add-jibri-node.sh

@@ -251,7 +251,7 @@ HWE_VIR_MOD=$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr) 2>/de
 if [ "$HWE_VIR_MOD" = "1" ]; then
     apt-get -y install \
     linux-image-generic-hwe-$(lsb_release -sr)
-    else
+else
     apt-get -y install \
     linux-image-generic \
     linux-modules-extra-$(uname -r)

etherpad.sh

@@ -42,7 +42,7 @@ cut -d "/" -f2
 install_ifnot() {
 if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
     echo " $1 is installed, skipping..."
-    else
+else
     echo -e "\n---- Installing $1 ----"
     apt-get -yq2 install $1
 fi

jra_nextcloud.sh

@@ -63,40 +63,39 @@ fi
 
 while [[ -z "$NC_DOMAIN" ]]
 do
-read -p "Please enter the domain to use for Nextcloud: " -r NC_DOMAIN
+    read -p "Please enter the domain to use for Nextcloud: " -r NC_DOMAIN
-if [ -z "$NC_DOMAIN" ];then
+    if [ -z "$NC_DOMAIN" ];then
         echo "-- This field is mandatory."
-elif [ "$NC_DOMAIN" = "$DOMAIN" ]; then
+    elif [ "$NC_DOMAIN" = "$DOMAIN" ]; then
         echo "-- You can not use the same domain for both, Jitsi Meet and JRA via Nextcloud."
-fi
+    fi
 done
 NC_NGINX_CONF="/etc/nginx/sites-available/$NC_DOMAIN.conf"
 while [[ -z "$NC_USER" ]]
 do
-read -p "Nextcloud user: " -r NC_USER
+    read -p "Nextcloud user: " -r NC_USER
-if [ -z "$NC_USER" ]; then
+    if [ -z "$NC_USER" ]; then
         echo "-- This field is mandatory."
-fi
+    fi
 done
 while [ -z "$NC_PASS" ]  || [ ${#NC_PASS} -lt 6 ]
 do
-read -p "Nextcloud user password: " -r NC_PASS
+    read -p "Nextcloud user password: " -r NC_PASS
-
+    if [ -z "$NC_PASS" ] || [ ${#NC_PASS} -lt 6 ]; then
-if [ -z "$NC_PASS" ] || [ ${#NC_PASS} -lt 6 ]; then
         echo -e "-- This field is mandatory. \nPlease make sure it's at least 6 caracters.\n"
-fi
+    fi
 done
 #Enable HSTS
 while [[ "$ENABLE_HSTS" != "yes" && "$ENABLE_HSTS" != "no" ]]
 do
-read -p "> Do you want to enable HSTS for this domain?: (yes or no)
+    read -p "> Do you want to enable HSTS for this domain?: (yes or no)
   Be aware this option apply mid-term effects on the domain, choose \"no\"
   in case you don't know what you are doing. More at https://hstspreload.org/"$'\n' -r ENABLE_HSTS
-if [ "$ENABLE_HSTS" = "no" ]; then
+    if [ "$ENABLE_HSTS" = "no" ]; then
         echo "-- HSTS won't be enabled."
-elif [ "$ENABLE_HSTS" = "yes" ]; then
+    elif [ "$ENABLE_HSTS" = "yes" ]; then
         echo "-- HSTS will be enabled."
-fi
+    fi
 done
 
 echo -e "\n# Check for jitsi-meet/jibri\n"
@@ -120,22 +119,22 @@ fi
 install_ifnot() {
 if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
     echo " $1 is installed, skipping..."
-    else
+else
     echo -e "\n---- Installing $1 ----"
     apt-get -yq2 install $1
 fi
 }
 add_php74() {
-	if [ "$PHP_REPO" = "php" ]; then
+if [ "$PHP_REPO" = "php" ]; then
     echo "PHP $PHPVER already installed"
     apt-get -q2 update
     apt-get -yq2 dist-upgrade
-	else
+else
     echo "# Adding Ondrej PHP $PHPVER PPA Repository"
     apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E5267A6C
     echo "deb [arch=amd64] http://ppa.launchpad.net/ondrej/php/ubuntu $DISTRO_RELEASE main" > /etc/apt/sources.list.d/php7x.list
     apt-get update -q2
-	fi
+fi
 }
 #Prevent root folder permission issues
 cp $PWD/files/jra-nc-app-ef.json /tmp
@@ -383,11 +382,11 @@ nginx -t
 systemctl restart nginx
 
 if [ "$ENABLE_HSTS" = "yes" ]; then
-sed -i "s|# add_header Strict-Transport-Security|add_header Strict-Transport-Security|g" $NC_NGINX_CONF
+    sed -i "s|# add_header Strict-Transport-Security|add_header Strict-Transport-Security|g" $NC_NGINX_CONF
 fi
 
-if [ "$DISTRO_RELEASE" != "xenial" ] && [ ! -z $PREAD_PROXY ]; then
+if [ "$DISTRO_RELEASE" != "xenial" ] && [ ! -z "$PREAD_PROXY" ]; then
-echo "
+    echo "
   Setting up Nextcloud domain on Jitsi Meet turn proxy
 "
     sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" $JITSI_MEET_PROXY

quick_jibri_installer.sh

@@ -272,7 +272,6 @@ if [ "$LE_SSL" = "yes" ]; then
       echo "Please try again."
     fi
   done
-
   #Simple DNS test
     if [ "$PUBLIC_IP" = "$(dig -4 +short $JITSI_DOMAIN)" ]; then
         echo "Server public IP  & DNS record for $JITSI_DOMAIN seems to match, continuing...
@@ -318,7 +317,7 @@ HWE_VIR_MOD=$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr) 2>/de
 if [ "$HWE_VIR_MOD" = "1" ]; then
     apt-get -y install \
     linux-image-generic-hwe-$(lsb_release -sr)
-    else
+else
     apt-get -y install \
     linux-image-generic \
     linux-modules-extra-$(uname -r)
@@ -351,7 +350,7 @@ echo "
 "
 if [ "$(dpkg-query -W -f='${Status}' nodejs 2>/dev/null | grep -c "ok")" == "1" ]; then
     echo "Nodejs is installed, skipping..."
-    else
+else
     curl -sL https://deb.nodesource.com/setup_12.x | sudo -E bash -
     apt-get install -yq2 nodejs
     echo "Installing nodejs esprima package..."
@@ -469,12 +468,12 @@ read -p "Leave empty to use the default one (English): "$'\n' L10N_ME
 #Drop unsecure TLS
 while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]]
 do
-read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)"$'\n' -r DROP_TLS1
+    read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)"$'\n' -r DROP_TLS1
-if [ "$DROP_TLS1" = "no" ]; then
+    if [ "$DROP_TLS1" = "no" ]; then
         echo "TLSv1.0/1.1 will remain."
-elif [ "$DROP_TLS1" = "yes" ]; then
+    elif [ "$DROP_TLS1" = "yes" ]; then
         echo "TLSv1.0/1.1 will be dropped"
-fi
+    fi
 done
 #Dropbox -- no longer requirement for localrecording
 #while [[ $ENABLE_DB != yes && $ENABLE_DB != no ]]
@@ -489,32 +488,32 @@ done
 #Brandless  Mode
 while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]]
 do
-read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)"$'\n' -r ENABLE_BLESSM
+    read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)"$'\n' -r ENABLE_BLESSM
-if [ "$ENABLE_BLESSM" = "no" ]; then
+    if [ "$ENABLE_BLESSM" = "no" ]; then
         echo "Brandless mode won't be set."
-elif [ "$ENABLE_BLESSM" = "yes" ]; then
+    elif [ "$ENABLE_BLESSM" = "yes" ]; then
         echo "Brandless mode will be set."
-fi
+    fi
 done
 #Welcome Page
 while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]]
 do
-read -p "> Do you want to disable the Welcome page: (yes or no)"$'\n' -r ENABLE_WELCP
+    read -p "> Do you want to disable the Welcome page: (yes or no)"$'\n' -r ENABLE_WELCP
-if [ "$ENABLE_WELCP" = "yes" ]; then
+    if [ "$ENABLE_WELCP" = "yes" ]; then
         echo "Welcome page will be disabled."
-elif [ "$ENABLE_WELCP" = "no" ]; then
+    elif [ "$ENABLE_WELCP" = "no" ]; then
         echo "Welcome page will be enabled."
-fi
+    fi
 done
 #Enable static avatar
 while [[ "$ENABLE_SA" != "yes" && "$ENABLE_SA" != "no" ]]
 do
-read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)"$'\n' -r ENABLE_SA
+    read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)"$'\n' -r ENABLE_SA
-if [ "$ENABLE_SA" = "no" ]; then
+    if [ "$ENABLE_SA" = "no" ]; then
         echo "Static avatar won't be enabled"
-elif [ "$ENABLE_SA" = "yes" ]; then
+    elif [ "$ENABLE_SA" = "yes" ]; then
         echo "Static avatar will be enabled"
-fi
+    fi
 done
 # #Enable local audio recording - disabling
 #while [[ "$ENABLE_LAR" != "yes" && "$ENABLE_LAR" != "no" ]]
@@ -568,13 +567,13 @@ done
 #Jibri Records Access (JRA) via Nextcloud
 while [[ "$ENABLE_NC_ACCESS" != "yes" && "$ENABLE_NC_ACCESS" != "no" ]]
 do
-read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
+    read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
 ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_NC_ACCESS
-if [ "$ENABLE_NC_ACCESS" = "no" ]; then
+    if [ "$ENABLE_NC_ACCESS" = "no" ]; then
     	echo -e "-- JRA via Nextcloud won't be enabled.\n"
-elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
+    elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
     	echo -e "-- JRA via Nextcloud will be enabled.\n"
-fi
+    fi
 done
 #Jigasi
 if [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "404" ]; then
@@ -584,7 +583,7 @@ if [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "404" ]; t
 elif [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "200" ]; then
     while [[ "$ENABLE_TRANSCRIPT" != "yes" && "$ENABLE_TRANSCRIPT" != "no" ]]
     do
-read -p "> Do you want to setup Jigasi Transcription: (yes or no)
+        read -p "> Do you want to setup Jigasi Transcription: (yes or no)
 ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_TRANSCRIPT
         if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
             echo -e "-- Jigasi Transcription won't be enabled.\n"
@@ -666,7 +665,6 @@ if [ "$LE_SSL" = "yes" ]; then
     elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "404" ]; then
         echo -e "\nCertbot PPA is not available for $(lsb_release -sc) just yet, it won't be installed...\n"
     fi
-
 else
     echo "SSL setup will be skipped."
 fi
@@ -766,16 +764,15 @@ sed -i "s|// liveStreamingEnabled: false,|liveStreamingEnabled: true,\\
 
 #LocalAudioRecording
 if [ "$ENABLE_LAR" = "yes" ]; then
-echo "# Enabling local recording (audio only)."
+    echo "# Enabling local recording (audio only)."
-LR_STR=$(grep -n "// Local Recording" $MEET_CONF | cut -d ":" -f1)
+    LR_STR=$(grep -n "// Local Recording" $MEET_CONF | cut -d ":" -f1)
-LR_END=$((LR_STR + 18))
+    LR_END=$((LR_STR + 18))
-sed -i "$LR_STR,$LR_END{s|// localRecording: {|localRecording: {|}" $MEET_CONF
+    sed -i "$LR_STR,$LR_END{s|// localRecording: {|localRecording: {|}" $MEET_CONF
-sed -i "$LR_STR,$LR_END{s|//     enabled: true,|enabled: true,|}" $MEET_CONF
+    sed -i "$LR_STR,$LR_END{s|//     enabled: true,|enabled: true,|}" $MEET_CONF
-sed -i "$LR_STR,$LR_END{s|//     format: 'flac'|format: 'flac'|}" $MEET_CONF
+    sed -i "$LR_STR,$LR_END{s|//     format: 'flac'|format: 'flac'|}" $MEET_CONF
-sed -i "$LR_STR,$LR_END{s|// }|}|}" $MEET_CONF
+    sed -i "$LR_STR,$LR_END{s|// }|}|}" $MEET_CONF
-
+    sed -i "s|'tileview'|'tileview', 'localrecording'|" $INT_CONF
-sed -i "s|'tileview'|'tileview', 'localrecording'|" $INT_CONF
+    sed -i "s|LOC_REC=.*|LOC_REC=\"on\"|" jitsi-updater.sh
-sed -i "s|LOC_REC=.*|LOC_REC=\"on\"|" jitsi-updater.sh
 fi
 
 #Setup main language
@@ -789,7 +786,7 @@ fi
 
 # Recording directory
 if [ ! -d $DIR_RECORD ]; then
-mkdir $DIR_RECORD
+    mkdir $DIR_RECORD
 fi
 chown -R jibri:jibri $DIR_RECORD
 
@@ -1001,7 +998,7 @@ elif [ "$DROP_TLS1" = "yes" ] && [ "$DIST" = "xenial" ];then
 elif [ "$DROP_TLS1" = "no" ];then
     echo "No TLSv1/1.1 dropping was done."
 else
-echo "No condition meet, please report to
+    echo "No condition meet, please report to
 https://github.com/switnet-ltd/quick-jibri-installer/issues "
 fi
 
@@ -1012,28 +1009,28 @@ sed -i "s|'videobackgroundblur', ||" $INT_CONF
 
 ###Setup secure rooms
 if [ "$ENABLE_SC" = "yes" ]; then
-SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" $PROSODY_FILE | head -n1 | cut -d ":" -f1)
+    SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" $PROSODY_FILE | head -n1 | cut -d ":" -f1)
-SRP_END=$((SRP_STR + 10))
+    SRP_END=$((SRP_STR + 10))
-sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_plain\"|}" $PROSODY_FILE
+    sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_plain\"|}" $PROSODY_FILE
-sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" $MEET_CONF
+    sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" $MEET_CONF
 
-#Secure room initial user
+    #Secure room initial user
-read -p "Set username for secure room moderator: "$'\n' -r SEC_ROOM_USER
+    read -p "Set username for secure room moderator: "$'\n' -r SEC_ROOM_USER
-read -p "Secure room moderator password: "$'\n' -r SEC_ROOM_PASS
+    read -p "Secure room moderator password: "$'\n' -r SEC_ROOM_PASS
-prosodyctl register $SEC_ROOM_USER $DOMAIN $SEC_ROOM_PASS
+    prosodyctl register $SEC_ROOM_USER $DOMAIN $SEC_ROOM_PASS
 
-echo -e "\nSecure rooms are being enabled..."
+    echo -e "\nSecure rooms are being enabled..."
-echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
+    echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
 or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered.
 If you have issues with the password refer to your sysadmin."
-sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" $JICOFO_SIP
+    sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" $JICOFO_SIP
-sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
+    sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
 fi
 
 ###JWT
 if [ "$ENABLE_JWT" = "yes" ]; then
-echo -e "\nJWT auth is being setup..."
+    echo -e "\nJWT auth is being setup..."
-bash $PWD/mode/jwt.sh
+    bash $PWD/mode/jwt.sh
 fi
 
 #Guest allow
@@ -1104,9 +1101,9 @@ sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" $MEET_CONF
 echo -e "\n# Checking $MEET_CONF file for errors\n"
 CHECKJS=$(esvalidate $MEET_CONF| cut -d ":" -f2)
 if [[ -z "$CHECKJS" ]]; then
-echo -e "\n# The $MEET_CONF configuration seems correct. =)\n"
+    echo -e "\n# The $MEET_CONF configuration seems correct. =)\n"
 else
-echo "
+    echo "
 Watch out!, there seems to be an issue on $MEET_CONF line:
 $CHECKJS
 Most of the times this is due upstream changes, please report to
@@ -1131,13 +1128,13 @@ fi
 enable_letsencrypt
 
 if [ "$ENABLE_SC" = "yes" ];then
-echo "Waiting prosody restart to continue configuration, 15s..."
+    echo "Waiting prosody restart to continue configuration, 15s..."
-wait_seconds 15
+    wait_seconds 15
 #Move mucs when using secure rooms - https://community.jitsi.org/t/27752/112
 #Change back - https://community.jitsi.org/t/64769/136
 #sed -i "s|        lobby_muc = \"lobby.|--        lobby_muc = \"lobby.|" $PROSODY_FILE
 #sed -i "s|        main_muc = \"conference.|--        main_muc = \"conference.|" $PROSODY_FILE
-sed -i "s|        muc_lobby_whitelist = { \"recorder.*|        muc_lobby_whitelist = { \"recorder.$DOMAIN\", \"auth.$DOMAIN\" }|" $PROSODY_FILE
+    sed -i "s|        muc_lobby_whitelist = { \"recorder.*|        muc_lobby_whitelist = { \"recorder.$DOMAIN\", \"auth.$DOMAIN\" }|" $PROSODY_FILE
 #EO_TF
 fi
 

tools/test-jibri-env.sh

@@ -154,8 +154,8 @@ if [ -z $SND_AL_MODULE ]; then
 please try rebooting.\nFor now wait 'til the end of the recommended kernel installation."
   echo "# Check and Install HWE kernel if possible..."
   if uname -r | grep -q aws;then
-  KNL_HWE="$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr)|head -n1|awk '{print$3}'|cut -d "." -f1-4)"
+  KNL_HWE="$(apt-cache madison linux-image-generic-hwe-$(lsb_release -sr)|awk 'NR__1{print$3}'|cut -d "." -f1-4)"
-  KNL_MENU="$(awk -F\' '/menuentry / {print $2}' /boot/grub/grub.cfg | grep generic | grep -v recovery | awk '{print$3,$4}'|grep $KNL_HWE)"
+  KNL_MENU="$(awk -F\' '/menuentry / {print $2}' /boot/grub/grub.cfg|awk '!/recovery/&&/generic/{print$3,$4}'|grep $KNL_HWE)"
       if [ ! -z "$KNL_MENU" ];then
       echo -e "\nSeems you are using an AWS kernel \xE2\x9C\x96 <== IMPORTANT! \nYou might consider modify your grub (/etc/default/grub) to use the following:" && \
       echo -e "\n > $KNL_MENU"