transcription: (yes or no) read -p "> Do you want to setup Jigasi Transcription: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
if [ "$ENABLE_TRANSCRIPT" = "no" ]; then if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
echo -e " - Jigasi Transcription won't be enabled.\n" printf " - Jigasi Transcription won't be enabled.\n\n"
elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
echo -e " - Jigasi Transcription will be enabled.\n" printf " - Jigasi Transcription will be enabled.\n\n"
fi fi
done done
else else
echo "No valid option for Jigasi. Please report this to echo "No valid option for Jigasi. Please report this to
https://github.com/switnet-ltd/quick-jibri-installer/issues " https://github.com/switnet-ltd/quick-jibri-installer/issues"
fi fi
sleep .1
#Grafana #Grafana
while [[ "$ENABLE_GRAFANA_DSH" != "yes" && "$ENABLE_GRAFANA_DSH" != "no" ]] while [ "$ENABLE_GRAFANA_DSH" != "yes" ] && [ "$ENABLE_GRAFANA_DSH" != "no" ]
do do
read -p "> Do you want to setup Grafana Dashboard: (yes or no) read -p "> Do you want to setup Grafana Dashboard: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH
if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then
echo -e " - Grafana Dashboard won't be enabled.\n" printf " - Grafana Dashboard won't be enabled.\n\n"
elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
echo -e " - Grafana Dashboard will be enabled.\n" printf " - Grafana Dashboard will be enabled.\n\n"
fi fi
done done
sleep .1
#Docker Etherpad #Docker Etherpad
while [[ "$ENABLE_DOCKERPAD" != "yes" && "$ENABLE_DOCKERPAD" != "no" ]] while [ "$ENABLE_DOCKERPAD" != "yes" ] && [ "$ENABLE_DOCKERPAD" != "no" ]
do do
read -p "> Do you want to setup Docker Etherpad: (yes or no)$NL" -r ENABLE_DOCKERPAD read -p "> Do you want to setup Docker Etherpad: (yes or no)$NL" -r ENABLE_DOCKERPAD
if [ "$ENABLE_DOCKERPAD" = "no" ]; then if [ "$ENABLE_DOCKERPAD" = "no" ]; then
echo -e " - Docker Etherpad won't be enabled.\n" printf " - Docker Etherpad won't be enabled.\n"
elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then
echo -e " - Docker Etherpad will be enabled.\n" printf " - Docker Etherpad will be enabled.\n"
fi fi
done done
sleep .1
#Start configuration #Start configuration
echo ' echo '
######################################################################## ########################################################################
@ -695,17 +709,17 @@ if [ "$LE_SSL" = "yes" ]; then
echo "#Set and upgrade certbot PPA if posssible..." echo "#Set and upgrade certbot PPA if posssible..."
if [ "$CERTBOT_REPO" = "certbot" ]; then if [ "$CERTBOT_REPO" = "certbot" ]; then
echo -e "\nCertbot repository already on the system!\nChecking for updates...\n" printf "\nCertbot repository already on the system!\nChecking for updates...\n"
apt-get -q2 update apt-get -q2 update
apt-get -yq2 dist-upgrade apt-get -yq2 dist-upgrade
elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "200" ]; then elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "200" ]; then
echo -e "\nAdding cerbot (formerly letsencrypt) PPA repository for latest updates\n" printf "\nAdding cerbot (formerly letsencrypt) PPA repository for latest updates\n"
echo "deb http://ppa.launchpad.net/certbot/certbot/ubuntu $DIST main" > /etc/apt/sources.list.d/certbot.list echo "deb http://ppa.launchpad.net/certbot/certbot/ubuntu $DIST main" > /etc/apt/sources.list.d/certbot.list
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 75BCA694 apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 75BCA694
apt-get -q2 update apt-get -q2 update
apt-get -yq2 dist-upgrade apt-get -yq2 dist-upgrade
elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "404" ]; then elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "404" ]; then
echo -e "\nCertbot PPA is not available for $(lsb_release -sc) just yet, it won't be installed...\n" printf "\nCertbot PPA is not available for %s just yet, it won't be installed...\n" "$(lsb_release -sc)"
fi fi
else else
echo "SSL setup will be skipped." echo "SSL setup will be skipped."
@ -737,15 +751,16 @@ sed -i "/shard.HOSTNAME/s|localhost|$DOMAIN|" /etc/jitsi/videobridge/sip-communi
# Configure Jibri # Configure Jibri
if [ "$ENABLE_SC" = "yes" ]; then if [ "$ENABLE_SC" = "yes" ]; then
if [ ! -f "$MOD_LIST_FILE" ]; then if [ ! -f "$MOD_LIST_FILE" ]; then
echo -e "\n-> Adding external module to list prosody users...\n" printf "\n-> Adding external module to list prosody users...\n"
curl -s "$MOD_LISTU" > "$MOD_LIST_FILE" curl -s "$MOD_LISTU" > "$MOD_LIST_FILE"
echo -e "Now you can check registered users with:\nprosodyctl mod_listusers\n" printf "Now you can check registered users with:\nprosodyctl mod_listusers\n"
else else
echo -e "Prosody support for listing users seems to be enabled. \ncheck with: prosodyctl mod_listusers\n" printf "Prosody support for listing users seems to be enabled. \ncheck with: prosodyctl mod_listusers\n"
fi fi
fi fi
sleep .1
#Enable jibri recording #Enable jibri recording
cat << REC-JIBRI >> "$PROSODY_FILE" cat << REC-JIBRI >> "$PROSODY_FILE"
@ -1052,15 +1067,15 @@ if [ "$ENABLE_SA" = "yes" ] && [ -f "$WS_CONF" ]; then
fi fi
#nginx -tlsv1/1.1 #nginx -tlsv1/1.1
if [ "$DROP_TLS1" = "yes" ];then if [ "$DROP_TLS1" = "yes" ];then
echo -e "\nDropping TLSv1/1.1\n" printf "\nDropping TLSv1/1.1\\nn"
sed -i "s|TLSv1 TLSv1.1||" /etc/nginx/nginx.conf sed -i "s|TLSv1 TLSv1.1||" /etc/nginx/nginx.conf
elif [ "$DROP_TLS1" = "no" ];then elif [ "$DROP_TLS1" = "no" ];then
echo -e "\nNo TLSv1/1.1 dropping was done.\n" printf "\nNo TLSv1/1.1 dropping was done.\n\n"
else else
echo "No condition meet, please report to echo "No condition meet, please report to
https://github.com/switnet-ltd/quick-jibri-installer/issues " https://github.com/switnet-ltd/quick-jibri-installer/issues "
fi fi
sleep .1
#================== Setup prosody conf file ================= #================== Setup prosody conf file =================
###Setup secure rooms ###Setup secure rooms
@ -1074,21 +1089,21 @@ if [ "$ENABLE_SC" = "yes" ]; then
read -p "Set username for secure room moderator:$NL" -r SEC_ROOM_USER read -p "Set username for secure room moderator:$NL" -r SEC_ROOM_USER
read -p "Secure room moderator password:$NL" -r SEC_ROOM_PASS read -p "Secure room moderator password:$NL" -r SEC_ROOM_PASS
prosodyctl register "$SEC_ROOM_USER" "$DOMAIN" "$SEC_ROOM_PASS" prosodyctl register "$SEC_ROOM_USER" "$DOMAIN" "$SEC_ROOM_PASS"
sleep .1
echo -e "\nSecure rooms are being enabled..." printf "\nSecure rooms are being enabled...\n"
echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \ echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered. or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered.
If you have issues with the password refer to your sysadmin." If you have issues with the password refer to your sysadmin."
sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" "$JICOFO_SIP" sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" "$JICOFO_SIP"
sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
fi fi
sleep .1
###JWT ###JWT
if [ "$ENABLE_JWT" = "yes" ]; then if [ "$ENABLE_JWT" = "yes" ]; then
echo -e "\nJWT auth is being setup..." printf "\nJWT auth is being setup...\n"
bash "$PWD"/mode/jwt.sh bash "$PWD"/mode/jwt.sh
fi fi
sleep .1
#Guest allow #Guest allow
#Change back lobby - https://community.jitsi.org/t/64769/136 #Change back lobby - https://community.jitsi.org/t/64769/136
if [ "$ENABLE_SC" = "yes" ];then if [ "$ENABLE_SC" = "yes" ];then
@ -1153,17 +1168,15 @@ sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ }," "$MEET_CONF"
sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" "$MEET_CONF" sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" "$MEET_CONF"
#Check config file #Check config file
echo -e "\n# Checking $MEET_CONF file for errors\n" printf "\n# Checking %s file for errors\n" "$MEET_CONF"
CHECKJS=$(esvalidate "$MEET_CONF"| cut -d ":" -f2) CHECKJS=$(esvalidate "$MEET_CONF"| cut -d ":" -f2)
if [[ -z "$CHECKJS" ]]; then if [ -z "$CHECKJS" ]; then
echo -e "\n# The $MEET_CONF configuration seems correct. =)\n" printf "\n# The %s configuration seems correct. =)\n" "$MEET_CONF"
else else
echo " echo -e "\nWatch out!, there seems to be an issue on $MEET_CONF line:
Watch out!, there seems to be an issue on $MEET_CONF line:
$CHECKJS $CHECKJS
Most of the times this is due upstream changes, please report to Most of the times this is due upstream changes, please report to
https://github.com/switnet-ltd/quick-jibri-installer/issues https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
"
fi fi
#Enable jibri services #Enable jibri services
@ -1199,8 +1212,9 @@ if [ "$ENABLE_BLESSM" = "yes" ]; then
sed -i "s|ENABLE_BLESSM=.*|ENABLE_BLESSM=\"on\"|" jitsi-updater.sh sed -i "s|ENABLE_BLESSM=.*|ENABLE_BLESSM=\"on\"|" jitsi-updater.sh
bash "$PWD"/jm-bm.sh bash "$PWD"/jm-bm.sh
fi fi
# Applying best practives for interface config.js # Applying best practives for interface config.js
echo -e "\n> Setting up custom interface_config.js according to best practices." printf "\n> Setting up custom interface_config.js according to best practices."
cp "$INT_CONF" "$INT_CONF_ETC" cp "$INT_CONF" "$INT_CONF_ETC"
#Tune webserver for interface_config.js #Tune webserver for interface_config.js
@ -1217,17 +1231,18 @@ else
fi fi
#JRA via Nextcloud #JRA via Nextcloud
if [ "$ENABLE_NC_ACCESS" = "yes" ]; then if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
echo -e "\nJRA via Nextcloud will be enabled." printf "\nJRA via Nextcloud will be enabled."
if [ "$MODE" = "debug" ]; then if [ "$MODE" = "debug" ]; then
bash "$PWD"/jra_nextcloud.sh -m debug bash "$PWD"/jra_nextcloud.sh -m debug
else else
bash "$PWD"/jra_nextcloud.sh bash "$PWD"/jra_nextcloud.sh
fi fi
fi fi
sleep .1
} > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2) } > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2)
#Jigasi Transcript #Jigasi Transcript
if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
echo -e "\nJigasi Transcription will be enabled." printf "\nJigasi Transcription will be enabled."
# ToDo: Analyze behavior on debug # ToDo: Analyze behavior on debug
#if [ "$MODE" = "debug" ]; then #if [ "$MODE" = "debug" ]; then
# bash "$PWD"/jigasi.sh -m debug # bash "$PWD"/jigasi.sh -m debug
@ -1235,25 +1250,28 @@ if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
bash "$PWD"/jigasi.sh bash "$PWD"/jigasi.sh
#fi #fi
fi fi
sleep .1
{ {
#Grafana Dashboard #Grafana Dashboard
if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
echo -e "\nGrafana Dashboard will be enabled." printf "\nGrafana Dashboard will be enabled."
if [ "$MODE" = "debug" ]; then if [ "$MODE" = "debug" ]; then
bash "$PWD"/grafana.sh -m debug bash "$PWD"/grafana.sh -m debug
else else
bash "$PWD"/grafana.sh bash "$PWD"/grafana.sh
fi fi
fi fi
sleep .1
#Docker Etherpad #Docker Etherpad
if [ "$ENABLE_DOCKERPAD" = "yes" ]; then if [ "$ENABLE_DOCKERPAD" = "yes" ]; then
echo -e "\nDocker Etherpad will be enabled." printf "\nDocker Etherpad will be enabled."
if [ "$MODE" = "debug" ]; then if [ "$MODE" = "debug" ]; then
bash "$PWD"/etherpad-docker.sh -m debug bash "$PWD"/etherpad-docker.sh -m debug
else else
bash "$PWD"/etherpad-docker.sh bash "$PWD"/etherpad-docker.sh
fi fi
fi fi
sleep .1
#Prevent JMS conecction issue #Prevent JMS conecction issue
if [ -z "$(awk "/127.0.0.1/&&/$DOMAIN/{print\$1}" /etc/hosts)" ];then if [ -z "$(awk "/127.0.0.1/&&/$DOMAIN/{print\$1}" /etc/hosts)" ];then
sed -i "/127.0.0.1/a \\ sed -i "/127.0.0.1/a \\