2022-06-17 21:36:15 +00:00
8 changed files with 396 additions and 392 deletions
--- a/add-jibri-node.sh
+++ b/add-jibri-node.sh
@ -8,7 +8,7 @@
 ### 1_LAST EDITION ###

 #Make sure the file name is the required one
-if [ ! "$(basename $0)" = "add-jibri-node.sh" ]; then
+if [ ! "$(basename "$0")" = "add-jibri-node.sh" ]; then
    echo "For most cases naming won't matter, for this one it does."
    echo "Please use the original name for this script: \`add-jibri-node.sh', and run again."
    exit
@ -55,7 +55,7 @@ CHD_VER="$(curl -sL https://chromedriver.storage.googleapis.com/LATEST_RELEASE)"
 GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list"
 GOOGLE_ACTIVE_REPO=$(apt-cache policy | awk '/chrome/{print$3}' | awk -F "/" 'NR==1{print$2}')
 GCMP_JSON="/etc/opt/chrome/policies/managed/managed_policies.json"
-PUBLIC_IP="$(dig -4 @resolver1.opendns.com ANY myip.opendns.com +short)"
+#PUBLIC_IP="$(dig -4 @resolver1.opendns.com ANY myip.opendns.com +short)"
 NJN_RAND_TAIL="$(tr -dc "a-zA-Z0-9" < /dev/urandom | fold -w 4 | head -n1)"
 NJN_USER="jbnode${ADDUP}_${NJN_RAND_TAIL}"
 NJN_USER_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 32 | head -n1)"
@ -68,7 +68,7 @@ JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf"

 # sed limiters for add-jibri-node.sh variables
 var_dlim() {
-    grep -n $1 add-jibri-node.sh|head -n1|cut -d ":" -f1
+    grep -n "$1" add-jibri-node.sh|head -n1|cut -d ":" -f1
 }

 check_var() {
@ -89,19 +89,19 @@ echo "
 # Checking initial necessary variables...
 #-----------------------------------------------------------------------"

-JMS_DATA=($MAIN_SRV_DIST \
-          $MAIN_SRV_REPO \
-          $MAIN_SRV_DOMAIN \
-          $JibriBrewery \
-          $JB_NAME \
-          $JB_AUTH_PASS \
-          $JB_REC_PASS \
-          $MJS_USER \
-          $MJS_USER_PASS \
-          $JIBRI_RES_CONF \
-          $JIBRI_RES_XORG_CONF)
+JMS_DATA=("$MAIN_SRV_DIST" \
+          "$MAIN_SRV_REPO" \
+          "$MAIN_SRV_DOMAIN" \
+          "$JibriBrewery" \
+          "$JB_NAME" \
+          "$JB_AUTH_PASS" \
+          "$JB_REC_PASS" \
+          "$MJS_USER" \
+          "$MJS_USER_PASS" \
+          "$JIBRI_RES_CONF" \
+          "$JIBRI_RES_XORG_CONF")

-JMS_EVAL=${JMS_DATA[0]}
+JMS_EVAL="${JMS_DATA[0]}"
 for i in "${JMS_DATA[@]}"; do
    if [[ "$JMS_EVAL" != "$i" ]]; then
        ALL_TBD="no"
@ -152,7 +152,7 @@ else
 fi
 ### Test RAM size (8GB min) ###
 mem_available=$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')
-if [ ${mem_available} -lt 7700000 ]; then
+if [ "${mem_available}" -lt 7700000 ]; then
  echo "
 Warning!: The system do not meet the minimum RAM requirements for Jibri to run.
 >> We recommend 8GB RAM for Jibri!
@ -190,7 +190,7 @@ sed -i "1i 127.0.0.1 jbnode_${SHORT_ID}.${MAIN_SRV_DOMAIN}" /etc/hosts
 # Jitsi-Meet Repo
 echo "Add Jitsi repo"
 if [ -z "$JITSI_REPO" ]; then
-    echo "deb http://download.jitsi.org $MAIN_SRV_REPO/" > /etc/apt/sources.list.d/jitsi-$MAIN_SRV_REPO.list
+    echo "deb http://download.jitsi.org $MAIN_SRV_REPO/" > /etc/apt/sources.list.d/jitsi-"$MAIN_SRV_REPO".list
    wget -qO -  https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
 elif [ ! "$JITSI_REPO" = "$MAIN_SRV_REPO" ]; then
    echo "Main and node servers repository don't match, extiting.."
@ -235,7 +235,7 @@ else
 # Your audio driver might not be able to load.
 # We'll check the state of this Jibri with our 'test-jibri-env.sh' tool.
 #-----------------------------------------------------------------------"
-curl -s $TEST_JIBRI_ENV > /tmp/test-jibri-env.sh
+curl -s "$TEST_JIBRI_ENV" > /tmp/test-jibri-env.sh
 #Test tool
  if [ "$MODE" = "debug" ]; then
    bash /tmp/test-jibri-env.sh -m debug
@ -248,14 +248,14 @@ fi
 }

 echo "# Check and Install HWE kernel if possible..."
-HWE_VIR_MOD=$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr) 2>/dev/null|head -n1|grep -c "hwe-$(lsb_release -sr)")
+HWE_VIR_MOD="$(apt-cache madison linux-image-generic-hwe-"$(lsb_release -sr)" 2>/dev/null|head -n1|grep -c hwe-"$(lsb_release -sr)")"
 if [ "$HWE_VIR_MOD" = "1" ]; then
    apt-get -y install \
-    linux-image-generic-hwe-$(lsb_release -sr)
+    linux-image-generic-hwe-"$(lsb_release -sr)"
 else
    apt-get -y install \
    linux-image-generic \
-    linux-modules-extra-$(uname -r)
+    linux-modules-extra-"$(uname -r)"
 fi

 echo "
@ -273,7 +273,7 @@ if [ "$GOOGLE_ACTIVE_REPO" = "main" ]; then
 else
    echo "Installing Google Chrome Stable"
    wget -q -O - https://dl.google.com/linux/linux_signing_key.pub | apt-key add -
-    echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee $GOOGL_REPO
+    echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee "$GOOGL_REPO"
 fi
 apt-get -q2 update
 apt-get install -y google-chrome-stable
@ -283,7 +283,7 @@ if [ -f /usr/local/bin/chromedriver ]; then
    echo "Chromedriver already installed."
 else
    echo "Installing Chromedriver"
-    wget -q https://chromedriver.storage.googleapis.com/$CHD_VER/chromedriver_linux64.zip -O /tmp/chromedriver_linux64.zip
+    wget -q https://chromedriver.storage.googleapis.com/"$CHD_VER"/chromedriver_linux64.zip -O /tmp/chromedriver_linux64.zip
    unzip /tmp/chromedriver_linux64.zip -d /usr/local/bin/
    chown root:root /usr/local/bin/chromedriver
    chmod 0755 /usr/local/bin/chromedriver
@ -305,18 +305,18 @@ echo "
 Remove Chrome warning...
 "
 mkdir -p /etc/opt/chrome/policies/managed
-echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > $GCMP_JSON
+echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > "$GCMP_JSON"

 # Recording directory
-if [ ! -d $DIR_RECORD ]; then
-mkdir $DIR_RECORD
+if [ ! -d "$DIR_RECORD" ]; then
+mkdir "$DIR_RECORD"
 fi
-chown -R jibri:jibri $DIR_RECORD
+chown -R jibri:jibri "$DIR_RECORD"

-cat << REC_DIR > $REC_DIR
+cat << REC_DIR > "$REC_DIR"
 #!/bin/bash

-RECORDINGS_DIR=$DIR_RECORD
+RECORDINGS_DIR="$DIR_RECORD"

 echo "This is a dummy finalize script" > /tmp/finalize.out
 echo "The script was invoked with recordings directory $RECORDINGS_DIR." >> /tmp/finalize.out
@ -341,12 +341,12 @@ fi

 exit 0
 REC_DIR
-chown jibri:jibri $REC_DIR
-chmod +x $REC_DIR
+chown jibri:jibri "$REC_DIR"
+chmod +x "$REC_DIR"

 ## New Jibri Config (2020)
-mv $JIBRI_CONF ${JIBRI_CONF}-dpkg-file
-cat << NEW_CONF > $JIBRI_CONF
+mv "$JIBRI_CONF" "${JIBRI_CONF}"-dpkg-file
+cat << NEW_CONF > "$JIBRI_CONF"
 // New XMPP environment config.
 jibri {
    streaming {
@ -459,25 +459,25 @@ jibri {
 NEW_CONF

 #Jibri xorg resolution
-sed -i "s|[[:space:]]Virtual .*|Virtual $JIBRI_RES_XORG_CONF|" $JIBRI_XORG_CONF
+sed -i "s|[[:space:]]Virtual .*|Virtual $JIBRI_RES_XORG_CONF|" "$JIBRI_XORG_CONF"

 echo -e "\n---- Create random nodesync user ----"
-useradd -m -g jibri $NJN_USER
+useradd -m -g jibri "$NJN_USER"
 echo "$NJN_USER:$NJN_USER_PASS" | chpasswd

 echo -e "\n---- We'll connect to main server ----"
 read -n 1 -s -r -p "Press any key to continue..."$'\n'
-sudo su $NJN_USER -c "ssh-keygen -t rsa -f ~/.ssh/id_rsa -b 4096 -o -a 100 -q -N ''"
+sudo su "$NJN_USER" -c "ssh-keygen -t rsa -f ~/.ssh/id_rsa -b 4096 -o -a 100 -q -N ''"

 #Workaround for jibri to do cleaning.
-install -m 0600 -o jibri /home/$NJN_USER/.ssh/id_rsa /home/jibri/jbsync.pem
+install -m 0600 -o jibri /home/"$NJN_USER"/.ssh/id_rsa /home/jibri/jbsync.pem
 sudo su jibri -c "install -D /dev/null /home/jibri/.ssh/known_hosts"
 sudo su jibri -c "ssh-keyscan -t rsa $MAIN_SRV_DOMAIN >> /home/jibri/.ssh/known_hosts"

 echo -e "\n\n##################\nRemote pass: $MJS_USER_PASS\n################## \n\n"
-ssh-keyscan -t rsa $MAIN_SRV_DOMAIN >> ~/.ssh/known_hosts
-ssh $MJS_USER@$MAIN_SRV_DOMAIN sh -c "'cat >> .ssh/authorized_keys'" < /home/$NJN_USER/.ssh/id_rsa.pub
-sudo su $NJN_USER -c "ssh-keyscan -t rsa $MAIN_SRV_DOMAIN >> /home/$NJN_USER/.ssh/known_hosts"
+ssh-keyscan -t rsa "$MAIN_SRV_DOMAIN" >> ~/.ssh/known_hosts
+ssh "$MJS_USER"@"$MAIN_SRV_DOMAIN" sh -c "'cat >> .ssh/authorized_keys'" < /home/"$NJN_USER"/.ssh/id_rsa.pub
+sudo su "$NJN_USER" -c "ssh-keyscan -t rsa $MAIN_SRV_DOMAIN >> /home/$NJN_USER/.ssh/known_hosts"

 echo -e "\n---- Setup Log system ----"
 cat << INOT_RSYNC > /etc/jitsi/jibri/remote-jbsync.sh
@ -486,21 +486,21 @@ cat << INOT_RSYNC > /etc/jitsi/jibri/remote-jbsync.sh
 # Log process
 exec 3>&1 4>&2
 trap 'exec 2>&4 1>&3' 0 1 2 3
-exec 1>/var/log/$NJN_USER/remote_jnsync.log 2>&1
+exec 1>/var/log/"$NJN_USER"/remote_jnsync.log 2>&1

 # Run sync
 while true; do
-  inotifywait  -t 60 -r -e modify,attrib,close_write,move,delete $DIR_RECORD
-  sudo su $NJN_USER -c "rsync -Aax  --info=progress2 --remove-source-files --exclude '.*/' $DIR_RECORD/ $MJS_USER@$MAIN_SRV_DOMAIN:$DIR_RECORD"
-  find $DIR_RECORD -depth -type d -empty -not -path $DIR_RECORD -delete
+  inotifywait  -t 60 -r -e modify,attrib,close_write,move,delete "$DIR_RECORD"
+  sudo su "$NJN_USER" -c "rsync -Aax  --info=progress2 --remove-source-files --exclude '.*/' $DIR_RECORD/ $MJS_USER@$MAIN_SRV_DOMAIN:$DIR_RECORD"
+  find "$DIR_RECORD" -depth -type d -empty -not -path "$DIR_RECORD" -delete
 done
 INOT_RSYNC


-mkdir /var/log/$NJN_USER
+mkdir /var/log/"$NJN_USER"

-cat << LOG_ROT > /etc/logrotate.d/$NJN_USER
-/var/log/$NJN_USER/*.log {
+cat << LOG_ROT > /etc/logrotate.d/"$NJN_USER"
+/var/log/"$NJN_USER"/*.log {
    monthly
    missingok
    rotate 12
@ -561,7 +561,7 @@ echo "
 echo "Make sure to reboot, it's necessary before *any* usage.
 Rebooting in..."
 secs=$((15))
-while [ $secs -gt 0 ]; do
+while [ "$secs" -gt 0 ]; do
   echo -ne "$secs\033[0K\r"
   sleep 1
   : $((secs--))
--- a/add-jvb2-node.sh
+++ b/add-jvb2-node.sh
@ -8,7 +8,7 @@
 ### 1_LAST EDITION ###

 #Make sure the file name is the required one
-if [ ! "$(basename $0)" = "add-jvb2-node.sh" ]; then
+if [ ! "$(basename "$0")" = "add-jvb2-node.sh" ]; then
    echo "For most cases naming won't matter, for this one it does."
    echo "Please use the original name for this script: \`add-jvb2-node.sh', and run again."
    exit
@ -53,10 +53,10 @@ SHARD_DOMAIN=TBD
 SHARD_PASS=TBD
 MUC_JID=TBD

-MJS_USER=TBD
-MJS_USER_PASS=TBD
-START=0
-LAST=TBD
+#MJS_USER=TBD
+#MJS_USER_PASS=TBD
+#START=0
+#LAST=TBD

 THIS_SRV_DIST=$(lsb_release -sc)
 JITSI_REPO=$(apt-cache policy | awk '/jitsi/&&/stable/{print$3}' | awk -F / 'NR==1{print$1}')
@ -71,7 +71,7 @@ SHORT_ID="$(awk '{print substr($0,0,7)}' /etc/machine-id)"

 # sed limiters for add-jvb2-node.sh variables
 var_dlim() {
-    grep -n $1 add-jvb2-node.sh|head -n1|cut -d ":" -f1
+    grep -n "$1" add-jvb2-node.sh|head -n1|cut -d ":" -f1
 }

 check_var() {
@ -105,7 +105,7 @@ else
 fi
 ### Test RAM size (8GB min) ###
 mem_available=$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')
-if [ ${mem_available} -lt 7700000 ]; then
+if [ "${mem_available}" -lt 7700000 ]; then
  echo "
 Warning!: The system do not meet the CPU recomendations for a JVB node for heavy loads.
 >> We recommend 8GB RAM or above for JVB2!
@ -141,7 +141,7 @@ echo "
 #-----------------------------------------------------------------------"

 check_var JVB_HOSTNNAME "$JVB_HOSTNAME"
-if [ -z $JVB_HOST ]; then
+if [ -z "$JVB_HOST" ]; then
  echo "JVB_HOST is empty, but it may be ok for it to be empty, skipping empty test."
 else
  check_var JVB_HOST "$JVB_HOST"
@ -166,7 +166,7 @@ sed -i "1i 127.0.0.1 jvb_${SHORT_ID}.${MAIN_SRV_DOMAIN}" /etc/hosts
 # Jitsi-Meet Repo
 echo "Add Jitsi repo"
 if [ -z "$JITSI_REPO" ]; then
-    echo "deb http://download.jitsi.org $MAIN_SRV_REPO/" > /etc/apt/sources.list.d/jitsi-$MAIN_SRV_REPO.list
+    echo "deb http://download.jitsi.org $MAIN_SRV_REPO/" > /etc/apt/sources.list.d/jitsi-"$MAIN_SRV_REPO".list
    wget -qO -  https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
 elif [ ! "$JITSI_REPO" = "$MAIN_SRV_REPO" ]; then
    echo "Main and node servers repository don't match, extiting.."
@ -193,14 +193,14 @@ apt-get -y install \
                    wget

 echo "# Check and Install HWE kernel if possible..."
-HWE_VIR_MOD=$(apt-cache madison linux-modules-extra-virtual-hwe-$(lsb_release -sr) 2>/dev/null|head -n1|grep -c "extra-virtual-hwe")
+HWE_VIR_MOD="$(apt-cache madison linux-modules-extra-virtual-hwe-"$(lsb_release -sr)" 2>/dev/null|head -n1|grep -c "extra-virtual-hwe")"
 if [ "$HWE_VIR_MOD" == "1" ]; then
    apt-get -y install \
-    linux-image-generic-hwe-$(lsb_release -sr) \
-    linux-modules-extra-virtual-hwe-$(lsb_release -sr)
+    linux-image-generic-hwe-"$(lsb_release -sr)" \
+    linux-modules-extra-virtual-hwe-"$(lsb_release -sr)"
    else
    apt-get -y install \
-    linux-modules-extra-$(uname -r)
+    linux-modules-extra-"$(uname -r)"
 fi

 echo "
--- a/etherpad-docker.sh
+++ b/etherpad-docker.sh
@ -18,7 +18,7 @@ if [ "$MODE" = "debug" ]; then
 set -x
 fi

-if ! [ $(id -u) = 0 ]; then
+if ! [ "$(id -u)" = 0 ]; then
   echo "You need to be root or have sudo privileges!"
   exit 0
 fi
@ -35,14 +35,14 @@ check_apt_policy() {
 apt-cache policy 2>/dev/null| awk "/$1/{print \$3}" | awk -F '/' 'NR==1{print$2}'
 }
 install_ifnot() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
    echo " $1 is installed, skipping..."
    else
        echo -e "\n---- Installing $1 ----"
-        apt-get -yq2 install $1
+        apt-get -yq2 install "$1"
 fi
 }
-DOMAIN="$(ls /etc/prosody/conf.d/ | awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 MEET_CONF="/etc/jitsi/meet/$DOMAIN-config.js"
 WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
 PSGVER="$(apt-cache madison postgresql|awk -F'[ +]' 'NR==1{print $3}')"
@ -65,7 +65,7 @@ read -p "Set your etherpad docker admin password: " -r ETHERPAD_ADMIN_PASS

 # Install required packages
 install_ifnot docker-ce
-install_ifnot postgresql-$PSGVER
+install_ifnot postgresql-"$PSGVER"

 # Create DB
 echo -e "> Creating postgresql database for container...\n"
@ -100,37 +100,36 @@ fi

 # Tune webserver for Jitsi App control

-if [ $(grep -c "etherpad" $WS_CONF) != 0 ]; then
+if [ "$(grep -c etherpad "$WS_CONF")" != 0 ]; then
    echo "> Webserver seems configured, skipping..."
-elif [ -f $WS_CONF ]; then
+elif [ -f "$WS_CONF" ]; then
    echo "> Setting up webserver configuration file..."
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ #Etherpad block" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \^\~\ \/etherpad\/ {" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:9001\/;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header X-Forwarded-For \$remote_addr;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_buffering off;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header       Host \$host;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \\\n" $WS_CONF
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ #Etherpad block" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \^\~\ \/etherpad\/ {" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:9001\/;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header X-Forwarded-For \$remote_addr;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_buffering off;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header       Host \$host;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
 else
    echo "> No etherpad config done to server file, please report to:
    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
 fi

 # Configure config.js
-if [ $(grep -c "etherpad_base" $WS_CONF) != 0 ]; then
+if [ "$(grep -c "etherpad_base" "$WS_CONF")" != 0 ]; then
    echo -e "> $MEET_CONF seems configured, skipping...\n"
 else
    echo -e "> Setting etherpad domain at $MEET_CONF...\n"
-    sed -i "/ openSharedDocumentOnJoin:/a\ \ \ \ etherpad_base: \'https://$DOMAIN/etherpad/p/\'," $MEET_CONF
+    sed -i "/ openSharedDocumentOnJoin:/a\ \ \ \ etherpad_base: \'https://$DOMAIN/etherpad/p/\'," "$MEET_CONF"
 fi

 echo "> Checking nginx configuration..."
-nginx -t 2>/dev/null

-if [ $? = 0 ]; then
+if nginx -t 2>/dev/null ; then
    echo -e "  -- Docker configuration seems fine, enabling it."
-    systemctl reload nginx
+#    systemctl reload nginx
 else
    echo "Please check your configuration, something may be wrong."
    echo "Will not try to enable etherpad nginx configuration, please report to:
--- a/grafana.sh
+++ b/grafana.sh
@ -26,7 +26,7 @@ if [ "$MODE" = "debug" ]; then
 set -x
 fi

-if ! [ $(id -u) = 0 ]; then
+if ! [ "$(id -u)" = 0 ]; then
   echo "You need to be root or have sudo privileges!"
   exit 0
 fi
@ -39,14 +39,14 @@ echo '
                    by Software, IT & Networks Ltd
 '
 run_service() {
-systemctl enable $1
-systemctl restart $1
-systemctl status $1
+systemctl enable "$1"
+systemctl restart "$1"
+systemctl status "$1"
 }
 MAIN_TEL="/etc/telegraf/telegraf.conf"
 TEL_JIT="/etc/telegraf/telegraf.d/jitsi.conf"
 GRAFANA_INI="/etc/grafana/grafana.ini"
-DOMAIN="$(ls /etc/prosody/conf.d/ | awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
 GRAFANA_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 14 | head -n1)"

@ -162,11 +162,11 @@ while [ $secs -gt 0 ]; do
   : $((secs--))
 done

-if [ -f $WS_CONF ]; then
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \~ \^\/(grafana\/|grafana\/login) {" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:3000;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \\\n" $WS_CONF
+if [ -f "$WS_CONF" ]; then
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \~ \^\/(grafana\/|grafana\/login) {" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:3000;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
    systemctl restart nginx
 else
    echo "No app configuration done to server file, please report to:
@ -206,8 +206,8 @@ grafana_cred="admin:$GRAFANA_PASS"
 grafana_datasource="InfluxDB"
 ds=(11969);
 for d in "${ds[@]}"; do
-  echo -n "Processing $d: "
-  j=$(curl -s -k -u "$grafana_cred" $grafana_host/api/gnet/dashboards/$d | jq .json)
+  echo "Processing $d: "
+  j="$(curl -s -k -u "$grafana_cred" "$grafana_host"/api/gnet/dashboards/"$d" | jq .json)"
  curl -s -k -u "$grafana_cred" -XPOST -H "Accept: application/json" \
    -H "Content-Type: application/json" \
    -d "{
--- a/jitsi-updater.sh
+++ b/jitsi-updater.sh
@ -9,8 +9,11 @@ Purple='\e[0;35m'
 Green='\e[0;32m'
 Yellow='\e[0;33m'
 Color_Off='\e[0m'
+printwc() {
+    printf "%b$2%b" "$1" "${Color_Off}"
+}
 #Check if user is root
-if ! [ $(id -u) = 0 ]; then
+if ! [ "$(id -u)" = 0 ]; then
   echo "You need to be root or have sudo privileges!"
   exit 0
 fi
@ -23,28 +26,28 @@ support="https://switnet.net/support"
 apt_repo="/etc/apt/sources.list.d"
 ENABLE_BLESSM="TBD"
 CHD_LTST="$(curl -sL https://chromedriver.storage.googleapis.com/LATEST_RELEASE)"
-CHD_LTST_2D="$(echo $CHD_LTST|cut -d "." -f 1,2)"
+CHD_LTST_2D="$(echo "$CHD_LTST"|cut -d "." -f 1,2)"
 CHDB="$(whereis chromedriver | awk '{print$2}')"
-DOMAIN="$(ls /etc/prosody/conf.d|awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 NC_DOMAIN="TBD"
 JITSI_MEET_PROXY="/etc/nginx/modules-enabled/60-jitsi-meet.conf"
-if [ -f $JITSI_MEET_PROXY ];then
-PREAD_PROXY=$(grep -nr "preread_server_name" $JITSI_MEET_PROXY | cut -d ":" -f1)
+if [ -f "$JITSI_MEET_PROXY" ];then
+PREAD_PROXY=$(grep -nr "preread_server_name" "$JITSI_MEET_PROXY" | cut -d ":" -f1)
 fi
 INT_CONF="/usr/share/jitsi-meet/interface_config.js"
 INT_CONF_ETC="/etc/jitsi/meet/$DOMAIN-interface_config.js"
 jibri_packages="$(grep Package /var/lib/apt/lists/download.jitsi.org_*_Packages |sort -u|awk '{print $2}'|sed 's|jigasi||')"
 AVATAR="$(grep -r avatar /etc/nginx/sites-*/ 2>/dev/null)"
-if [ -f $apt_repo/google-chrome.list ]; then
+if [ -f "$apt_repo"/google-chrome.list ]; then
    google_package=$(grep Package /var/lib/apt/lists/dl.google.com_linux_chrome_deb_dists_stable_main_binary-amd64_Packages | sort -u | cut -d ' ' -f2)
 else
    echo "Seems no Google repo installed"
 fi
-if [ -z $CHDB ]; then
+if [ -z "$CHDB" ]; then
    echo "Seems no chromedriver installed"
 else
    CHD_VER_LOCAL="$($CHDB -v | awk '{print $2}')"
-    CHD_VER_2D="$(echo $CHD_VER_LOCAL|awk '{printf "%.1f\n", $NF}')"
+    CHD_VER_2D="$(echo "$CHD_VER_LOCAL"|awk '{printf "%.1f\n", $NF}')"
 fi

 # True if $1 is greater than $2
@ -72,21 +75,21 @@ restart_services() {
 update_jitsi_repo() {
    apt-get update -o Dir::Etc::sourcelist="sources.list.d/jitsi-$1.list" \
        -o Dir::Etc::sourceparts="-" -o APT::Get::List-Cleanup="0"
-    apt-get install -qq --only-upgrade $jibri_packages
+    apt-get install -qq --only-upgrade "$jibri_packages"
 }

 update_google_repo() {
-    if [ -f $apt_repo/google-chrome.list ]; then
+    if [ -f "$apt_repo"/google-chrome.list ]; then
    apt-get update -o Dir::Etc::sourcelist="sources.list.d/google-chrome.list" \
        -o Dir::Etc::sourceparts="-" -o APT::Get::List-Cleanup="0"
-    apt-get install -qq --only-upgrade $google_package
+    apt-get install -qq --only-upgrade "$google_package"
    else
        echo "No Google repository found"
    fi
 }
 GOOGL_VER_2D="$(/usr/bin/google-chrome --version|awk '{printf "%.1f\n", $NF}')"
 upgrade_cd() {
-if [ ! -z "$GOOGL_VER_2D" ]; then
+if [ -n "$GOOGL_VER_2D" ]; then
    if version_gt "$GOOGL_VER_2D" "$CHD_VER_2D" ; then
        echo "Upgrading Chromedriver to Google Chromes version"
        wget -q https://chromedriver.storage.googleapis.com/"$CHD_LTST"/chromedriver_linux64.zip \
@ -95,33 +98,38 @@ if [ ! -z "$GOOGL_VER_2D" ]; then
        chown root:root "$CHDB"
        chmod 0755 "$CHDB"
        rm -rf /tpm/chromedriver_linux64.zip
-        printf "Current version: ${Green} "$($CHDB -v |awk '{print $2}'|awk '{printf "%.1f\n", $NF}')" ${Color_Off} (latest available)\n"
+        printf "Current version: "
+        printwc "$Green" "$($CHDB -v |awk '{print $2}'|awk '{printf "%.1f\n", $NF}')"
+        echo -e " (latest available)\n"
    elif [ "$GOOGL_VER_2D" = "$CHD_LTST_2D" ]; then
        echo "No need to upgrade Chromedriver"
-        printf "Current version: ${Green} $CHD_VER_2D ${Color_Off}\n"
+        printf "Current version: "
+        printwc "$Green" "$CHD_VER_2D\n"
    fi
 else
-  printf "${Yellow} -> No Google Chrome versión to match, leaving untouched.${Color_Off}\n"
+  printwc "${Yellow}" " -> No Google Chrome versión to match, leaving untouched.\n"
 fi
 }

 check_lst_cd() {
-printf "${Purple}Checking for the latest Chromedriver${Color_Off}\n"
-if [ -f $CHDB ]; then
-    printf "Current installed Chromedriver: ${Yellow} $CHD_VER_2D ${Color_Off}\n"
-    printf "Current installed Google Chrome: ${Green} $GOOGL_VER_2D ${Color_Off}\n"
+printwc "${Purple}" "Checking for the latest Chromedriver\n"
+if [ -f "$CHDB" ]; then
+    printf "Current installed Chromedriver: "
+    printwc "${Yellow}" "$CHD_VER_2D\n"
+    printf "Current installed Google Chrome: "
+    printwc "${Green}" "$GOOGL_VER_2D\n"
    upgrade_cd
 else
-    printf "${Yellow} -> Seems there is no Chromedriver installed${Color_Off}\n"
+    printwc "${Yellow}" " -> Seems there is no Chromedriver installed\n"
 fi
 }

-printf "${Blue}Update & upgrade Jitsi and components${Color_Off}\n"
-if [ -f $apt_repo/jitsi-unstable.list ]; then
+printwc "${Blue}" "Update & upgrade Jitsi and components\n"
+if [ -f "$apt_repo"/jitsi-unstable.list ]; then
    update_jitsi_repo unstable
    update_google_repo
    check_lst_cd
-elif [ -f $apt_repo/jitsi-stable.list ]; then
+elif [ -f "$apt_repo"/jitsi-stable.list ]; then
    update_jitsi_repo stable
    update_google_repo
    check_lst_cd
@ -144,35 +152,33 @@ if [ -f "$INT_CONF_ETC" ]; then
    echo "Static interface_config.js exists, skipping modification..."
 else
    echo "This setup doesn't have a static interface_config.js, checking changes..."
-    printf "${Purple}========== Setting Static Avatar  ==========${Color_Off}\n"
+    printwc "${Purple}" "========== Setting Static Avatar  ==========\n"
    if [[ -z "$AVATAR" ]]; then
        echo "Moving on..."
    else
        echo "Setting Static Avatar"
-        sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'http://$DOMAIN/avatar/\'|" $INT_CONF
-        sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" $INT_CONF
+        sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'http://$DOMAIN/avatar/\'|" "$INT_CONF"
+        sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" "$INT_CONF"
    fi
-    printf "${Purple}========== Setting Support Link  ==========${Color_Off}\n"
-    if [[ -z $support ]]; then
+    printwc "${Purple}" "========== Setting Support Link  ==========\n"
+    if [[ -z "$support" ]]; then
        echo "Moving on..."
    else
        echo "Setting Support custom link"
-        sed -i "s|https://jitsi.org/live|$support|g" $INT_CONF
+        sed -i "s|https://jitsi.org/live|$support|g" "$INT_CONF"
    fi
-    printf "${Purple}========== Disable Blur my background  ==========${Color_Off}\n"
-    sed -i "s|'videobackgroundblur', ||" $INT_CONF
+    printwc "${Purple}" "========== Disable Blur my background  ==========\n"
+    sed -i "s|'videobackgroundblur', ||" "$INT_CONF"
 fi

 if [  "$NC_DOMAIN" != "TBD" ]; then
-printf "${Purple}========== Enable $NC_DOMAIN for sync client ==========${Color_Off}\n"
+printwc "${Purple}" "========== Enable $NC_DOMAIN for sync client ==========\n"
    if [ -z "$PREAD_PROXY" ]; then
-        echo "
-  Setting up Nextcloud domain on Jitsi Meet turn proxy
-"
-        sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" $JITSI_MEET_PROXY
-        sed -i "/server {/i \ \ \ \ \ \ $DOMAIN    web;" $JITSI_MEET_PROXY
-        sed -i "/server {/i \ \ \ \ \ \ $NC_DOMAIN    web;" $JITSI_MEET_PROXY
-        sed -i "/server {/i \ \ }" $JITSI_MEET_PROXY
+        printf "\n  Setting up Nextcloud domain on Jitsi Meet turn proxy\n\n"
+        sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" "$JITSI_MEET_PROXY"
+        sed -i "/server {/i \ \ \ \ \ \ $DOMAIN    web;" "$JITSI_MEET_PROXY"
+        sed -i "/server {/i \ \ \ \ \ \ $NC_DOMAIN    web;" "$JITSI_MEET_PROXY"
+        sed -i "/server {/i \ \ }" "$JITSI_MEET_PROXY"
      else
        echo "$NC_DOMAIN seems to be on place, skipping..."
    fi
@ -183,6 +189,6 @@ restart_services
 #                         Brandless mode                               #
 ########################################################################
 if [ "$ENABLE_BLESSM" = "on" ]; then
-    bash $PWD/jm-bm.sh
+    bash "$PWD"/jm-bm.sh
 fi
-printf "${Blue}Script completed \o/! ${Color_Off}\n"
+printwc "${Blue}" "Script completed \o/!\n"
--- a/jm-bm.sh
+++ b/jm-bm.sh
@ -4,7 +4,7 @@
 # SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.

-DOMAIN="$(ls /etc/prosody/conf.d/ | awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 CSS_FILE="/usr/share/jitsi-meet/css/all.css"
 TITLE_FILE="/usr/share/jitsi-meet/title.html"
 INT_CONF="/usr/share/jitsi-meet/interface_config.js"
@ -21,7 +21,7 @@ MOVILE_APP_NAME="Jitsi Meet"
 PART_USER="Participant"
 LOCAL_USER="me"
 #
-SEC_ROOM="TBD"
+#SEC_ROOM="TBD"
 echo '
 #--------------------------------------------------
 # Applying Brandless mode
@ -43,7 +43,7 @@ fi
 if [ ! -f "$REC_ICON_PATH" ];then
    cp images/gnome_record.png "$REC_ICON_PATH"
 else
-        echo "recording icon exists, skipping copying..."
+    echo "recording icon exists, skipping copying..."
 fi

 #Custom / Remove icons
@ -53,8 +53,8 @@ sed -i "s|jitsilogo.png|watermark2.png|g" "$TITLE_FILE"
 sed -i "s|logo-deep-linking.png|watermark2.png|g" "$BUNDLE_JS"
 sed -i "s|jitsiLogo_square.png|gnome_record.png|g" "$BUNDLE_JS"
 #Disable logo and url
-if [ -z "$(grep -nr ".leftwatermark{display:none" "$CSS_FILE")" ]; then
-sed -i "s|.leftwatermark{|.leftwatermark{display:none;|" "$CSS_FILE"
+if ! grep -nr ".leftwatermark{display:none" "$CSS_FILE" ; then
+    sed -i "s|.leftwatermark{|.leftwatermark{display:none;|" "$CSS_FILE"
 fi

 #Customize room title
--- a/jra_nextcloud.sh
+++ b/jra_nextcloud.sh
@ -16,12 +16,12 @@ if [ "$MODE" = "debug" ]; then
 set -x
 fi

-if ! [ $(id -u) = 0 ]; then
+if ! [ "$(id -u)" = 0 ]; then
   echo "You need to be root or have sudo privileges!"
   exit 0
 fi
 exit_if_not_installed() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" != "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" != "1" ]; then
    echo " This instance doesn't have $1 installed, exiting..."
    echo " If you think this is an error, please report to:
    -> https://github.com/switnet-ltd/quick-jibri-installer/issues "
@ -38,14 +38,14 @@ echo -e '\n
 exit_if_not_installed jitsi-meet

 DISTRO_RELEASE="$(lsb_release -sc)"
-DOMAIN="$(ls /etc/prosody/conf.d/ | awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 PHP_REPO="$(apt-cache policy | awk '/http/&&/php/{print$2}' | awk -F "/" 'NR==1{print$5}')"
 PHPVER="7.4"
 PSGVER="$(apt-cache madison postgresql|awk -F'[ +]' 'NR==1{print $3}')"
 PHP_FPM_DIR="/etc/php/$PHPVER/fpm"
 PHP_INI="$PHP_FPM_DIR/php.ini"
 PHP_CONF="/etc/php/$PHPVER/fpm/pool.d/www.conf"
-NC_NGINX_SSL_PORT="$(grep "listen 44" /etc/nginx/sites-available/$DOMAIN.conf | awk '{print$2}')"
+NC_NGINX_SSL_PORT="$(grep "listen 44" /etc/nginx/sites-available/"$DOMAIN".conf | awk '{print$2}')"
 NC_REPO="https://download.nextcloud.com/server/releases"
 NCVERSION="$(curl -s -m 900 $NC_REPO/ | sed --silent 's/.*href="nextcloud-\([^"]\+\).zip.asc".*/\1/p' | sort --version-sort | tail -1)"
 STABLEVERSION="nextcloud-$NCVERSION"
@ -62,10 +62,11 @@ PREAD_PROXY=$(grep -nr "preread_server_name" $JITSI_MEET_PROXY | cut -d ":" -f1)
 fi
 PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
 ISO3166_CODE=TBD
+NL="$(echo -e '\n> ')"

 while [[ "$ANS_NCD" != "yes" ]]
 do
-  read -p "> Please set your domain (or subdomain) here for Nextcloud: (e.g.: cloud.domain.com)"$'\n' -r NC_DOMAIN
+  read -p "> Please set your domain (or subdomain) here for Nextcloud: (e.g.: cloud.domain.com)$NL" -r NC_DOMAIN
  if [ -z "$NC_DOMAIN" ];then
    echo "-- This field is mandatory."
  elif [ "$NC_DOMAIN" = "$DOMAIN" ]; then
@ -79,13 +80,12 @@ do
  fi
 done
  #Simple DNS test
-if [ "$PUBLIC_IP" = "$(dig -4 +short $NC_DOMAIN|awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
-  echo "Server public IP  & DNS record for $NC_DOMAIN seems to match, continuing...
-"
+if [ "$PUBLIC_IP" = "$(dig -4 +short "$NC_DOMAIN"|awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
+  echo -e "Server public IP  & DNS record for $NC_DOMAIN seems to match, continuing...\n\n"
 else
  echo "Server public IP ($PUBLIC_IP) & DNS record for $NC_DOMAIN don't seem to match."
  echo "  > Please check your dns records are applied and updated, otherwise Nextcloud may fail."
-  read -p "  > Do you want to continue?: (yes or no)"$'\n' -r DNS_CONTINUE
+  read -p "  > Do you want to continue?: (yes or no)$NL" -r DNS_CONTINUE
  if [ "$DNS_CONTINUE" = "yes" ]; then
    echo "  - We'll continue anyway..."
  else
@ -114,7 +114,7 @@ while [[ "$ENABLE_HSTS" != "yes" && "$ENABLE_HSTS" != "no" ]]
 do
    read -p "> Do you want to enable HSTS for this domain?: (yes or no)
  Be aware this option apply mid-term effects on the domain, choose \"no\"
-  in case you don't know what you are doing. More at https://hstspreload.org/"$'\n' -r ENABLE_HSTS
+  in case you don't know what you are doing. More at https://hstspreload.org/$NL" -r ENABLE_HSTS
    if [ "$ENABLE_HSTS" = "no" ]; then
        echo "-- HSTS won't be enabled."
    elif [ "$ENABLE_HSTS" = "yes" ]; then
@ -129,7 +129,7 @@ while [ ${#ISO3166_CODE} -gt 2 ];
 do
 echo -e "Some examples might be: Germany > DE | Mexico > MX | Spain > ES | USA > US\n
 Do you want to set such code for your installation?" && \
-read -p "Leave empty if you don't want to set any: "$'\n' ISO3166_CODE
+read -p "Leave empty if you don't want to set any: " -r ISO3166_CODE
  if [ ${#ISO3166_CODE} -gt 2 ]; then
    echo -e "\n-- This code is only 2 characters long, please check your input.\n"
  fi
@ -137,7 +137,7 @@ done

 echo -e "\n# Check for jitsi-meet/jibri\n"
 if [ "$(dpkg-query -W -f='${Status}' jibri 2>/dev/null | grep -c "ok installed")" == "1" ] || \
-   [ -f /etc/prosody/conf.d/$DOMAIN.conf ]; then
+   [ -f /etc/prosody/conf.d/"$DOMAIN".conf ]; then
    echo "jitsi meet/jibri is installed, checking version:"
    apt-show-versions jibri
 else
@ -146,7 +146,7 @@ else
 fi

 exit_ifinstalled() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
    echo " This instance already has $1 installed, exiting..."
    echo " If you think this is an error, please report to:
    -> https://github.com/switnet-ltd/quick-jibri-installer/issues "
@ -154,11 +154,11 @@ if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" =
 fi
 }
 install_ifnot() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
    echo " $1 is installed, skipping..."
 else
    echo -e "\n---- Installing $1 ----"
-    apt-get -yq2 install $1
+    apt-get -yq2 install "$1"
 fi
 }
 add_php74() {
@ -174,46 +174,46 @@ else
 fi
 }
 #Prevent root folder permission issues
-cp $PWD/files/jra-nc-app-ef.json /tmp
+cp "$PWD"/files/jra-nc-app-ef.json /tmp

-exit_ifinstalled postgresql-$PSGVER
+exit_ifinstalled postgresql-"$PSGVER"

 ## Install software requirements
 # PostgresSQL
-install_ifnot postgresql-$PSGVER
+install_ifnot postgresql-"$PSGVER"

 # PHP 7.4
 add_php74
 apt-get install -y \
            imagemagick \
-            php$PHPVER-fpm \
-            php$PHPVER-bcmath \
-            php$PHPVER-bz2 \
-            php$PHPVER-curl \
-            php$PHPVER-gd \
-            php$PHPVER-gmp \
-            php$PHPVER-imagick \
-            php$PHPVER-intl \
-            php$PHPVER-json \
-            php$PHPVER-ldap \
-            php$PHPVER-mbstring \
-            php$PHPVER-pgsql \
-            php$PHPVER-redis \
-            php$PHPVER-soap \
-            php$PHPVER-xml \
-            php$PHPVER-xmlrpc \
-            php$PHPVER-zip \
+            php"$PHPVER"-fpm \
+            php"$PHPVER"-bcmath \
+            php"$PHPVER"-bz2 \
+            php"$PHPVER"-curl \
+            php"$PHPVER"-gd \
+            php"$PHPVER"-gmp \
+            php"$PHPVER"-imagick \
+            php"$PHPVER"-intl \
+            php"$PHPVER"-json \
+            php"$PHPVER"-ldap \
+            php"$PHPVER"-mbstring \
+            php"$PHPVER"-pgsql \
+            php"$PHPVER"-redis \
+            php"$PHPVER"-soap \
+            php"$PHPVER"-xml \
+            php"$PHPVER"-xmlrpc \
+            php"$PHPVER"-zip \
            redis-server \
            unzip

 #System related
 install_ifnot smbclient
-sed -i "s|.*env\[HOSTNAME\].*|env\[HOSTNAME\] = \$HOSTNAME|" $PHP_CONF
-sed -i "s|.*env\[PATH\].*|env\[PATH\] = /usr/local/bin:/usr/bin:/bin|" $PHP_CONF
-sed -i "s|.*env\[TMP\].*|env\[TMP\] = /tmp|" $PHP_CONF
-sed -i "s|.*env\[TMPDIR\].*|env\[TMPDIR\] = /tmp|" $PHP_CONF
-sed -i "s|.*env\[TEMP\].*|env\[TEMP\] = /tmp|" $PHP_CONF
-sed -i "s|;clear_env = no|clear_env = no|" $PHP_CONF
+sed -i "s|.*env\[HOSTNAME\].*|env\[HOSTNAME\] = \$HOSTNAME|" "$PHP_CONF"
+sed -i "s|.*env\[PATH\].*|env\[PATH\] = /usr/local/bin:/usr/bin:/bin|" "$PHP_CONF"
+sed -i "s|.*env\[TMP\].*|env\[TMP\] = /tmp|" "$PHP_CONF"
+sed -i "s|.*env\[TMPDIR\].*|env\[TMPDIR\] = /tmp|" "$PHP_CONF"
+sed -i "s|.*env\[TEMP\].*|env\[TEMP\] = /tmp|" "$PHP_CONF"
+sed -i "s|;clear_env = no|clear_env = no|" "$PHP_CONF"

 echo "
 Tunning PHP.ini...
@ -244,14 +244,14 @@ echo "opcache.revalidate_freq=1"
 echo "opcache.validate_timestamps=1"
 } >> "$PHP_INI"

-systemctl restart php$PHPVER-fpm.service
+systemctl restart php"$PHPVER"-fpm.service

 #--------------------------------------------------
 # Create DB user
 #--------------------------------------------------

 echo -e "\n---- Creating the PgSQL DB & User  ----"
-cd /tmp
+cd /tmp || exit
 sudo -u postgres psql <<DB
 CREATE DATABASE nextcloud_db;
 CREATE USER ${NC_DB_USER} WITH ENCRYPTED PASSWORD '${NC_DB_PASSWD}';
@ -261,7 +261,7 @@ echo "Done!
 "

 #nginx - configuration
-cat << NC_NGINX > $NC_NGINX_CONF
+cat << NC_NGINX > "$NC_NGINX_CONF"
 #nextcloud config
 upstream php-handler {
    #server 127.0.0.1:9000;
@ -417,9 +417,9 @@ server {
 }
 NC_NGINX
 systemctl stop nginx
-letsencrypt certonly --standalone --renew-by-default --agree-tos -d $NC_DOMAIN
-if [ -f /etc/letsencrypt/live/$NC_DOMAIN/fullchain.pem ];then
-    ln -s $NC_NGINX_CONF /etc/nginx/sites-available/
+letsencrypt certonly --standalone --renew-by-default --agree-tos -d "$NC_DOMAIN"
+if [ -f /etc/letsencrypt/live/"$NC_DOMAIN"/fullchain.pem ];then
+    ln -s "$NC_NGINX_CONF" /etc/nginx/sites-available/
 else
    echo "There are issues on getting the SSL certs..."
    read -n 1 -s -r -p "Press any key to continue"
@ -428,34 +428,34 @@ nginx -t
 systemctl restart nginx

 if [ "$ENABLE_HSTS" = "yes" ]; then
-    sed -i "s|#add_header Strict-Transport-Security|add_header Strict-Transport-Security|g" $NC_NGINX_CONF
+    sed -i "s|#add_header Strict-Transport-Security|add_header Strict-Transport-Security|g" "$NC_NGINX_CONF"
 fi

-if [ ! -z "$PREAD_PROXY" ]; then
+if [ -n "$PREAD_PROXY" ]; then
    echo "
  Setting up Nextcloud domain on Jitsi Meet turn proxy
 "
-    sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" $JITSI_MEET_PROXY
-    sed -i "/server {/i \ \ \ \ \ \ $DOMAIN      web;" $JITSI_MEET_PROXY
-    sed -i "/server {/i \ \ \ \ \ \ $NC_DOMAIN web;" $JITSI_MEET_PROXY
-    sed -i "/server {/i \ \ }" $JITSI_MEET_PROXY
+    sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" "$JITSI_MEET_PROXY"
+    sed -i "/server {/i \ \ \ \ \ \ $DOMAIN      web;" "$JITSI_MEET_PROXY"
+    sed -i "/server {/i \ \ \ \ \ \ $NC_DOMAIN web;" "$JITSI_MEET_PROXY"
+    sed -i "/server {/i \ \ }" "$JITSI_MEET_PROXY"
 fi

 echo "
  Latest version to be installed: $STABLEVERSION
  (This might take sometime, please be patient...)
 "
-curl -s $NC_REPO/$STABLEVERSION.zip > /tmp/$STABLEVERSION.zip
-unzip -q /tmp/$STABLEVERSION.zip
-mv nextcloud $NC_PATH
+curl -s "$NC_REPO"/"$STABLEVERSION".zip > /tmp/"$STABLEVERSION".zip
+unzip -q /tmp/"$STABLEVERSION".zip
+mv nextcloud "$NC_PATH"

-chown -R www-data:www-data $NC_PATH
-chmod -R 755 $NC_PATH
+chown -R www-data:www-data "$NC_PATH"
+chmod -R 755 "$NC_PATH"

 echo "
 Database installation...
 "
-sudo -u www-data php $NC_PATH/occ maintenance:install \
+sudo -u www-data php "$NC_PATH"/occ maintenance:install \
 --database=pgsql \
 --database-name="$NC_DB" \
 --database-user="$NC_DB_USER" \
@ -466,10 +466,10 @@ sudo -u www-data php $NC_PATH/occ maintenance:install \
 echo "
 Apply custom mods...
 "
-sed -i "/datadirectory/a \ \ \'skeletondirectory\' => \'\'," $NC_CONFIG
-sed -i "/skeletondirectory/a \ \ \'simpleSignUpLink.shown\' => false," $NC_CONFIG
-sed -i "/simpleSignUpLink.shown/a \ \ \'knowledgebaseenabled\' => false," $NC_CONFIG
-sed -i "s|http://localhost|http://$NC_DOMAIN|" $NC_CONFIG
+sed -i "/datadirectory/a \ \ \'skeletondirectory\' => \'\'," "$NC_CONFIG"
+sed -i "/skeletondirectory/a \ \ \'simpleSignUpLink.shown\' => false," "$NC_CONFIG"
+sed -i "/simpleSignUpLink.shown/a \ \ \'knowledgebaseenabled\' => false," "$NC_CONFIG"
+sed -i "s|http://localhost|http://$NC_DOMAIN|" "$NC_CONFIG"

 echo "Add crontab..."
 crontab -u www-data -l | { cat; echo "*/5  *  *  *  * php -f $NC_PATH/cron.php"; } | crontab -u www-data -
@ -477,54 +477,54 @@ crontab -u www-data -l | { cat; echo "*/5  *  *  *  * php -f $NC_PATH/cron.php";
 echo "
 Add memcache support...
 "
-sed -i "s|# unixsocket .*|unixsocket /var/run/redis/redis.sock|g" $REDIS_CONF
-sed -i "s|# unixsocketperm .*|unixsocketperm 777|g" $REDIS_CONF
-sed -i "s|port 6379|port 0|" $REDIS_CONF
+sed -i "s|# unixsocket .*|unixsocket /var/run/redis/redis.sock|g" "$REDIS_CONF"
+sed -i "s|# unixsocketperm .*|unixsocketperm 777|g" "$REDIS_CONF"
+sed -i "s|port 6379|port 0|" "$REDIS_CONF"
 systemctl restart redis-server

 echo "--> Setting config.php..."
-if [ ! -z "$ISO3166_CODE" ]; then
-  sed -i "/);/i \ \ 'default_phone_region' => '$ISO3166_CODE'," $NC_CONFIG
+if [ -n "$ISO3166_CODE" ]; then
+  sed -i "/);/i \ \ 'default_phone_region' => '$ISO3166_CODE'," "$NC_CONFIG"
 fi
-sed -i "/);/i \ \ 'filelocking.enabled' => 'true'," $NC_CONFIG
-sed -i "/);/i \ \ 'memcache.locking' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
-sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
-sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
-sed -i "/);/i \ \ 'memcache.distributed' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
-sed -i "/);/i \ \ 'redis' =>" $NC_CONFIG
-sed -i "/);/i \ \ \ \ array (" $NC_CONFIG
-sed -i "/);/i \ \ \ \ \ 'host' => '/var/run/redis/redis.sock'," $NC_CONFIG
-sed -i "/);/i \ \ \ \ \ 'port' => 0," $NC_CONFIG
-sed -i "/);/i \ \ \ \ \ 'timeout' => 0," $NC_CONFIG
-sed -i "/);/i \ \ )," $NC_CONFIG
+sed -i "/);/i \ \ 'filelocking.enabled' => 'true'," "$NC_CONFIG"
+sed -i "/);/i \ \ 'memcache.locking' => '\\\OC\\\Memcache\\\Redis'," "$NC_CONFIG"
+sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," "$NC_CONFIG"
+sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," "$NC_CONFIG"
+sed -i "/);/i \ \ 'memcache.distributed' => '\\\OC\\\Memcache\\\Redis'," "$NC_CONFIG"
+sed -i "/);/i \ \ 'redis' =>" "$NC_CONFIG"
+sed -i "/);/i \ \ \ \ array (" "$NC_CONFIG"
+sed -i "/);/i \ \ \ \ \ 'host' => '/var/run/redis/redis.sock'," "$NC_CONFIG"
+sed -i "/);/i \ \ \ \ \ 'port' => 0," "$NC_CONFIG"
+sed -i "/);/i \ \ \ \ \ 'timeout' => 0," "$NC_CONFIG"
+sed -i "/);/i \ \ )," "$NC_CONFIG"
 echo "Done
 "
 echo "
 Addding & Setting up Files External App for Local storage...
 "
-sudo -u www-data php $NC_PATH/occ app:install files_external
-sudo -u www-data php $NC_PATH/occ app:enable files_external
-sudo -u www-data php $NC_PATH/occ app:disable support
-sudo -u www-data php $NC_PATH/occ files_external:import /tmp/jra-nc-app-ef.json
+sudo -u www-data php "$NC_PATH"/occ app:install files_external
+sudo -u www-data php "$NC_PATH"/occ app:enable files_external
+sudo -u www-data php "$NC_PATH"/occ app:disable support
+sudo -u www-data php "$NC_PATH"/occ files_external:import /tmp/jra-nc-app-ef.json

 usermod -a -G jibri www-data
-chmod -R 770 $DIR_RECORD
-chmod -R g+s $DIR_RECORD
+chmod -R 770 "$DIR_RECORD"
+chmod -R g+s "$DIR_RECORD"

 echo "
 Fixing possible missing tables...
 "
-echo "y"|sudo -u www-data php $NC_PATH/occ db:convert-filecache-bigint
-sudo -u www-data php $NC_PATH/occ db:add-missing-indices
-sudo -u www-data php $NC_PATH/occ db:add-missing-columns
+echo "y"|sudo -u www-data php "$NC_PATH"/occ db:convert-filecache-bigint
+sudo -u www-data php "$NC_PATH"/occ db:add-missing-indices
+sudo -u www-data php "$NC_PATH"/occ db:add-missing-columns

 echo "
 Adding trusted domain...
 "
-sudo -u www-data php $NC_PATH/occ config:system:set trusted_domains 0 --value=$NC_DOMAIN
+sudo -u www-data php "$NC_PATH"/occ config:system:set trusted_domains 0 --value="$NC_DOMAIN"

 echo "Setting JRA domain on jitsi-updater.sh"
-cd ~/quick-jibri-installer
+cd ~/quick-jibri-installer || exit
 sed -i "s|NC_DOMAIN=.*|NC_DOMAIN=\"$NC_DOMAIN\"|" jitsi-updater.sh

 echo "Quick Nextcloud installation complete!"
--- a/quick_jibri_installer.sh
+++ b/quick_jibri_installer.sh
@ -26,12 +26,12 @@ NGINX=$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed")
 DIST=$(lsb_release -sc)
 GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list"
 GOOGLE_ACTIVE_REPO=$(apt-cache policy | awk '/chrome/{print$3}' | awk -F "/" 'NR==1{print$2}')
-PROSODY_REPO=$(apt-cache policy | awk '/prosody/{print$3}' | awk -F "/" 'NR==1{print$2}')
+PROSODY_REPO="$(apt-cache policy | awk '/prosody/{print$3}' | awk -F "/" 'NR==1{print$2}')"
 PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
-CR=`echo $'\n> '`
+NL="$(echo -e '\n> ')"

 exit_ifinstalled() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
    echo "
 This instance already has $1 installed, exiting...
 Please try again on a clean system.
@ -53,11 +53,11 @@ rename_distro etiona bionic
 rename_distro nabia  focal

 install_ifnot() {
-if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
    echo " $1 is installed, skipping..."
    else
        echo -e "\n---- Installing $1 ----"
-        apt-get -yq2 install $1
+        apt-get -yq2 install "$1"
 fi
 }
 check_serv() {
@ -96,16 +96,16 @@ else
 #-----------------------------------------------------------------------"
 #Test tool
  if [ "$MODE" = "debug" ]; then
-    bash $PWD/tools/test-jibri-env.sh -m debug
+    bash "$PWD"/tools/test-jibri-env.sh -m debug
  else
-    bash $PWD/tools/test-jibri-env.sh
+    bash "$PWD"/tools/test-jibri-env.sh
  fi
 read -n 1 -s -r -p "Press any key to continue..."$'\n'
 fi
 }
 # sed limiters for add-jibri-node.sh variables
 var_dlim() {
-    grep -n $1 add-jibri-node.sh|head -n1|cut -d ":" -f1
+    grep -n "$1" add-jibri-node.sh|head -n1|cut -d ":" -f1
 }
 add_prosody_repo() {
 echo "Add Prosody repo"
@ -117,7 +117,7 @@ else
 fi
 }
 dpkg-compare() {
-dpkg --compare-versions $(dpkg-query -f='${Version}' --show $1) $2 $3
+dpkg --compare-versions "$(dpkg-query -f='${Version}' --show "$1")" "$2" "$3"
 }
 wait_seconds() {
 secs=$(($1))
@ -148,7 +148,7 @@ Wiki and documentation: https://github.com/switnet-ltd/quick-jibri-installer/wik
 read -n 1 -s -r -p "Press any key to continue..."$'\n'

 #Check if user is root
-if ! [ $(id -u) = 0 ]; then
+if ! [ "$(id -u)" = 0 ]; then
   echo "You need to be root or have sudo privileges!"
   exit 0
 fi
@ -188,8 +188,8 @@ else
  CPU_MIN="Y"
 fi
 ### Test RAM size (8GB min) ###
-mem_available=$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')
-if [ ${mem_available} -lt 7700000 ]; then
+mem_available="$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')"
+if [ "$mem_available" -lt 7700000 ]; then
  echo "
 Warning!: The system do not meet the minimum RAM requirements for Jibri to run.
 >> We recommend 8GB RAM for Jibri!
@ -209,7 +209,7 @@ else
    echo "Even when you can use the videoconferencing sessions, we advice to increase the resources in order to user Jibri."
    while [[ "$CONTINUE_LOW_RES" != "yes" && "$CONTINUE_LOW_RES" != "no" ]]
    do
-    read -p "> Do you want to continue?: (yes or no)"$'\n' -r CONTINUE_LOW_RES
+    read -p "> Do you want to continue?: (yes or no)$NL" -r CONTINUE_LOW_RES
    if [ "$CONTINUE_LOW_RES" = "no" ]; then
            echo "See you next time with more resources!..."
            exit
@ -240,7 +240,7 @@ So you can add a Jibri server on a instance with enough resources.\n"

    while [[ "$DISABLE_LOCAL_JIBRI" != "yes" && "$DISABLE_LOCAL_JIBRI" != "no" ]]
    do
-    read -p "> Do you want to disable local jibri service?: (yes or no)"$'\n' -r DISABLE_LOCAL_JIBRI
+    read -p "> Do you want to disable local jibri service?: (yes or no)$NL" -r DISABLE_LOCAL_JIBRI
    if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then
            echo -e "Please keep in mind that we might not support underpowered servers.\n"
    elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
@ -254,10 +254,10 @@ echo "Checking system oriented purpose....
 "
 apt-get -yq2 update
 SYSTEM_DE="$(apt-cache search "ubuntu-(desktop|mate-desktop)"|awk '{print$1}'|xargs|sed 's|$| trisquel triskel trisquel-mini|')"
-SYSTEM_DE_ARRAY=( $SYSTEM_DE )
+SYSTEM_DE_ARRAY=( "$SYSTEM_DE" )
 for de in "${SYSTEM_DE_ARRAY[@]}"
 do
-    if [ "$(dpkg-query -W -f='${Status}' $de 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+    if [ "$(dpkg-query -W -f='${Status}' "$de" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
        echo -e "\n > This instance has $de installed, exiting...
 \nPlease avoid using this installer on a desktop-user oriented GNU/Linux system.
 This is an unsupported use, as it will likely BREAK YOUR SYSTEM, so please don't."
@ -282,8 +282,8 @@ fi
 #Default to LE SSL?
 while [[ "$LE_SSL" != "yes" && "$LE_SSL" != "no" ]]
 do
-read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)"$'\n' -r LE_SSL
-if [ $LE_SSL = yes ]; then
+read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)$NL" -r LE_SSL
+if [ "$LE_SSL" = yes ]; then
  echo "We'll default to Let's Encrypt SSL certs."
 else
  echo "We'll let you choose later on for it.
@ -294,8 +294,8 @@ done
 if [ "$LE_SSL" = "yes" ]; then
  while [[ "$ANS_JD" != "yes" ]]
  do
-    read -p "> Please set your domain (or subdomain) here: (e.g.: jitsi.domain.com)"$'\n' -r JITSI_DOMAIN
-    read -p "> Did you mean?: $JITSI_DOMAIN (yes or no)"$'\n' -r ANS_JD
+    read -p "> Please set your domain (or subdomain) here: (e.g.: jitsi.domain.com)$NL" -r JITSI_DOMAIN
+    read -p "> Did you mean?: $JITSI_DOMAIN (yes or no)$NL" -r ANS_JD
    if [ "$ANS_JD" = "yes" ]; then
      echo "Alright, let's use $JITSI_DOMAIN."
    else
@ -303,13 +303,13 @@ if [ "$LE_SSL" = "yes" ]; then
    fi
  done
  #Simple DNS test
-    if [ "$PUBLIC_IP" = "$(dig -4 +short $JITSI_DOMAIN||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
+    if [ "$PUBLIC_IP" = "$(dig -4 +short "$JITSI_DOMAIN"||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
        echo "Server public IP  & DNS record for $JITSI_DOMAIN seems to match, continuing...
 "
    else
       echo "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN don't seem to match."
    echo "  > Please check your dns records are applied and updated, otherwise components may fail."
-      read -p "  > Do you want to continue?: (yes or no)"$'\n' -r DNS_CONTINUE
+      read -p "  > Do you want to continue?: (yes or no)$NL" -r DNS_CONTINUE
        if [ "$DNS_CONTINUE" = "yes" ]; then
          echo "  - We'll continue anyway..."
        else
@ -348,15 +348,15 @@ apt-get -y install \
 fi

 echo "# Check and Install HWE kernel if possible..."
-HWE_VIR_MOD=$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr) 2>/dev/null|head -n1|grep -c "hwe-$(lsb_release -sr)")
+HWE_VIR_MOD="$(apt-cache madison linux-image-generic-hwe-"$(lsb_release -sr)" 2>/dev/null|head -n1|grep -c "hwe-$(lsb_release -sr)")"
 if [ "$HWE_VIR_MOD" = "1" ]; then
    apt-get -y install \
-    linux-image-generic-hwe-$(lsb_release -sr) \
-    linux-tools-generic-hwe-$(lsb_release -sr)
+    linux-image-generic-hwe-"$(lsb_release -sr)" \
+    linux-tools-generic-hwe-"$(lsb_release -sr)"
 else
    apt-get -y install \
    linux-image-generic \
-    linux-modules-extra-$(uname -r)
+    linux-modules-extra-"$(uname -r)"
 fi

 check_serv
@ -373,7 +373,7 @@ fi
 apt-get -y install \
                jitsi-meet \
                jibri \
-                openjdk-8-jre-headless
+                openjdk-11-jre-headless

 # Fix RAND_load_file error
 #https://github.com/openssl/openssl/issues/7754#issuecomment-444063355
@ -409,7 +409,7 @@ if [ "$GOOGLE_ACTIVE_REPO" = "main" ]; then
 else
    echo "Installing Google Chrome Stable"
    wget -q -O - https://dl.google.com/linux/linux_signing_key.pub | apt-key add -
-    echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee $GOOGL_REPO
+    echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee "$GOOGL_REPO"
 fi
 apt-get -q2 update
 apt-get install -yq2 google-chrome-stable
@ -419,7 +419,7 @@ if [ -f /usr/local/bin/chromedriver ]; then
    echo "Chromedriver already installed."
 else
    echo "Installing Chromedriver"
-    wget -q https://chromedriver.storage.googleapis.com/$CHD_LTST/chromedriver_linux64.zip \
+    wget -q https://chromedriver.storage.googleapis.com/"$CHD_LTST"/chromedriver_linux64.zip \
         -O /tmp/chromedriver_linux64.zip
    unzip -o /tmp/chromedriver_linux64.zip -d /usr/local/bin/
    chown root:root /usr/local/bin/chromedriver
@ -437,13 +437,13 @@ echo "
 Remove Chrome warning...
 "
 mkdir -p /etc/opt/chrome/policies/managed
-echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > $GCMP_JSON
+echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > "$GCMP_JSON"

 ## JMS system tune up
 if [ "$MODE" = "debug" ]; then
-    bash $PWD/mode/jms-stu.sh -m debug
+    bash "$PWD"/mode/jms-stu.sh -m debug
 else
-    bash $PWD/mode/jms-stu.sh
+    bash "$PWD"/mode/jms-stu.sh
 fi

 echo '
@ -452,7 +452,7 @@ echo '
 ########################################################################
 '
 # MEET / JIBRI SETUP
-DOMAIN="$(find /etc/prosody/conf.d/ -name *.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
 JB_AUTH_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)"
 JB_REC_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)"
@ -463,7 +463,7 @@ MEET_CONF="/etc/jitsi/meet/$DOMAIN-config.js"
 JIBRI_CONF="/etc/jitsi/jibri/jibri.conf"
 JVB2_CONF="/etc/jitsi/videobridge/config"
 JVB2_SIP="/etc/jitsi/videobridge/sip-communicator.properties"
-DIR_RECORD=/var/jbrecord
+DIR_RECORD="/var/jbrecord"
 REC_DIR="/home/jibri/finalize_recording.sh"
 JB_NAME="Jibri Sessions"
 LE_RENEW_LOG="/var/log/letsencrypt/renew.log"
@ -480,10 +480,10 @@ FQDN_HOST="fqdn"
 JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf"

 # Rename hostname for jitsi server
-while [[ "$FQDN_HOST" != "yes" && "$FQDN_HOST" != "no" && ! -z "$FQDN_HOST" ]]
+while [[ "$FQDN_HOST" != "yes" && "$FQDN_HOST" != "no" && -n "$FQDN_HOST" ]]
 do
  echo -e "> Set $DOMAIN as a fqdn hostname?: (yes or no)\n" && \
-  read -p "Leave empty to default to your current one ($(hostname -f)): "$'\n' FQDN_HOST
+  read -p "Leave empty to default to your current one ($(hostname -f)):$NL" -r FQDN_HOST
  if [ "$FQDN_HOST" = "yes" ]; then
    echo "$DOMAIN will be used as fqdn hostname, changes will show on reboot."
    hostnamectl set-hostname "${DOMAIN}"
@ -497,7 +497,7 @@ done
 if [ "$LE_SSL" = "yes" ]; then
  while [[ -z $SYSADMIN_EMAIL ]]
  do
-    read -p "Set sysadmin email (this is a mandatory field):"$'\n' -r SYSADMIN_EMAIL
+    read -p "Set sysadmin email (this is a mandatory field):$NL" -r SYSADMIN_EMAIL
  done
 fi
 #Language
@ -508,21 +508,21 @@ See here:
 https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json

 Jitsi Meet web interface will be set to use such language."
-read -p "Please set your language (Press enter to default to 'en'):"$'\n' -r JB_LANG
+read -p "Please set your language (Press enter to default to 'en'):$NL" -r JB_LANG
 echo -e "\nWe'll take a minute to localize some UI excerpts if you need.\n"
 #Participant
 echo -e "> Do you want to translate 'Participant' to your own language?" && \
-read -p "Leave empty to use the default one (English): "$'\n' L10N_PARTICIPANT
+read -p "Leave empty to use the default one (English):$NL" -r L10N_PARTICIPANT
 #Me
 echo -e "\n> Do you want to translate 'me' to your own language?
 This must be a really small word to present one self.
 Some suggestions might be: yo (Spanish) | je (French) | ich (German)\n" && \
-read -p "Leave empty to use the default one (English): "$'\n' L10N_ME
+read -p "Leave empty to use the default one (English):$NL" -r L10N_ME

 #Drop unsecure TLS
 while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]]
 do
-    read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)"$'\n' -r DROP_TLS1
+    read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)$NL" -r DROP_TLS1
    if [ "$DROP_TLS1" = "no" ]; then
        echo "TLSv1.0/1.1 will remain."
    elif [ "$DROP_TLS1" = "yes" ]; then
@ -542,7 +542,7 @@ done
 #Brandless  Mode
 while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]]
 do
-    read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)"$'\n' -r ENABLE_BLESSM
+    read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)$NL" -r ENABLE_BLESSM
    if [ "$ENABLE_BLESSM" = "no" ]; then
        echo "Brandless mode won't be set."
    elif [ "$ENABLE_BLESSM" = "yes" ]; then
@ -552,7 +552,7 @@ done
 #Welcome Page
 while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]]
 do
-    read -p "> Do you want to disable the Welcome page: (yes or no)"$'\n' -r ENABLE_WELCP
+    read -p "> Do you want to disable the Welcome page: (yes or no)$NL" -r ENABLE_WELCP
    if [ "$ENABLE_WELCP" = "yes" ]; then
        echo "Welcome page will be disabled."
    elif [ "$ENABLE_WELCP" = "no" ]; then
@ -562,7 +562,7 @@ done
 #Close page
 while [[ "$ENABLE_CLOCP" != "yes" && "$ENABLE_CLOCP" != "no" ]]
 do
-    read -p "> Do you want to enable the close page on room exit: (yes or no)"$'\n' -r ENABLE_CLOCP
+    read -p "> Do you want to enable the close page on room exit: (yes or no)$NL" -r ENABLE_CLOCP
    if [ "$ENABLE_CLOCP" = "yes" ]; then
        echo "Close page will be enabled."
    elif [ "$ENABLE_CLOCP" = "no" ]; then
@ -572,7 +572,7 @@ done
 #Enable static avatar
 while [[ "$ENABLE_SA" != "yes" && "$ENABLE_SA" != "no" ]]
 do
-    read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)"$'\n' -r ENABLE_SA
+    read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)$NL" -r ENABLE_SA
    if [ "$ENABLE_SA" = "no" ]; then
        echo "Static avatar won't be enabled"
    elif [ "$ENABLE_SA" = "yes" ]; then
@ -644,7 +644,7 @@ fi
 while [[ "$ENABLE_NC_ACCESS" != "yes" && "$ENABLE_NC_ACCESS" != "no" ]]
 do
    read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_NC_ACCESS
+( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS
    if [ "$ENABLE_NC_ACCESS" = "no" ]; then
    	echo -e "-- JRA via Nextcloud won't be enabled.\n"
    elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
@ -652,15 +652,15 @@ do
    fi
 done
 #Jigasi
-if [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "404" ]; then
+if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then
    echo "> Sorry Google SDK doesn't have support yet for $(lsb_release -sd),
    thus, Jigasi Transcript can't be enable.
 "
-elif [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "200" ]; then
+elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then
    while [[ "$ENABLE_TRANSCRIPT" != "yes" && "$ENABLE_TRANSCRIPT" != "no" ]]
    do
        read -p "> Do you want to setup Jigasi Transcription: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_TRANSCRIPT
+( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
        if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
            echo -e "-- Jigasi Transcription won't be enabled.\n"
        elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
@ -675,7 +675,7 @@ fi
 while [[ "$ENABLE_GRAFANA_DSH" != "yes" && "$ENABLE_GRAFANA_DSH" != "no" ]]
 do
 read -p "> Do you want to setup Grafana Dashboard: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_GRAFANA_DSH
+( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH
 if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then
    echo -e "-- Grafana Dashboard won't be enabled.\n"
 elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
@ -685,7 +685,7 @@ done
 #Docker Etherpad
 while [[ "$ENABLE_DOCKERPAD" != "yes" && "$ENABLE_DOCKERPAD" != "no" ]]
 do
-read -p "> Do you want to setup Docker Etherpad: (yes or no)"$'\n' -r ENABLE_DOCKERPAD
+read -p "> Do you want to setup Docker Etherpad: (yes or no)$NL" -r ENABLE_DOCKERPAD
 if [ "$ENABLE_DOCKERPAD" = "no" ]; then
    echo -e "-- Docker Etherpad won't be enabled.\n"
 elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then
@ -701,17 +701,16 @@ echo '
 JibriBrewery=JibriBrewery
 INT_CONF="/usr/share/jitsi-meet/interface_config.js"
 INT_CONF_ETC="/etc/jitsi/meet/$DOMAIN-interface_config.js"
-WAN_IP=$(dig +short myip.opendns.com @resolver1.opendns.com)

 ssl_wa() {
 if [ "$LE_SSL" = "yes" ]; then
-  systemctl stop $1
-  letsencrypt certonly --standalone --renew-by-default --agree-tos --email $5 -d $6
-  sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" $4
-  sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" $4
-  systemctl restart $1
+  systemctl stop "$1"
+  letsencrypt certonly --standalone --renew-by-default --agree-tos --email "$5" -d "$6"
+  sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" "$4"
+  sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" "$4"
+  systemctl restart "$1"
  #Add cron
-  if [ $(crontab -l|sed 's|#.*$||g'|grep -c 'weekly certbot renew') = 0 ];then
+  if [ "$(crontab -l|sed 's|#.*$||g'|grep -c 'weekly certbot renew')" = 0 ];then
    crontab -l | { cat; echo "@weekly certbot renew --${2} > $LE_RENEW_LOG 2>&1"; } | crontab -
  else
    echo "Crontab seems to be already in place, skipping."
@ -735,13 +734,13 @@ if [ "$LE_SSL" = "yes" ]; then
        echo -e "\nCertbot repository already on the system!\nChecking for updates...\n"
        apt-get -q2 update
        apt-get -yq2 dist-upgrade
-    elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "200" ]; then
+    elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "200" ]; then
        echo -e "\nAdding cerbot (formerly letsencrypt) PPA repository for latest updates\n"
        echo "deb http://ppa.launchpad.net/certbot/certbot/ubuntu $DIST main" > /etc/apt/sources.list.d/certbot.list
        apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 75BCA694
        apt-get -q2 update
        apt-get -yq2 dist-upgrade
-    elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "404" ]; then
+    elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$CERTBOT_REL_FILE" )" == "404" ]; then
        echo -e "\nCertbot PPA is not available for $(lsb_release -sc) just yet, it won't be installed...\n"
    fi
 else
@ -773,9 +772,9 @@ sed -i "/shard.HOSTNAME/s|localhost|$DOMAIN|" /etc/jitsi/videobridge/sip-communi

 # Configure Jibri
 if [ "$ENABLE_SC" = "yes" ]; then
-  if [ ! -f $MOD_LIST_FILE ]; then
+  if [ ! -f "$MOD_LIST_FILE" ]; then
  echo -e "\n-> Adding external module to list prosody users...\n"
-  curl -s $MOD_LISTU > $MOD_LIST_FILE
+  curl -s "$MOD_LISTU" > "$MOD_LIST_FILE"

  echo -e "Now you can check registered users with:\nprosodyctl mod_listusers\n"
    else
@ -784,7 +783,7 @@ if [ "$ENABLE_SC" = "yes" ]; then

 fi
 #Enable jibri recording
-cat  << REC-JIBRI >> $PROSODY_FILE
+cat  << REC-JIBRI >> "$PROSODY_FILE"

 VirtualHost "recorder.$DOMAIN"
  modules_enabled = {
@ -795,71 +794,71 @@ VirtualHost "recorder.$DOMAIN"
 REC-JIBRI

 #Enable Jibri withelist
-sed -i "s|-- muc_lobby_whitelist|muc_lobby_whitelist|" $PROSODY_FILE
+sed -i "s|-- muc_lobby_whitelist|muc_lobby_whitelist|" "$PROSODY_FILE"

 #Fix Jibri conectivity issues
-sed -i "s|c2s_require_encryption = .*|c2s_require_encryption = false|" $PROSODY_SYS
+sed -i "s|c2s_require_encryption = .*|c2s_require_encryption = false|" "$PROSODY_SYS"
 sed -i "/c2s_require_encryption = false/a \\
 \\
-consider_bosh_secure = true" $PROSODY_SYS
+consider_bosh_secure = true" "$PROSODY_SYS"

-if [ ! -z $L10N_PARTICIPANT ]; then
+if [ -n "$L10N_PARTICIPANT" ]; then
    sed -i "s|PART_USER=.*|PART_USER=\"$L10N_PARTICIPANT\"|" jm-bm.sh
 fi
-if [ ! -z $L10N_ME ]; then
+if [ -n "$L10N_ME" ]; then
    sed -i "s|LOCAL_USER=.*|LOCAL_USER=\"$L10N_ME\"|" jm-bm.sh
 fi


 ### Prosody users
-prosodyctl register jibri auth.$DOMAIN $JB_AUTH_PASS
-prosodyctl register recorder recorder.$DOMAIN $JB_REC_PASS
+prosodyctl register jibri auth."$DOMAIN" "$JB_AUTH_PASS"
+prosodyctl register recorder recorder."$DOMAIN" "$JB_REC_PASS"

 ## JICOFO
 # /etc/jitsi/jicofo/sip-communicator.properties
-cat  << BREWERY >> $JICOFO_SIP
+cat  << BREWERY >> "$JICOFO_SIP"
 #org.jitsi.jicofo.auth.URL=XMPP:$DOMAIN
 #org.jitsi.jicofo.auth.URL=EXT_JWT:$DOMAIN
-org.jitsi.jicofo.jibri.BREWERY=$JibriBrewery@internal.auth.$DOMAIN
+org.jitsi.jicofo.jibri.BREWERY="$JibriBrewery"@internal.auth."$DOMAIN"
 org.jitsi.jicofo.jibri.PENDING_TIMEOUT=90
 #org.jitsi.jicofo.auth.DISABLE_AUTOLOGIN=true
 BREWERY

 # Jibri tweaks for /etc/jitsi/meet/$DOMAIN-config.js
-sed -i "s|conference.$DOMAIN|internal.auth.$DOMAIN|" $MEET_CONF
-sed -i "s|// fileRecordingsEnabled: false,|fileRecordingsEnabled: true,| " $MEET_CONF
+sed -i "s|conference.$DOMAIN|internal.auth.$DOMAIN|" "$MEET_CONF"
+sed -i "s|// fileRecordingsEnabled: false,|fileRecordingsEnabled: true,| " "$MEET_CONF"
 sed -i "s|// liveStreamingEnabled: false,|liveStreamingEnabled: true,\\
 \\
-    hiddenDomain: \'recorder.$DOMAIN\',|" $MEET_CONF
+    hiddenDomain: \'recorder.$DOMAIN\',|" "$MEET_CONF"

 #Dropbox feature
 #if [ "$ENABLE_DB" = "yes" ]; then
-#DB_STR=$(grep -n "dropbox:" $MEET_CONF | cut -d ":" -f1)
+#DB_STR=$(grep -n "dropbox:" "$MEET_CONF" | cut -d ":" -f1)
 #DB_END=$((DB_STR + 10))
-#sed -i "$DB_STR,$DB_END{s|// dropbox: {|dropbox: {|}" $MEET_CONF
-#sed -i "$DB_STR,$DB_END{s|//     appKey: '<APP_KEY>'|appKey: \'$DB_CID\'|}" $MEET_CONF
-#sed -i "$DB_STR,$DB_END{s|// },|},|}" $MEET_CONF
+#sed -i "$DB_STR,$DB_END{s|// dropbox: {|dropbox: {|}" "$MEET_CONF"
+#sed -i "$DB_STR,$DB_END{s|//     appKey: '<APP_KEY>'|appKey: \'$DB_CID\'|}" "$MEET_CONF"
+#sed -i "$DB_STR,$DB_END{s|// },|},|}" "$MEET_CONF"
 #fi

 #Setup main language
-if [ -z $JB_LANG ] || [ "$JB_LANG" = "en" ]; then
+if [ -z "$JB_LANG" ] || [ "$JB_LANG" = "en" ]; then
    echo "Leaving English (en) as default language..."
-    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: 'en',|" $MEET_CONF
+    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: 'en',|" "$MEET_CONF"
 else
    echo "Changing default language to: $JB_LANG"
-    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: \'$JB_LANG\',|" $MEET_CONF
+    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: \'$JB_LANG\',|" "$MEET_CONF"
 fi

 # Recording directory
-if [ ! -d $DIR_RECORD ]; then
-    mkdir $DIR_RECORD
+if [ ! -d "$DIR_RECORD" ]; then
+    mkdir "$DIR_RECORD"
 fi
-chown -R jibri:jibri $DIR_RECORD
+chown -R jibri:jibri "$DIR_RECORD"

-cat << REC_DIR > $REC_DIR
+cat << REC_DIR > "$REC_DIR"
 #!/bin/bash

-RECORDINGS_DIR=$DIR_RECORD
+RECORDINGS_DIR="$DIR_RECORD"

 echo "This is a dummy finalize script" > /tmp/finalize.out
 echo "The script was invoked with recordings directory $RECORDINGS_DIR." >> /tmp/finalize.out
@ -875,12 +874,12 @@ mv \$LJF_PATH \$NJF_PATH

 exit 0
 REC_DIR
-chown jibri:jibri $REC_DIR
-chmod +x $REC_DIR
+chown jibri:jibri "$REC_DIR"
+chmod +x "$REC_DIR"

 ## New Jibri Config (2020)
-mv $JIBRI_CONF ${JIBRI_CONF}-dpkg-file
-cat << NEW_CONF > $JIBRI_CONF
+mv "$JIBRI_CONF" ${JIBRI_CONF}-dpkg-file
+cat << NEW_CONF > "$JIBRI_CONF"
 // New XMPP environment config.
 jibri {
    streaming {
@ -927,8 +926,8 @@ jibri {
        default-call-empty-timeout = 30 seconds
    }
    recording {
-         recordings-directory = $DIR_RECORD
-         finalize-script = $REC_DIR
+         recordings-directory = "$DIR_RECORD"
+         finalize-script = "$REC_DIR"
    }
    api {
        xmpp {
@ -993,14 +992,14 @@ jibri {
 NEW_CONF

 #Jibri xorg resolution
-sed -i "s|[[:space:]]Virtual .*|Virtual $JIBRI_RES_XORG_CONF|" $JIBRI_XORG_CONF
+sed -i "s|[[:space:]]Virtual .*|Virtual $JIBRI_RES_XORG_CONF|" "$JIBRI_XORG_CONF"

 #Create receiver user
-useradd -m -g jibri $MJS_USER
+useradd -m -g jibri "$MJS_USER"
 echo "$MJS_USER:$MJS_USER_PASS" | chpasswd

 #Create ssh key and restrict connections
-sudo su $MJS_USER -c "ssh-keygen -t rsa -f ~/.ssh/id_rsa -b 4096 -o -a 100 -q -N ''"
+sudo su "$MJS_USER" -c "ssh-keygen -t rsa -f ~/.ssh/id_rsa -b 4096 -o -a 100 -q -N ''"
 #Allow password authentication
 sed -i "s|PasswordAuthentication .*|PasswordAuthentication yes|" /etc/ssh/sshd_config
 systemctl restart sshd
@ -1022,7 +1021,7 @@ echo "Last file edition at: $(grep "LETS:" add-jibri-node.sh|head -n1|awk -F'LET

 #-- Setting variables for add-jvb2-node.sh
 g_conf_value() {
-  grep "$1" $JVB2_CONF|sed "s|$1||"
+  grep "$1" "$JVB2_CONF"|sed "s|$1||"
 }
 JVB_HOSTNAME=$(g_conf_value JVB_HOSTNAME=)
 JVB_HOST=$(g_conf_value JVB_HOST=)
@ -1032,7 +1031,7 @@ JVB_OPTS=$(g_conf_value JVB_OPTS=)
 JAVA_SYS_PROPS=$(g_conf_value JAVA_SYS_PROPS=)

 g_sip_value() {
-  grep "$1" $JVB2_SIP |cut -d "=" -f2 
+  grep "$1" "$JVB2_SIP" |cut -d "=" -f2
 }
 DISABLE_AWS_HARVESTER=$(g_sip_value DISABLE_AWS_HARVESTER=)
 STUN_MAPPING_HARVESTER_ADDRESSES=$(g_sip_value STUN_MAPPING_HARVESTER_ADDRESSES=)
@ -1066,26 +1065,26 @@ sed -i "s|MJS_USER_PASS=.*|MJS_USER_PASS=\"$MJS_USER_PASS\"|" add-jvb2-node.sh
 ##--

 #Tune webserver for Jitsi App control
-if [ -f $WS_CONF ]; then
-    sed -i "/# ensure all static content can always be found first/i \\\n" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location = \/external_api.min.js {" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" $WS_CONF
-    sed -i "/# ensure all static content can always be found first/i \\\n" $WS_CONF
+if [ -f "$WS_CONF" ]; then
+    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location = \/external_api.min.js {" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
    systemctl reload nginx
 else
    echo "No app configuration done to server file, please report to:
    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
 fi
 #Static avatar
-if [ "$ENABLE_SA" = "yes" ] && [ -f $WS_CONF ]; then
+if [ "$ENABLE_SA" = "yes" ] && [ -f "$WS_CONF" ]; then
    cp images/avatar2.png /usr/share/jitsi-meet/images/
-    sed -i "/location \/external_api.min.js/i \ \ \ \ location \~ \^\/avatar\/\(.\*\)\\\.png {" $WS_CONF
-    sed -i "/location \/external_api.min.js/i \ \ \ \ \ \ \ \ alias /usr/share/jitsi-meet/images/avatar2.png;" $WS_CONF
+    sed -i "/location \/external_api.min.js/i \ \ \ \ location \~ \^\/avatar\/\(.\*\)\\\.png {" "$WS_CONF"
+    sed -i "/location \/external_api.min.js/i \ \ \ \ \ \ \ \ alias /usr/share/jitsi-meet/images/avatar2.png;" "$WS_CONF"
    sed -i "/location \/external_api.min.js/i \ \ \ \ }\\
-\ " $WS_CONF
-    sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'https://$DOMAIN/avatar/\'|" $INT_CONF
-    sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" $INT_CONF
+\ " "$WS_CONF"
+    sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'https://$DOMAIN/avatar/\'|" "$INT_CONF"
+    sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" "$INT_CONF"
 fi
 #nginx -tlsv1/1.1
 if [ "$DROP_TLS1" = "yes" ];then
@ -1102,34 +1101,34 @@ fi

 ###Setup secure rooms
 if [ "$ENABLE_SC" = "yes" ]; then
-    SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" $PROSODY_FILE | awk -F ':' 'NR==1{print$1}')
+    SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" "$PROSODY_FILE" | awk -F ':' 'NR==1{print$1}')
    SRP_END=$((SRP_STR + 10))
-    sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_hashed\"|}" $PROSODY_FILE
-    sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" $MEET_CONF
+    sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_hashed\"|}" "$PROSODY_FILE"
+    sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" "$MEET_CONF"

    #Secure room initial user
-    read -p "Set username for secure room moderator: "$'\n' -r SEC_ROOM_USER
-    read -p "Secure room moderator password: "$'\n' -r SEC_ROOM_PASS
-    prosodyctl register $SEC_ROOM_USER $DOMAIN $SEC_ROOM_PASS
+    read -p "Set username for secure room moderator:$NL" -r SEC_ROOM_USER
+    read -p "Secure room moderator password:$NL" -r SEC_ROOM_PASS
+    prosodyctl register "$SEC_ROOM_USER" "$DOMAIN" "$SEC_ROOM_PASS"

    echo -e "\nSecure rooms are being enabled..."
    echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
 or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered.
 If you have issues with the password refer to your sysadmin."
-    sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" $JICOFO_SIP
+    sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" "$JICOFO_SIP"
    sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
 fi

 ###JWT
 if [ "$ENABLE_JWT" = "yes" ]; then
    echo -e "\nJWT auth is being setup..."
-    bash $PWD/mode/jwt.sh
+    bash "$PWD"/mode/jwt.sh
 fi

 #Guest allow
 #Change back lobby - https://community.jitsi.org/t/64769/136
 if [ "$ENABLE_SC" = "yes" ];then
-    cat << P_SR >> $PROSODY_FILE
+    cat << P_SR >> "$PROSODY_FILE"
 -- #Change back lobby - https://community.jitsi.org/t/64769/136
 VirtualHost "guest.$DOMAIN"
    authentication = "anonymous"
@ -1147,51 +1146,51 @@ fi
 #======================
 # Custom settings
 #Start with video muted by default
-sed -i "s|// startWithVideoMuted: false,|startWithVideoMuted: true,|" $MEET_CONF
+sed -i "s|// startWithVideoMuted: false,|startWithVideoMuted: true,|" "$MEET_CONF"

 #Start with audio muted but admin
-sed -i "s|// startAudioMuted: 10,|startAudioMuted: 1,|" $MEET_CONF
+sed -i "s|// startAudioMuted: 10,|startAudioMuted: 1,|" "$MEET_CONF"

 #Disable/enable welcome page
 if [ "$ENABLE_WELCP" = "yes" ]; then
-    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: false,|" $MEET_CONF
+    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: false,|" "$MEET_CONF"
 elif [ "$ENABLE_WELCP" = "no" ]; then
-    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: true,|" $MEET_CONF
+    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: true,|" "$MEET_CONF"
 fi
 #Enable close page
 if [ "$ENABLE_CLOCP" = "yes" ]; then
-    sed -i "s|.*enableClosePage:.*|    enableClosePage: true,|" $MEET_CONF
+    sed -i "s|.*enableClosePage:.*|    enableClosePage: true,|" "$MEET_CONF"
 elif [ "$ENABLE_CLOCP" = "no" ]; then
-    sed -i "s|.*enableClosePage:.*|    enableClosePage: false,|" $MEET_CONF
+    sed -i "s|.*enableClosePage:.*|    enableClosePage: false,|" "$MEET_CONF"
 fi

 #Add pre-join screen by default, since it improves YouTube autoplay capabilities
 #pre-join screen by itself don't require autorization by moderator, don't confuse with lobby which does.
-sed -i "s|// prejoinPageEnabled:.*|prejoinPageEnabled: true,|" $MEET_CONF
+sed -i "s|// prejoinPageEnabled:.*|prejoinPageEnabled: true,|" "$MEET_CONF"

 #Set HD resolution and widescreen format
-sed -i "/Enable \/ disable simulcast support/i \/\/ Start QJI - Set resolution and widescreen format" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ resolution: 720," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ constraints: {" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ aspectRatio: 16 \/ 9," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ video: {" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ height: {" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 720," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 720," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 180" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ width: {" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 1280," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 1280," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 320" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ }" $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ }," $MEET_CONF
-sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" $MEET_CONF
+sed -i "/Enable \/ disable simulcast support/i \/\/ Start QJI - Set resolution and widescreen format" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ resolution: 720," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ constraints: {" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ aspectRatio: 16 \/ 9," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ video: {" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ height: {" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 720," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 720," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 180" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ width: {" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 1280," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 1280," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 320" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ }," "$MEET_CONF"
+sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" "$MEET_CONF"

 #Check config file
 echo -e "\n# Checking $MEET_CONF file for errors\n"
-CHECKJS=$(esvalidate $MEET_CONF| cut -d ":" -f2)
+CHECKJS=$(esvalidate "$MEET_CONF"| cut -d ":" -f2)
 if [[ -z "$CHECKJS" ]]; then
    echo -e "\n# The $MEET_CONF configuration seems correct. =)\n"
 else
@ -1214,7 +1213,7 @@ if [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
    systemctl disable jibri-xorg
    systemctl disable jibri-icewm
 # Manually apply permissions since finalize_recording.sh won't be triggered under this server options.
-    chmod -R 770 $DIR_RECORD
+    chmod -R 770 "$DIR_RECORD"
 fi

 enable_letsencrypt
@ -1225,7 +1224,7 @@ chmod -R 650 /etc/prosody/certs/

 #SSL workaround
 if [ "$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed")" -eq 1 ]; then
-    ssl_wa nginx nginx $DOMAIN $WS_CONF $SYSADMIN_EMAIL $DOMAIN
+    ssl_wa nginx nginx "$DOMAIN" "$WS_CONF" "$SYSADMIN_EMAIL" "$DOMAIN"
    install_ifnot python3-certbot-nginx
 else
    echo "No webserver found please report."
@ -1234,19 +1233,19 @@ fi
 if [ "$ENABLE_BLESSM" = "yes" ]; then
    echo "Custom brandless mode will be enabled."
    sed -i "s|ENABLE_BLESSM=.*|ENABLE_BLESSM=\"on\"|" jitsi-updater.sh
-    bash $PWD/jm-bm.sh
+    bash "$PWD"/jm-bm.sh
 fi
 # Applying best practives for interface config.js
 echo -e "\n> Setting up custom interface_config.js according to best practices."
 cp "$INT_CONF" "$INT_CONF_ETC"

 #Tune webserver for interface_config.js
-if [ -f $WS_CONF ]; then
-    sed -i "/external_api.js/i \\\n" $WS_CONF
-    sed -i "/external_api.js/i \ \ \ \ location = \/interface_config.js {" $WS_CONF
-    sed -i "/external_api.js/i \ \ \ \ \ \ \ \ alias \/etc\/jitsi\/meet\/$DOMAIN-interface_config.js;" $WS_CONF
-    sed -i "/external_api.js/i \ \ \ \ }" $WS_CONF
-    sed -i "/external_api.js/i \\\n" $WS_CONF
+if [ -f "$WS_CONF" ]; then
+    sed -i "/external_api.js/i \\\n" "$WS_CONF"
+    sed -i "/external_api.js/i \ \ \ \ location = \/interface_config.js {" "$WS_CONF"
+    sed -i "/external_api.js/i \ \ \ \ \ \ \ \ alias \/etc\/jitsi\/meet\/$DOMAIN-interface_config.js;" "$WS_CONF"
+    sed -i "/external_api.js/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/external_api.js/i \\\n" "$WS_CONF"
    systemctl reload nginx
 else
    echo "No interface_config.js configuration done to server file, please report to:
@ -1254,11 +1253,11 @@ else
 fi
 #JRA via Nextcloud
 if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
-    echo -n "\nJRA via Nextcloud will be enabled."
+    echo -e "\nJRA via Nextcloud will be enabled."
    if [ "$MODE" = "debug" ]; then
-        bash $PWD/jra_nextcloud.sh -m debug
+        bash "$PWD"/jra_nextcloud.sh -m debug
    else
-        bash $PWD/jra_nextcloud.sh
+        bash "$PWD"/jra_nextcloud.sh
    fi
 fi
 }  > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2)
@ -1267,9 +1266,9 @@ if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
    echo -e "\nJigasi Transcription will be enabled."
    # ToDo: Analyze behavior on debug
    #if [ "$MODE" = "debug" ]; then
-    #    bash $PWD/jigasi.sh -m debug
+    #    bash "$PWD"/jigasi.sh -m debug
    #else
-    bash $PWD/jigasi.sh
+    bash "$PWD"/jigasi.sh
    #fi
 fi
 {
@ -1277,18 +1276,18 @@ fi
 if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
    echo -e "\nGrafana Dashboard will be enabled."
    if [ "$MODE" = "debug" ]; then
-        bash $PWD/grafana.sh -m debug
+        bash "$PWD"/grafana.sh -m debug
    else
-        bash $PWD/grafana.sh
+        bash "$PWD"/grafana.sh
    fi
 fi
 #Docker Etherpad
 if [ "$ENABLE_DOCKERPAD" = "yes" ]; then
    echo -e "\nDocker Etherpad will be enabled."
    if [ "$MODE" = "debug" ]; then
-        bash $PWD/etherpad-docker.sh -m debug
+        bash "$PWD"/etherpad-docker.sh -m debug
    else
-        bash $PWD/etherpad-docker.sh
+        bash "$PWD"/etherpad-docker.sh
    fi
 fi
 #Prevent JMS conecction issue