README.md

@@ -1,5 +1,5 @@
 # Quick Jibri Installer
-Bash installer for Jibri on supported **Ubuntu LTS** based systems using **nginx** as default webserver.
+Bash installer for Jitsi Meet standalone along with Jibri on supported **Ubuntu LTS** based systems using **nginx** as default webserver.
 
 ## Usage
 As for our current latest release, as we have integrated more and more features, we highly recommend to use a purpose specific-newly spawn server to host the jitsi-meet framework, making sure you stick to the requirements and recommendations as much as possible, in order to avoid issues.
@@ -13,6 +13,9 @@ git clone https://github.com/switnet-ltd/quick-jibri-installer
 cd quick-jibri-installer
 bash quick-jibri-installer.sh
 ```
+If your server meet the necessary resources, then at the end on the installer you should have a working Jitsi Meet Server along with a Jibri server ready to record.
+
+Additional jibris need to be set on separate servers, only necesary on simultaneous recordings for that please use add-jibri-node.sh.
 
 ### Add Jibri node
 
@@ -24,6 +27,8 @@ Copy the modified `add-jibri-node.sh` file from your early cloned installation d
 bash add-jibri-node.sh
 ```
 
+Please remember that on newer versions, jibri will record on FHD (1920x1080) so please make sure your server have enough CPU power in orther to handle the encoding load.
+
 ### Add JVB2 node
 
 Copy the modified `add-jvb2-node.sh` file from your early cloned installation directory once the installation is completed, to the new server meant to be a jibri node using your preferred method, then run it
@@ -40,7 +45,7 @@ Check more details on our wiki.
 * Clean VM/VPS/Server using a supported Ubuntu LTS
 * Valid domain with DNS record, **mandatory** for SSL certs via Let's Encrypt.
 * Ports open for ACME (SSL) interaction & validation.
-* Highly recommended: 8 GB RAM / 4 Cores.
+* Highly recommended: Above 8 GB RAM / 4 Cores.
 * Webcam
 
 ### Jigasi Transcript

add-jibri-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Jibri Node Aggregator
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

add-jvb2-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JVB2 Node Aggregator
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

etherpad.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Etherpad Installer for Jitsi Meet
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 #
 # GPLv3 or later.
 

grafana.sh

@@ -7,8 +7,8 @@
 # - https://grafana.com/grafana/dashboards/11969
 # by "mephisto"
 #
-# Igor Kerstges © - 2020
+# Igor Kerstges © - 2021
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 #
 # GPLv3 or later.
 

jitsi-updater.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet recurring upgrader and customization keeper
 # for Debian/*buntu binaries.
-# 2020 - SwITNet Ltd
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.
 
 Blue='\e[0;34m'

jm-bm.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet brandless mode
 # for Debian/*buntu binaries.
-# 2020 - SwITNet Ltd
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.
 
 DOMAIN="$(ls /etc/prosody/conf.d/ | awk -F'.cfg' '!/localhost/{print $1}' | awk '!NF || !seen[$0]++')"

jra_nextcloud.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JRA (Jibri Recordings Access) via Nextcloud
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 while getopts m: option
 do

mode/chp-mode.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Custom High Performance Jitsi conf
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 
 #Check if user is root

mode/grid/selenium-grid-docker.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Custom Selenium Grid-Node fro Jitsi Meet
 # Pandian © - https://community.jitsi.org/u/Pandian
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 
 #Check if user is root

mode/jwt.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JWT Mode Setup
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 DOMAIN=$(ls /etc/prosody/conf.d/ | grep -v localhost | awk -F'.cfg' '{print $1}' | awk '!NF || !seen[$0]++')
 MEET_CONF="/etc/jitsi/meet/$DOMAIN-config.js"
@@ -42,9 +42,14 @@ sed -i "s|c2s_require_encryption = true|c2s_require_encryption = false|" $PROSOD
 sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"token\"|}" $PROSODY_FILE
 sed -i "s|--app_id=\"example_app_id\"|app_id=\"$APP_ID\"|" $PROSODY_FILE
 sed -i "s|--app_secret=\"example_app_secret\"|app_secret=\"$SECRET_APP\"|" $PROSODY_FILE
-sed -i "/app_secret/a \ \ \ \ \ \ \ \ asap_accepted_issuers = { \"$APP_ID\" }" $PROSODY_FILE
+sed -i "/app_secret/a \\\\" $PROSODY_FILE
-sed -i "/app_secret/a \ \ \ \ \ \ \ \ asap_accepted_audiences = { \"$APP_ID\", \"RocketChat\" }" $PROSODY_FILE
+sed -i "/app_secret/a \ \ \ \ allow_empty_token = false" $PROSODY_FILE
-#allow_empty_token = false
+sed -i "/app_secret/a \\\\" $PROSODY_FILE
+sed -i "/app_secret/a \ \ \ \ asap_accepted_issuers = { \"$APP_ID\" }" $PROSODY_FILE
+sed -i "/app_secret/a \ \ \ \ asap_accepted_audiences = { \"$APP_ID\", \"RocketChat\" }" $PROSODY_FILE
+sed -i "/app_secret/a \\\\" $PROSODY_FILE
+sed -i "s|--allow_empty_token =.*|allow_empty_token = false|" $PROSODY_FILE
+sed -i 's|--"token_verification"|"token_verification"|' $PROSODY_FILE
 
 #Request auth
 sed -i "s|#org.jitsi.jicofo.auth.URL=EXT_JWT:|org.jitsi.jicofo.auth.URL=EXT_JWT:|" $JICOFO_SIP
@@ -57,7 +62,7 @@ VirtualHost "recorder.$DOMAIN"
   modules_enabled = {
     "ping";
   }
-  authentication = "internal_plain"
+  authentication = "internal_hashed"
 
 REC-JIBRI
 
@@ -68,9 +73,7 @@ VirtualHost "guest.$DOMAIN"
     authentication = "token"
     allow_empty_token = true
     c2s_require_encryption = false
---    muc_lobby_whitelist = { "recorder.$DOMAIN", "auth.$DOMAIN" }
     speakerstats_component = "speakerstats.$DOMAIN"
---    conference_duration_component = "conferenceduration.$DOMAIN"
     app_id="$APP_ID";
     app_secret="$SECRET_APP";
 
@@ -81,8 +84,8 @@ VirtualHost "guest.$DOMAIN"
 P_SR
 
 echo -e "\nUse the following for your App (e.g. Rocket.Chat):\n"
-echo -e "\n$APP_ID" && \
+echo -e "\nAPP_ID: $APP_ID" && \
-echo -e "$SECRET_APP\n"
+echo -e "SECRET_APP: $SECRET_APP\n"
 
 echo -e "You can test JWT authentication with the following token:\n"
 pyjwt3 --key="$SECRET_APP" \

quick_jibri_installer.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Quick Jibri Installer - *buntu (LTS) based systems.
-# SwITNet Ltd © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GPLv3 or later.
 {
 echo "Started at $(date +'%Y-%m-%d %H:%M:%S')" >> qj-installer.log
@@ -42,12 +42,16 @@ fi
 }
 exit_ifinstalled jitsi-meet
 
-if [ $DIST = flidas ]; then
+rename_distro() {
-DIST="xenial"
+if [ "$DIST" = "$1" ]; then
-fi
+  DIST="$2"
-if [ $DIST = etiona ]; then
-DIST="bionic"
 fi
+}
+#Trisquel distro renaming
+rename_distro flidas xenial
+rename_distro etiona bionic
+rename_distro nabia  focal
+
 install_ifnot() {
 if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
     echo " $1 is installed, skipping..."
@@ -657,11 +661,11 @@ WAN_IP=$(dig +short myip.opendns.com @resolver1.opendns.com)
 
 ssl_wa() {
 if [ "$LE_SSL" = "yes" ]; then
-systemctl stop $1
+  systemctl stop $1
   letsencrypt certonly --standalone --renew-by-default --agree-tos --email $5 -d $6
   sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" $4
   sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" $4
-systemctl restart $1
+  systemctl restart $1
   #Add cron
   crontab -l | { cat; echo "@weekly certbot renew --${2} > $LE_RENEW_LOG 2>&1"; } | crontab -
   crontab -l

tools/fail2ban_ssh.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Fail2ban configuration
-# 2020 - SwITNet Ltd
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/jibri-conf-upgrade.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri conf updater
-# 2020 - SwITNet Ltd
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/jibri-resolution-enhancer.sh

@@ -0,0 +1,123 @@
+#!/bin/bash
+# Simple Jibri resolution enhancer
+# SwITNet Ltd © - 2021, https://switnet.net/
+# GNU GPLv3 or later.
+
+while getopts m: option
+do
+    case "${option}"
+    in
+        m) MODE=${OPTARG};;
+        \?) echo "Usage: sudo ./jibri-resolution-enhancer.sh [-m debug]" && exit;;
+    esac
+done
+
+#DEBUG
+if [ "$MODE" = "debug" ]; then
+  set -x
+fi
+
+#Check if user is root
+if ! [ $(id -u) = 0 ]; then
+   echo "You need to be root or have sudo privileges!"
+   exit 0
+fi
+
+# Make sure jibri is installed
+if [ "$(dpkg-query -W -f='${Status}' jibri 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+  echo "Good Jibri is installed on this server"
+else
+  echo "Jibri is not on this system, it is a requirement.
+Exiting..."
+  exit
+fi
+
+apt-get -y install apt-show-versions
+
+JIBRI_OPT="/opt/jitsi/jibri"
+JIBRI_ENH_PATH="/opt/jibri-res-enhancer"
+INSTALLED_JIBRI_VERSION="$(apt-show-versions jibri|awk '{print$2}')"
+
+#Check if already run
+if [ -f "$JIBRI_OPT/jibri-res_enh.jar" ] && \
+   [ -d "$JIBRI_ENH_PATH" ]; then
+  echo "Seems this tools have been run before..."
+  exit
+fi
+
+mkdir /tmp/jibri
+cd /tmp/jibri
+
+#Get md5sum for current jibri installed.
+apt-get download jibri=$INSTALLED_JIBRI_VERSION
+ar x jibri_*.deb
+tar xvf data.tar.xz
+UPSTREAM_DEB_JAR_SUM="$(md5sum 2>/dev/null /tmp/jibri/opt/jitsi/jibri/jibri.jar |awk '{print$1}')"
+
+if [ -z $UPSTREAM_DEB_JAR_SUM ]; then
+  echo "Not possible to continue, exiting..."
+  exit
+fi
+
+#Compile requisites
+apt-get -y install devscripts \
+                   git \
+                   maven \
+                   openjdk-8-jdk
+
+#Build repository
+git clone https://github.com/jitsi/jibri $JIBRI_ENH_PATH
+cd $JIBRI_ENH_PATH
+
+# Default values
+## videoEncodePreset - "veryfast" || h264ConstantRateFactor - 25
+# Recomemended values based on: https://trac.ffmpeg.org/wiki/Encode/H.264#crf
+## videoEncodePreset - "medium" || h264ConstantRateFactor - 15
+sed -i "/videoEncodePreset/s|String =.*|String = \"medium\",|"  src/main/kotlin/org/jitsi/jibri/capture/ffmpeg/FfmpegCapturer.kt
+sed -i "/h264ConstantRateFactor/s|Int =.*|Int = 15,|"  src/main/kotlin/org/jitsi/jibri/capture/ffmpeg/FfmpegCapturer.kt
+mvn package
+
+JIBRI_JAR="$(ls -Sh $JIBRI_ENH_PATH/target|awk '/dependencies/&&/.jar/{print}'|awk 'NR==1{print}')"
+cp $JIBRI_ENH_PATH/target/$JIBRI_JAR $JIBRI_ENH_PATH/target/jibri.jar
+
+# Backing up default binaries
+if [ "$UPSTREAM_DEB_JAR_SUM" = "$(md5sum 2>/dev/null $JIBRI_OPT/jibri.jar|awk '{print$1}')" ]; then
+  cp $JIBRI_OPT/jibri.jar $JIBRI_OPT/jibri-dpkg-package.jar
+fi
+
+# Migrate original to enhanced jibri
+cp $JIBRI_ENH_PATH/target/jibri.jar $JIBRI_OPT/jibri-res_enh.jar
+if [ -f $JIBRI_OPT/jibri-dpkg-package.jar ];then
+ cp $JIBRI_OPT/jibri-res_enh.jar $JIBRI_OPT/jibri.jar
+fi
+
+JIBRI_RES_ENH_HASH="$(md5sum 2>/dev/null $JIBRI_OPT/jibri-res_enh.jar|awk '{print$1}')"
+USED_JIBRI_HASH="$(md5sum 2>/dev/null $JIBRI_OPT/jibri.jar|awk '{print$1}')"
+
+if [ "$JIBRI_RES_ENH_HASH" = "$USED_JIBRI_HASH" ]; then
+  echo "Everything seems to have gone well."
+else 
+  echo "Something went wrong, restoring default package..."
+  if [ "$(md5sum 2>/dev/null $JIBRI_OPT/jibri-dpkg-package.jar|awk '{print$1}')" = "$UPSTREAM_DEB_JAR_SUM" ]; then
+    cp $JIBRI_OPT/jibri-dpkg-package.jar $JIBRI_OPT/jibri.jar
+    CLEAN="true"
+  else
+    if [ -f /tmp/jibri/opt/jitsi/jibri/jibri.jar ]; then
+      echo "Restoring from upstream package..."
+      cp /tmp/jibri/opt/jitsi/jibri/jibri.jar $JIBRI_OPT/jibri.jar
+      CLEAN="true"
+    else
+      echo "Wow, someone took the time to avoid restauration, please manually review your changes."
+      echo "Exiting..."
+      exit
+    fi
+  fi
+fi
+if [ "$CLEAN" = "true" ]; then
+  rm -r /tmp/jibri
+  rm -r $JIBRI_ENH_PATH
+  rm /opt/jitsi/jibri/jibri-res_enh.jar
+fi
+
+systemctl restart jibri
+echo "This will be a good time to test the enhanced resolution."

tools/start-over.sh

@@ -0,0 +1,128 @@
+#!/bin/bash
+#Start over
+# SwITNet Ltd © - 2021, https://switnet.net/
+# GPLv3 or later.
+
+while getopts m: option
+do
+    case "${option}"
+    in
+        m) MODE=${OPTARG};;
+        \?) echo "Usage: sudo ./start-over.sh [-m debug]" && exit;;
+    esac
+done
+
+#DEBUG
+if [ "$MODE" = "debug" ]; then
+  set -x
+fi
+
+#Check if user is root
+if ! [ $(id -u) = 0 ]; then
+   echo "You need to be root or have sudo privileges!"
+   exit 0
+fi
+
+wait_seconds() {
+secs=$(($1))
+while [ $secs -gt 0 ]; do
+   echo -ne "$secs\033[0K\r"
+   sleep 1
+   : $((secs--))
+done
+}
+remove_residuals() {
+  if [ -d $1 ]; then
+    rm -r $1
+  fi
+}
+purge_debconf() {
+  echo PURGE | debconf-communicate $1
+}
+remove_services() {
+  systemctl disable $1
+  systemctl stop $1
+}
+echo -e '
+########################################################################
+                Welcome to the Start Over cleaner script
+########################################################################
+                    by Software, IT & Networks Ltd
+\n'
+
+SYNC_USER="$(ls /home|awk '/jbsync/{print}')"
+
+echo "We are about to remove and clean all the jitsi-meet plaform bits and pieces...
+Please make sure you have backed up anything you don't want to loose."
+
+echo "
+# WARGNING #: This is only recommended if you want to start over a failed installation,
+or plain and simple remove jitsi from your system."
+
+while [[ "$CONTINUE_PURGE1" != "yes" && "$CONTINUE_PURGE1" != "no" ]]
+do
+read -p "> Do you want to continue?: (yes or no)"$'\n' -r CONTINUE_PURGE1
+if [ "$CONTINUE_PURGE1" = "no" ]; then
+    echo "  Good, see you next time..."
+    exit
+elif [ "$CONTINUE_PURGE1" = "yes" ]; then
+    echo ""
+fi
+done
+
+echo "Let me ask just one more time..."
+while [[ "$CONTINUE_PURGE2" != "yes" && "$CONTINUE_PURGE2" != "no" ]]
+do
+read -p "> Do you want to continue?: (yes or no)"$'\n' -r CONTINUE_PURGE2
+if [ "$CONTINUE_PURGE2" = "no" ]; then
+    echo "  Good, see you next time..."
+    exit
+elif [ "$CONTINUE_PURGE2" = "yes" ]; then
+    echo "No going back, lets start..."
+    wait_seconds 5
+fi
+done
+
+#Purging all jitsi meet packages
+apt-get -y purge jibri \
+                 jicofo \
+                 jigasi \
+                 jitsi-meet \
+                 jitsi-meet-web \
+                 jitsi-meet-web-config \
+                 jitsi-meet-prosody \
+                 jitsi-meet-turnserver \
+                 jitsi-videobridge2 \
+                 prosody
+
+#Services stop
+remove_services jibri*
+
+#Cleaning packages
+apt-get -y autoremove
+apt-get clean
+
+#Removing residual files
+remove_residuals /etc/jitsi
+remove_residuals /opt/jitsi
+remove_residuals /usr/share/jicofo
+remove_residuals /usr/share/jitsi-*
+
+#Purging debconf db
+purge_debconf jicofo
+purge_debconf jigasi
+purge_debconf jitsi-meet
+purge_debconf jitsi-meet-prosody
+purge_debconf jitsi-meet-turnserver
+purge_debconf jitsi-meet-web-config
+purge_debconf jitsi-videobridge2
+
+#Remove unused users
+if [ ! -z $SYNC_USER ]; then
+  deluser --remove-home $SYNC_USER
+fi
+if [ -d /home/jibri ]; then
+  deluser --remove-home  jibri
+fi
+
+echo "We are done..."

tools/test-jibri-env.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri Env tester
-# 2020 - SwITNet Ltd
+# SwITNet Ltd © - 2021, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option