v7.3.0 add excalidraw support, and other fixes.

disable jigasi selector and checks

.github/FUNDING.yml

@@ -1,3 +0,0 @@
-# These are supported funding model platforms
-
-custom: ["https://www.paypal.me/switnet", switnet.net]

README.md

@@ -11,7 +11,7 @@ As for our current latest release, as we have integrated more and more features,
 Login into your clean server, clone git repository and run the installer,
 
 ```
-git clone https://github.com/switnet-ltd/quick-jibri-installer
+git clone https://forge.switnet.net/switnet/quick-jibri-installer
 cd quick-jibri-installer
 sudo bash quick_jibri_installer.sh
 ```
@@ -48,7 +48,7 @@ Check more details on our wiki.
 ## Requirements
 1. Clean VM/VPS/Server using a supported Ubuntu LTS
 2. Valid domain with DNS record, **mandatory** for SSL certs via Let's Encrypt.
-3. open ports for JMS interaction, [see wiki](https://github.com/switnet-ltd/quick-jibri-installer/wiki/Firewall).
+3. open ports for JMS interaction, [see wiki](https://forge.switnet.net/switnet/quick-jibri-installer/wiki/Firewall).
 4. Starting at 8 GB RAM / 4 Cores @ ~3.0GHz
     *  Adding resources as your audience or features you require, so your experience don't suffer from the lack of resources.
 5. Webcam
@@ -73,7 +73,7 @@ Feel free to use our `test-jibri-env.sh` tool to find some details on your curre
 * Enabled Session Recording via Jibri
   * Rename Jibri folder with name room + date.
   * Jibri node network.
-    * Automatic Jibri nodes network sync ([see more](https://github.com/switnet-ltd/quick-jibri-installer/wiki/Setup-and-Jibri-Nodes)).
+    * Automatic Jibri nodes network sync ([see more](https://forge.switnet.net/switnet/quick-jibri-installer/wiki/Setup-and-Jibri-Nodes)).
 * JRA (Jibri Recordings Access) via Nextcloud
 * Grafana Dashboard
 * Etherpad via docker install
@@ -115,8 +115,8 @@ Feel free to use our `test-jibri-env.sh` tool to find some details on your curre
 
 
 ## Documentation
-* Please check our [wiki](https://github.com/switnet-ltd/quick-jibri-installer/wiki) for further documentation.
+* Please check our [wiki](https://forge.switnet.net/switnet/quick-jibri-installer/wiki) for further documentation.
 
 Please note: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.
 
-SwITNet Ltd © - 2022, https://switnet.net/
+SwITNet Ltd © - 2023, https://switnet.net/

add-jibri-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Jibri Node Aggregator
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

add-jvb2-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JVB2 Node Aggregator
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

etherpad-docker.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Etherpad Installer for Jitsi Meet
-# SwITNet Ltd  © - 2020, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 #
 # GPLv3 or later.
 
@@ -115,7 +115,7 @@ elif [ -f "$WS_CONF" ]; then
     sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
 else
     echo "> No etherpad config done to server file, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 
 # Configure config.js
@@ -134,5 +134,5 @@ if nginx -t 2>/dev/null ; then
 else
     echo "Please check your configuration, something may be wrong."
     echo "Will not try to enable etherpad nginx configuration, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi

excalidraw-backend.sh

@@ -0,0 +1,193 @@
+#!/bin/bash
+# Excalidraw Jitsi Backend Installer
+#
+# Based on:
+# - https://community.jitsi.org/t/118883
+#
+# SwITNet Ltd © - 2023, https://switnet.net/
+# GPLv3 or later.
+
+# Reset
+Color_Off='\e[0m'       # Text Reset
+# Regular Colors
+Black='\e[0;30m'        # Black
+Red='\e[0;31m'          # Red
+Green='\e[0;32m'        # Green
+Yellow='\e[0;33m'       # Yellow
+Blue='\e[0;34m'         # Blue
+Purple='\e[0;35m'       # Purple
+Cyan='\e[0;36m'         # Cyan
+
+printwc() {
+    printf "%b$2%b" "$1" "${Color_Off}"
+}
+print_title() {
+printwc "${Blue}" "\n#--------------------------------------------------"
+printwc "${Blue}" "\n# $1"
+printwc "${Blue}" "\n#--------------------------------------------------\n"
+}
+
+while getopts m: option
+do
+	case "${option}"
+	in
+		m) MODE=${OPTARG};;
+		\?) echo "Usage: sudo bash ./$0 [-m debug]" && exit;;
+	esac
+done
+
+#DEBUG
+if [ "$MODE" = "debug" ]; then
+set -x
+fi
+
+if ! [ "$(id -u)" = 0 ]; then
+   echo "You need to be root or have sudo privileges!"
+   exit 0
+fi
+clear
+echo -e '\n
+########################################################################
+                  Excalidraw Jitsi Backend Installer
+########################################################################
+                    by Software, IT & Networks Ltd
+\n'
+
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
+WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
+PROSODY_FILE="/etc/prosody/conf.d/$DOMAIN.cfg.lua"
+MEET_CONF="/etc/jitsi/meet/$DOMAIN-config.js"
+WS_MATCH1='# ensure all static content can always be found first'
+PROS_MATCH1='"av_moderation";'
+PROS_MATCH2='breakout_rooms_muc = "breakout.'
+PROS_MATCH3='VirtualHost "recorder.'
+CONFIG_MATCH1='Settings for the GIPHY integration'
+EXCALIDRAW_HOME="/opt/excalidraw"
+EXCAL_MATCH1="prometheus.metrics(io"
+EXCAL_NEW_PORT="9091"
+EXCAL_PORT_FILE="$EXCALIDRAW_HOME/backend/src/index.ts"
+
+
+# Test for matches
+test_match() {
+if grep -q "$1" "$2" ; then
+    echo "$(basename "$2") - OK..."
+else
+    echo "$(basename "$2"), FAIL..."
+    echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
+    exit
+fi
+}
+# Make sure we can rely on the match strings.
+printf "Testing match strings on config files.\n"
+test_match "$WS_MATCH1" "$WS_CONF"
+test_match "$PROS_MATCH1" "$PROSODY_FILE"
+test_match "$PROS_MATCH2" "$PROSODY_FILE"
+test_match "$PROS_MATCH3" "$PROSODY_FILE"
+test_match "$PROS_MATCH3" "$PROSODY_FILE"
+test_match "$CONFIG_MATCH1" "$MEET_CONF"
+
+#--------------------------------------------------
+print_title "Setup excalidraw backend."
+#--------------------------------------------------
+adduser --home "$EXCALIDRAW_HOME" --disabled-password --gecos "" excalidraw
+git clone https://github.com/jitsi/excalidraw-backend "$EXCALIDRAW_HOME/backend"
+test_match "$EXCAL_MATCH1" "$EXCAL_PORT_FILE"
+
+chown -R excalidraw:excalidraw "$EXCALIDRAW_HOME"
+cd "$EXCALIDRAW_HOME/backend"
+sudo -u excalidraw cp .env.development .env.production
+
+# Use documented port to get some sort of standarization.
+if sed -n "/$EXCAL_MATCH1/,/});/p" "$EXCAL_PORT_FILE" |grep -q port: ; then
+    echo "> Update predefined port for metrics to $EXCAL_NEW_PORT\n"
+    sed -i "/$EXCAL_MATCH1/,/});/s|port:.*,|port: $EXCAL_NEW_PORT,|" "$EXCAL_PORT_FILE"
+else
+    echo "> Define new port from default to $EXCAL_NEW_PORT\n"
+    sed -i  "/$EXCAL_MATCH1/a \ \ \ \ port: $EXCAL_NEW_PORT," "$EXCAL_PORT_FILE"
+fi
+
+printf "\nInstalling npm backend.\n"
+sudo -u excalidraw npm install
+sudo -u excalidraw npm run build
+
+#--------------------------------------------------
+print_title "Setup system & jitsi config files."
+#--------------------------------------------------
+# Enable websocket on nginx
+sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ location = /socket.io/ {" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ proxy_pass http://127.0.0.1:3002/socket.io/?\$args;" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ proxy_http_version 1.1;" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header Upgrade \$http_upgrade;" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header Connection \"upgrade\";" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header Host \$http_host;" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ tcp_nodelay on;" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \ \ \ \ }" "$WS_CONF"
+sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
+
+if grep -rq room_metadata /etc/prosody/conf.d/ ;then
+    echo "> Prosody seems to be already configured."
+else
+    echo "> Setting up prosody for whiteboard..."
+    # Modules enabled
+    sed -i "/$PROS_MATCH1/a \ \ \ \ \ \ \ \ \"room_metadata\";" "$PROSODY_FILE"
+    # Define internal component
+    sed -i "/$PROS_MATCH2/a \ \ \ \ room_metadata_component = \"metadata.$DOMAIN\"" "$PROSODY_FILE"
+    # Register component
+    sed -i "/$PROS_MATCH3/i \\\n" "$PROSODY_FILE"
+    sed -i "/$PROS_MATCH3/i Component \"metadata.$DOMAIN\" \"room_metadata_component\"" "$PROSODY_FILE"
+    sed -i "/$PROS_MATCH3/i \ \ \ \ muc_component = \"conference.$DOMAIN\"" "$PROSODY_FILE"
+    sed -i "/$PROS_MATCH3/i \ \ \ \ breakout_rooms_component = \"breakout.$DOMAIN\"" "$PROSODY_FILE"
+    sed -i "/$PROS_MATCH3/i \\\n" "$PROSODY_FILE"
+fi
+
+printf "\n# Checking for whitebord setup at $(basename "$MEET_CONF").\n"
+if [ -z "$(sed -n '/whiteboard: {/,/},/p' "$MEET_CONF")" ]; then
+    echo "> No present configuration on current config.js file"
+    sed -i "/$CONFIG_MATCH1/i \\\n" "$MEET_CONF"
+    sed -i "/$CONFIG_MATCH1/i \ \ \ \ whiteboard: {" "$MEET_CONF"
+    sed -i "/$CONFIG_MATCH1/i \ \ \ \ \ \ \ \ enabled: true," "$MEET_CONF"
+    sed -i "/$CONFIG_MATCH1/i \ \ \ \ \ \ \ \ collabServerBaseUrl: 'https://$DOMAIN'" "$MEET_CONF"
+    sed -i "/$CONFIG_MATCH1/i \ \ \ \ }," "$MEET_CONF"
+    sed -i "/$CONFIG_MATCH1/i \\\n" "$MEET_CONF"
+else
+    echo "> Enabling configuration on current config.js file"
+    sed -i "/whiteboard: {/,/},/s|// ||" "$MEET_CONF"
+    sed -i "/collabServerBaseUrl:/s|'https://.*'|'https://$DOMAIN'|" "$MEET_CONF"
+fi
+
+if  sed -n '/toolbarButtons: \[/,/\],/p' "$MEET_CONF" | \
+    grep -v '//'| grep -q whiteboard ; then
+    echo "> Whiteboard toolbar already enabled."
+elif sed -n '/toolbarButtons: \[/,/\],/p' "$MEET_CONF" | \
+     grep -v '//'|grep -q toolbarButtons: ; then 
+    echo "> Enabling whiteboard toolbar."
+    sed -i "/toolbarButtons:/a \ \ \ \ \ \ \ 'whiteboard'," "$MEET_CONF"
+else
+    echo "> ToolbarButtons not customized, whiteboard should be enabled by default,"
+    echo "  otherwise, please report to: https://forge.switnet.net/switnet/quick-jibri-installer/issues"
+fi
+
+printf "\n# Add systemd service\n"
+cat << EOF > /etc/systemd/system/excalidraw.service
+[Unit]
+Description=Excalidraw backend
+After=network-online.target
+
+[Service]
+User=excalidraw
+Group=excalidraw
+WorkingDirectory=$EXCALIDRAW_HOME/backend
+ExecStart=npm start
+Restart=always
+RestartSec=5s
+
+[Install]
+WantedBy=multi-user.target
+EOF
+
+systemctl enable excalidraw.service
+systemctl start excalidraw.service
+
+printwc "${Green}" "\nExcalidraw setup complete!\n"

grafana.sh

@@ -8,7 +8,7 @@
 # by "mephisto"
 #
 # Igor Kerstges © - 2021
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 #
 # GPLv3 or later.
 
@@ -167,7 +167,7 @@ if [ -f "$WS_CONF" ]; then
     systemctl restart nginx
 else
     echo "No app configuration done to server file, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 
 echo "

jitsi-updater.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet recurring upgrader and customization keeper
 # for Debian/*buntu binaries.
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

jm-bm.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet brandless mode
 # for Debian/*buntu binaries.
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

jra_nextcloud.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JRA (Jibri Recordings Access) via Nextcloud
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option
@@ -25,7 +25,7 @@ exit_if_not_installed() {
 if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" != "1" ]; then
     echo " This instance doesn't have $1 installed, exiting..."
     echo " If you think this is an error, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues "
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues "
     exit
 fi
 }
@@ -51,7 +51,7 @@ PHP_FPM_DIR="/etc/php/$PHPVER/fpm"
 PHP_INI="$PHP_FPM_DIR/php.ini"
 PHP_CONF="/etc/php/$PHPVER/fpm/pool.d/www.conf"
 NC_NGINX_SSL_PORT="$(grep "listen 44" /etc/nginx/sites-available/"$DOMAIN".conf | awk '{print$2}')"
-[ -z $NC_NGINX_SSL_PORT ] && NC_NGINX_SSL_PORT="443"
+[ -z "$NC_NGINX_SSL_PORT" ] && NC_NGINX_SSL_PORT="443"
 NC_REPO="https://download.nextcloud.com/server/releases"
 NCVERSION="$(curl -s -m 900 $NC_REPO/ | sed --silent 's/.*href="nextcloud-\([^"]\+\).zip.asc".*/\1/p' | sort --version-sort | tail -1)"
 STABLEVERSION="nextcloud-$NCVERSION"
@@ -63,7 +63,6 @@ NC_DB_PASSWD="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 14 | head -n1)"
 DIR_RECORD="$(awk  -F '"' '/RECORDING/{print$2}'  /home/jibri/finalize_recording.sh|awk 'NR==1{print$1}')"
 REDIS_CONF="/etc/redis/redis.conf"
 JITSI_MEET_PROXY="/etc/nginx/modules-enabled/60-jitsi-meet.conf"
-
 [ -f "$JITSI_MEET_PROXY" ] && PREAD_PROXY=$(grep -nr "preread_server_name" "$JITSI_MEET_PROXY" | cut -d ":" -f1)
 PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
 ISO3166_CODE=TBD
@@ -79,7 +78,7 @@ mv "$TMP_GPG_REPO"/"$1".gpg /etc/apt/trusted.gpg.d/
 install_aval_package() {
 for i in $1
   do
-     if [ -z "$(apt-cache madison $i 2>/dev/null)" ]; then
+     if [ -z "$(apt-cache madison "$i" 2>/dev/null)" ]; then
      echo " > Package $i not available on repo."
      else
      echo " > Add package $i to the install list"
@@ -94,7 +93,7 @@ exit_ifinstalled() {
 if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
     echo " This instance already has $1 installed, exiting..."
     echo " If you think this is an error, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues "
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues "
     exit
 fi
 }
@@ -211,27 +210,26 @@ exit_ifinstalled postgresql-"$PSGVER"
 install_ifnot postgresql-"$PSGVER"
 
 # PHP 7.4 / 8.1
-
 add_php
 install_aval_package " \
             imagemagick \
-            php"$PHPVER"-fpm \
+            php$PHPVER-fpm \
-            php"$PHPVER"-bcmath \
+            php$PHPVER-bcmath \
-            php"$PHPVER"-bz2 \
+            php$PHPVER-bz2 \
-            php"$PHPVER"-curl \
+            php$PHPVER-curl \
-            php"$PHPVER"-gd \
+            php$PHPVER-gd \
-            php"$PHPVER"-gmp \
+            php$PHPVER-gmp \
-            php"$PHPVER"-imagick \
+            php$PHPVER-imagick \
-            php"$PHPVER"-intl \
+            php$PHPVER-intl \
-            php"$PHPVER"-json \
+            php$PHPVER-json \
-            php"$PHPVER"-ldap \
+            php$PHPVER-ldap \
-            php"$PHPVER"-mbstring \
+            php$PHPVER-mbstring \
-            php"$PHPVER"-pgsql \
+            php$PHPVER-pgsql \
-            php"$PHPVER"-redis \
+            php$PHPVER-redis \
-            php"$PHPVER"-soap \
+            php$PHPVER-soap \
-            php"$PHPVER"-xml \
+            php$PHPVER-xml \
-            php"$PHPVER"-xmlrpc \
+            php$PHPVER-xmlrpc \
-            php"$PHPVER"-zip \
+            php$PHPVER-zip \
             redis-server \
             unzip \
             "

mode/chp-mode.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Custom High Performance Jitsi conf
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option
@@ -87,7 +87,7 @@ Overview:
 echo "# Note: As for January 2021 Firefox can't handle correctly widescreen sizing
 # on lower resolution than HD (nHD & qHD), setting as incompatible for now.
 # (If you know this is no longer the case. Please report it to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues)
+https://forge.switnet.net/switnet/quick-jibri-installer/issues)
 "
 
 #Tools to consider
@@ -310,7 +310,7 @@ else
 echo -e "\n  Watch out!, there seems to be an issue on $MEET_CONF_HP line:
     $CHECKJS_MEET_CHP
   Most of the times this is due upstream changes, please report to
-  https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+  https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 fi
 CHECKJS_INT_CHP="$(esvalidate "$INT_CONF_JS_HP"| cut -d ":" -f2)"
 if [ -z "$CHECKJS_INT_CHP" ]; then
@@ -319,7 +319,7 @@ else
 echo -e "\n  Watch out!, there seems to be an issue on $INT_CONF_JS_HP line:
     $CHECKJS_INT_CHP
   Most of the times this is due upstream changes, please report to
-  https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+  https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 fi
 
 sed -i "s|$MEET_CONF|$MEET_CONF_HP|g" "$WS_CONF"

mode/grid/selenium-grid-docker.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Custom Selenium Grid-Node fro Jitsi Meet
 # Pandian © - https://community.jitsi.org/u/Pandian
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

mode/jms-stu.sh

@@ -2,7 +2,7 @@
 # System-tune-up to remove system software restrictions on a huge load of connections.
 # Be aware that hardware/infrastructure resources are the most common limiters.
 #
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

mode/jwt.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JWT Mode Setup
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

quick_jibri_installer.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Quick Jibri Installer - *buntu (LTS) based systems.
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 {
 echo "Started at $(date +'%Y-%m-%d %H:%M:%S')" >> qj-installer.log
@@ -51,7 +51,7 @@ if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")"
 This instance already has $1 installed, exiting...
 Please try again on a clean system.
  If you think this is an error, please report to:
-  -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+  -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
     exit
 fi
 }
@@ -62,10 +62,9 @@ if [ "$DIST" = "$1" ]; then
   DIST="$2"
 fi
 }
-#Trisquel distro renaming
+#Trisquel distro upstream referencing.
-rename_distro flidas xenial
-rename_distro etiona bionic
 rename_distro nabia  focal
+rename_distro aramo  jammy
 
 install_ifnot() {
 if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
@@ -143,8 +142,17 @@ printwc "${Blue}" "\n#--------------------------------------------------"
 printwc "${Blue}" "\n# $1"
 printwc "${Blue}" "\n#--------------------------------------------------\n"
 }
+test_match() {
+if grep -q "$1" "$2" ; then
+    echo "$(basename "$2") - OK..."
+else
+    echo "$(basename "$2"), FAIL..."
+    echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
+    exit
+fi
+}
 clear
-printf '
+printwc "${Green}" '
 ########################################################################
                     Welcome to Jitsi/Jibri Installer
 ########################################################################
@@ -153,13 +161,15 @@ printf '
 Featuring:
 - Jibri Recording and YouTube Streaming
 - Jibri Recordings Access via Nextcloud
-- Jigasi Transcription (Advanced)
+- Grafana Statistics
+- Etherpad
+- Whiteboard
 - Customized brandless mode
-- Recurring changes updater
+- Recurring updater
 
 Learn more about these at,
-Main repository: https://github.com/switnet-ltd/quick-jibri-installer
+Main repository: https://forge.switnet.net/switnet/quick-jibri-installer
-Wiki and documentation: https://github.com/switnet-ltd/quick-jibri-installer/wiki\n'
+Wiki and documentation: https://forge.switnet.net/switnet/quick-jibri-installer/wiki\n\n'
 
 read -n 1 -s -r -p "Press any key to continue..."$'\n'
 
@@ -238,11 +248,13 @@ echo 'This server will likely have issues due the lack of resources.
 If you plan to enable other components such as,
 
  - JRA via Nextcloud
- - Jigasi Transcriber
+ - Grafana
- - Additional Jibri Nodes
+ - Etherpad
- - others.
+ - Whiteboards
+ - Connect additional Jibri Nodes
+ - Others
 
->>> We higly recommend to increase resources of this server. <<<
+>>> We highly recommend to increase resources of this server. <<<
 
 For now we advice to disable the Jibri service locally and add an external
 Jibri node once this installation has finished, using our script:
@@ -364,7 +376,7 @@ apt-get -y install \
                 certbot
     if [ "$(dpkg-query -W -f='${Status}' ufw 2>/dev/null | grep -c "ok installed")" == "1"  ]; then
         echo "# Disable pre-installed ufw, more on firewall see:
-    > https://github.com/switnet-ltd/quick-jibri-installer/wiki/Firewall"
+    > https://forge.switnet.net/switnet/quick-jibri-installer/wiki/Firewall"
         ufw disable
     fi
 fi
@@ -498,12 +510,19 @@ LE_RENEW_LOG="/var/log/letsencrypt/renew.log"
 MOD_LISTU="https://prosody.im/files/mod_listusers.lua"
 MOD_LIST_FILE="/usr/lib/prosody/modules/mod_listusers.lua"
 ENABLE_SA="yes"
-GC_SDK_REL_FILE="http://packages.cloud.google.com/apt/dists/cloud-sdk-$(lsb_release -sc)/Release"
 MJS_RAND_TAIL="$(tr -dc "a-zA-Z0-9" < /dev/urandom | fold -w 4 | head -n1)"
 MJS_USER="jbsync_$MJS_RAND_TAIL"
 MJS_USER_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 32 | head -n1)"
 FQDN_HOST="fqdn"
 JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf"
+WS_MATCH1="# ensure all static content can always be found first"
+MEET_MATCH1="disable simulcast support."
+#GC_SDK_REL_FILE="http://packages.cloud.google.com/apt/dists/cloud-sdk-$(lsb_release -sc)/Release"
+
+# Make sure we can rely on the match strings.
+printf "> Testing match strings on config files.\n"
+test_match "$WS_MATCH1" "$WS_CONF"
+test_match "$MEET_MATCH1" "$MEET_CONF"
 
 # Rename hostname for jitsi server
 while [ "$FQDN_HOST" != "yes" ] && [ "$FQDN_HOST" != "no" ] && [ -n "$FQDN_HOST" ]
@@ -648,7 +667,7 @@ fi
 while [ "$ENABLE_NC_ACCESS" != "yes" ] && [ "$ENABLE_NC_ACCESS" != "no" ]
 do
     read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS
+( Please check requirements at: https://forge.switnet.net/switnet/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS
     if [ "$ENABLE_NC_ACCESS" = "no" ]; then
         printf " - JRA via Nextcloud won't be enabled.\n\n"
     elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
@@ -656,31 +675,31 @@ do
     fi
 done
 sleep .1
-#Jigasi
+##Jigasi
-if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then
+#if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then
-    printf "> Sorry Google SDK doesn't have support yet for %s,
+    #printf "> Sorry Google SDK doesn't have support yet for %s,
-    thus, Jigasi Transcript can't be enable.\n\n" "$(lsb_release -sd)"
+    #thus, Jigasi Transcript can't be enable.\n\n" "$(lsb_release -sd)"
-elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then
+#elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then
-    while [ "$ENABLE_TRANSCRIPT" != "yes" ] && [ "$ENABLE_TRANSCRIPT" != "no" ]
+    #while [ "$ENABLE_TRANSCRIPT" != "yes" ] && [ "$ENABLE_TRANSCRIPT" != "no" ]
-    do
+    #do
-        read -p "> Do you want to setup Jigasi Transcription: (yes or no)
+        #read -p "> Do you want to setup Jigasi Transcription: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
+#( Please check requirements at: https://forge.switnet.net/switnet/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
-        if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
+        #if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
-            printf " - Jigasi Transcription won't be enabled.\n\n"
+            #printf " - Jigasi Transcription won't be enabled.\n\n"
-        elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
+        #elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
-            printf " - Jigasi Transcription will be enabled.\n\n"
+            #printf " - Jigasi Transcription will be enabled.\n\n"
-        fi
+        #fi
-    done
+    #done
-else
+#else
-    echo "No valid option for Jigasi. Please report this to
+    #echo "No valid option for Jigasi. Please report this to
-https://github.com/switnet-ltd/quick-jibri-installer/issues"
+#https://forge.switnet.net/switnet/quick-jibri-installer/issues"
-fi
+#fi
 sleep .1
 #Grafana
 while [ "$ENABLE_GRAFANA_DSH" != "yes" ] && [ "$ENABLE_GRAFANA_DSH" != "no" ]
 do
 read -p "> Do you want to setup Grafana Dashboard: (yes or no)
-( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH
+( Please check requirements at: https://forge.switnet.net/switnet/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH
 if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then
     printf " - Grafana Dashboard won't be enabled.\n\n"
 elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
@@ -693,9 +712,20 @@ while [ "$ENABLE_DOCKERPAD" != "yes" ] && [ "$ENABLE_DOCKERPAD" != "no" ]
 do
 read -p "> Do you want to setup Docker Etherpad: (yes or no)$NL" -r ENABLE_DOCKERPAD
 if [ "$ENABLE_DOCKERPAD" = "no" ]; then
-    printf " - Docker Etherpad won't be enabled.\n"
+    printf " - Docker Etherpad won't be enabled.\n\n"
 elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then
-    printf " - Docker Etherpad will be enabled.\n"
+    printf " - Docker Etherpad will be enabled.\n\n"
+fi
+done
+sleep .1
+#Excalidraw Whiteboard
+while [ "$ENABLE_WHITEBOARD" != "yes" ] && [ "$ENABLE_WHITEBOARD" != "no" ]
+do
+read -p "> Do you want to setup Excalidraw Whiteboard backend: (yes or no)$NL" -r ENABLE_WHITEBOARD
+if [ "$ENABLE_WHITEBOARD" = "no" ]; then
+    printf " - Excalidraw Whiteboard won't be enabled.\n\n"
+elif [ "$ENABLE_WHITEBOARD" = "yes" ]; then
+    printf " - Excalidraw Whiteboard will be enabled.\n\n"
 fi
 done
 sleep .1
@@ -712,7 +742,7 @@ INT_CONF_ETC="/etc/jitsi/meet/$DOMAIN-interface_config.js"
 ssl_wa() {
 if [ "$LE_SSL" = "yes" ]; then
   systemctl stop "$1"
-  certbot certonly --standalone --renew-by-default --agree-tos --email "$5" -d "$6"
+  certbot certonly --standalone --renew-by-default --agree-tos --email "$5" -d "$6" --non-interactive
   sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" "$4"
   sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" "$4"
   systemctl restart "$1"
@@ -746,7 +776,7 @@ restart_services() {
 }
 
 # Configure Jvb2
-sed -i "/shard.HOSTNAME/s|localhost|$DOMAIN|" /etc/jitsi/videobridge/sip-communicator.properties
+sed -i "/shard.HOSTNAME/s|localhost|$DOMAIN|" "$JVB2_SIP"
 
 # Configure Jibri
 if [ "$ENABLE_SC" = "yes" ]; then
@@ -754,9 +784,11 @@ if [ "$ENABLE_SC" = "yes" ]; then
   printf "\n-> Adding external module to list prosody users...\n"
   curl -s "$MOD_LISTU" > "$MOD_LIST_FILE"
 
-  printf "Now you can check registered users with:\nprosodyctl mod_listusers\n"
+  printf "Now you can check registered users with:"
+  printf " \n  prosodyctl mod_listusers\n"
     else
-  printf "Prosody support for listing users seems to be enabled. \ncheck with: prosodyctl mod_listusers\n"
+  printf "Prosody support for listing users seems to be enabled.check with:"
+  printf " \n  prosodyctl mod_listusers\n"
   fi
 
 fi
@@ -1039,15 +1071,15 @@ sed -i "s|MJS_USER_PASS=.*|MJS_USER_PASS=\"$MJS_USER_PASS\"|" add-jvb2-node.sh
 
 #Tune webserver for Jitsi App control
 if [ -f "$WS_CONF" ]; then
-    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location = \/external_api.min.js {" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ location = \/external_api.min.js {" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ }" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
     systemctl reload nginx
 else
     echo "No app configuration done to server file, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 #Static avatar
 if [ "$ENABLE_SA" = "yes" ] && [ -f "$WS_CONF" ]; then
@@ -1067,7 +1099,7 @@ elif [ "$DROP_TLS1" = "no" ];then
     printf "\nNo TLSv1/1.1 dropping was done.\n\n"
 else
     echo "No condition meet, please report to
-https://github.com/switnet-ltd/quick-jibri-installer/issues "
+https://forge.switnet.net/switnet/quick-jibri-installer/issues "
 fi
 sleep .1
 #================== Setup prosody conf file =================
@@ -1146,24 +1178,24 @@ fi
 sed -i "s|// prejoinPageEnabled:.*|prejoinPageEnabled: true,|" "$MEET_CONF"
 
 #Set HD resolution and widescreen format
-sed -i "/Enable \/ disable simulcast support/i \/\/ Start QJI - Set resolution and widescreen format" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \/\/ Start QJI - Set resolution and widescreen format" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ resolution: 720," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ resolution: 720," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ constraints: {" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ constraints: {" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ aspectRatio: 16 \/ 9," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ aspectRatio: 16 \/ 9," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ video: {" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ video: {" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ height: {" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ height: {" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 720," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 720," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 720," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 720," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 180" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 180" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ }," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ width: {" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ width: {" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 1280," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ ideal: 1280," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 1280," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ max: 1280," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 320" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ \ min: 320" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ \ \ \ \ }" "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \ \ \ \ \ }," "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \ \ \ \ \ }," "$MEET_CONF"
-sed -i "/Enable \/ disable simulcast support/i \/\/ End QJI" "$MEET_CONF"
+sed -i "/$MEET_MATCH1/i \/\/ End QJI" "$MEET_CONF"
 
 #Check config file
 printf "\n# Checking %s file for errors\n" "$MEET_CONF"
@@ -1174,7 +1206,7 @@ else
     echo -e "\nWatch out!, there seems to be an issue on $MEET_CONF line:
 $CHECKJS
 Most of the times this is due upstream changes, please report to
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 fi
 
 #Enable jibri services
@@ -1227,7 +1259,7 @@ if [ -f "$WS_CONF" ]; then
     systemctl reload nginx
 else
     echo "No interface_config.js configuration done to server file, please report to:
-    -> https://github.com/switnet-ltd/quick-jibri-installer/issues"
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 #JRA via Nextcloud
 if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
@@ -1260,6 +1292,16 @@ if [ "$ENABLE_DOCKERPAD" = "yes" ]; then
     fi
 fi
 sleep .1
+#Excalidraw Whiteboard
+if [ "$ENABLE_WHITEBOARD" = "yes" ]; then
+    printf "\nExcalidraw Whiteboard will be enabled."
+    if [ "$MODE" = "debug" ]; then
+        bash "$PWD"/excalidraw-backend.sh -m debug
+    else
+        bash "$PWD"/excalidraw-backend.sh
+    fi
+fi
+sleep .1
 #Prevent JMS conecction issue
 if [ -z "$(awk "/127.0.0.1/&&/$DOMAIN/{print\$1}" /etc/hosts)" ];then
     sed -i "/127.0.0.1/a \\

tools/aws-grub-setup.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Automated AWS generic kernel setup for jibri.
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

tools/fail2ban_ssh.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Fail2ban configuration
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/jibri-conf-upgrade.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri conf updater
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option
@@ -77,18 +77,18 @@ if [ -f "$CONF_JSON"_disabled ] && \
    [ -f "$JIBRI_CONF" ] && \
    [ -f "$JIBRI_CONF"-dpkg-file ]; then
     echo -e "\n> This jibri config has been upgraded already, we'll exit...\n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
     exit
 elif [ ! -f "$CONF_JSON" ] && \
    [ -f "$JIBRI_CONF" ] && \
    [ -f "$JIBRI_CONF"-dpkg-file ]; then
     echo -e "\n> This jibri seems to be running the latest configuration already, we'll exit...\n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
     exit
 elif [ -f "$CONF_JSON" ] && \
    [ -f "$JIBRI_CONF" ]; then
     echo -e "\n> This jibri config seems to be candidate for upgrading, we'll continue...\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 fi
 
 #Read missing variables

tools/jibri-resolution-enhancer.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri resolution enhancer
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/start-over.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 #Start over
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

tools/test-jibri-env.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri Env tester
-# SwITNet Ltd © - 2022, https://switnet.net/
+# SwITNet Ltd © - 2023, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option
@@ -191,18 +191,18 @@ if [ -f "${CONF_JSON}"_disabled ] && \
    [ -f "$JIBRI_CONF" ] && \
    [ -f "$JIBRI_CONF"-dpkg-file ]; then
     echo -e "\n> This jibri config has been upgraded already. \xE2\x9C\x94 \n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 T6=1
 elif [ ! -f "$CONF_JSON" ] && \
      [ -f "$JIBRI_CONF" ] && \
      [ -f "${JIBRI_CONF}"-dpkg-file ]; then
     echo -e "\n> This jibri seems to be running the latest configuration already. \xE2\x9C\x94 \n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 T6=1
 elif [ -f "${CONF_JSON}" ] && \
      [ -f "$JIBRI_CONF" ]; then
     echo -e "\n> This jibri config seems to be candidate for upgrading. \xE2\x9C\x96 \nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 T6=0
 fi
 
@@ -210,11 +210,11 @@ fi
 echo -e "\n#6.1 -- Check for specific Chrome flag --\n"
 if [ "$(grep -c "ignore-certificate-errors"  $JIBRI_CONF)" != 0 ]; then
     echo -e "\n> Seems you have the \"--ignore-certificate-errors\" flag required for Chrome v88 and later. \xE2\x9C\x94 \n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 T6_1="0.1"
 else
-echo -e "\n> The jibri config may be missing the required chrome flags. \xE2\x9C\x96 \nPlease check:\n https://github.com/switnet-ltd/quick-jibri-installer/blob/master/quick_jibri_installer.sh#L820 \n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
+echo -e "\n> The jibri config may be missing the required chrome flags. \xE2\x9C\x96 \nPlease check:\n https://forge.switnet.net/switnet/quick-jibri-installer/src/branch/master/quick_jibri_installer.sh#L870 \n\nIf you think there maybe an error on checking you current jibri configuration.\nPlease report this to \
-https://github.com/switnet-ltd/quick-jibri-installer/issues\n"
+https://forge.switnet.net/switnet/quick-jibri-installer/issues\n"
 T6_1=0
 fi