Merge pull request 'README.md: update Jigasi mention now using Vosk.' (#117) from Ark74/quick-jibri-installer:upd_readme_jigasi into master

Reviewed-on: #117

README.md

@@ -56,9 +56,8 @@ Check more details on our wiki.
 ### Jibri Recodings Access via Nextcloud
 * Valid domain with DNS record for Nextcloud SSL.
  
-### Jigasi Transcript (stalled)
+### Jigasi Transcript
-* SIP account
+* Enough disk space to run Vosk backend via docker container.
-* Google Cloud Account with Billing setup.
 
 
 
@@ -79,7 +78,7 @@ Feel free to use our `test-jibri-env.sh` tool to find some details on your curre
 * Etherpad via docker install
 * Authentication
   1. Local
-  2. JWT
+  2. JWT ([#87](https://forge.switnet.net/switnet/quick-jibri-installer/issues/87))
   3. None
 * Lobby Rooms
 * Conference Duration
@@ -90,7 +89,7 @@ Feel free to use our `test-jibri-env.sh` tool to find some details on your curre
 * Enabled Jitsi Electron app detection server side.
 * Standalone SSL Certbot/LE implementation
 * Improved recurring updater
-* Jigasi Transcript - Speech to Text powered by Google API (stalled)
+* Jigasi Transcript - vía Vosk speech recognition toolkit.
 
 ## Tools
 * Jibri Environment Tester
@@ -119,4 +118,4 @@ Feel free to use our `test-jibri-env.sh` tool to find some details on your curre
 
 Please note: This program is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY.
 
-SwITNet Ltd © - 2023, https://switnet.net/
+SwITNet Ltd © - 2024, https://switnet.net/

add-jibri-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Jibri Node Aggregator
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

add-jvb2-node.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JVB2 Node Aggregator
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 ### 0_LAST EDITION TIME STAMP ###

etherpad-docker.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Etherpad Installer for Jitsi Meet
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 #
 # GPLv3 or later.
 
@@ -30,7 +30,7 @@ echo '
 ########################################################################
                     by Software, IT & Networks Ltd
 '
-
+FORGE_REPO="https://forge.switnet.net/switnet/quick-jibri-installer"
 check_apt_policy() {
 apt-cache policy 2>/dev/null| awk "/$1/{print \$3}" | awk -F '/' 'NR==1{print$2}'
 }
@@ -42,6 +42,16 @@ if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")"
         apt-get -yq2 install "$1"
 fi
 }
+# Test for matches
+test_match() {
+if grep -q "$1" "$2" ; then
+    echo "$(basename "$2") - OK..."
+else
+    echo "$(basename "$2"), FAIL..."
+    echo "Please report this to $FORGE_REPO"
+    exit
+fi
+}
 DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 MEET_CONF="/etc/jitsi/meet/$DOMAIN-config.js"
 WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
@@ -50,12 +60,14 @@ ETHERPAD_DB_USER="dockerpad"
 ETHERPAD_DB_NAME="etherpad"
 ETHERPAD_DB_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)"
 DOCKER_CE_REPO="$(check_apt_policy docker)"
+WS_CONF_MATCH1="# ensure all static content can always be found first"
 
 echo "Add Docker repo"
 if [ "$DOCKER_CE_REPO" = "stable" ]; then
     echo "Docker repository already installed"
 else
-    echo "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" > /etc/apt/sources.list.d/docker-ce.list
+    echo "deb [arch=amd64] https://download.docker.com/linux/ubuntu $(lsb_release -cs) stable" > \
+        /etc/apt/sources.list.d/docker-ce.list
     wget -qO - https://download.docker.com/linux/ubuntu/gpg | \
     gpg --dearmor | tee /etc/apt/trusted.gpg.d/docker-gpg-key.gpg  >/dev/null
     apt -q2 update
@@ -63,6 +75,9 @@ fi
 
 read -p "Set your etherpad docker admin password: " -r ETHERPAD_ADMIN_PASS
 
+# Make sure we can rely on the match strings.
+printf "> Testing match strings on config files.\n"
+test_match "$WS_MATCH1" "$WS_CONF"
 
 # Install required packages
 install_ifnot docker-ce
@@ -105,14 +120,18 @@ if [ "$(grep -c etherpad "$WS_CONF")" != 0 ]; then
     echo "> Webserver seems configured, skipping..."
 elif [ -f "$WS_CONF" ]; then
     echo "> Setting up webserver configuration file..."
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ #Etherpad block" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ #Etherpad block" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \^\~\ \/etherpad\/ {" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ location \^\~\ \/etherpad\/ {" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:9001\/;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_http_version 1.1;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header X-Forwarded-For \$remote_addr;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header Upgrade \$http_upgrade;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_buffering off;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header Connection \$connection_upgrade;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_set_header       Host \$host;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header X-Forwarded-For \$remote_addr;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_buffering off;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_redirect off;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_set_header       Host \$host;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:9001\/;" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/$WS_CONF_MATCH1/i \\\n" "$WS_CONF"
 else
     echo "> No etherpad config done to server file, please report to:
     -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
@@ -123,7 +142,7 @@ if [ "$(grep -c "etherpad_base" "$WS_CONF")" != 0 ]; then
     echo -e "> $MEET_CONF seems configured, skipping...\n"
 else
     echo -e "> Setting etherpad domain at $MEET_CONF...\n"
-    sed -i "/ openSharedDocumentOnJoin:/a\ \ \ \ etherpad_base: \'https://$DOMAIN/etherpad/p/\'," "$MEET_CONF"
+    sed -i "s|// etherpad_base: .*|etherpad_base: \'https://$DOMAIN/etherpad/p/\',|" "$MEET_CONF"
 fi
 
 echo "> Checking nginx configuration..."

excalidraw-backend.sh

@@ -4,7 +4,7 @@
 # Based on:
 # - https://community.jitsi.org/t/118883
 #
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 # Reset
@@ -26,6 +26,31 @@ printwc "${Blue}" "\n#--------------------------------------------------"
 printwc "${Blue}" "\n# $1"
 printwc "${Blue}" "\n#--------------------------------------------------\n"
 }
+restart_jibri() {
+if [ "$(dpkg-query -W -f='${Status}' "jibri" 2>/dev/null | grep -c "ok installed")" == "1" ]
+then
+    systemctl restart jibri
+    systemctl restart jibri-icewm
+    systemctl restart jibri-xorg
+else
+    echo "Jibri service not installed"
+fi
+}
+restart_services() {
+    systemctl restart jitsi-videobridge2
+    systemctl restart jicofo
+    restart_jibri
+    systemctl restart prosody
+}
+test_match() {
+if grep -q "$1" "$2" ; then
+    echo "$(basename "$2") - OK..."
+else
+    echo "$(basename "$2"), FAIL..."
+    echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
+    exit
+fi
+}
 
 while getopts m: option
 do
@@ -61,23 +86,12 @@ WS_MATCH1='# ensure all static content can always be found first'
 PROS_MATCH1='"av_moderation";'
 PROS_MATCH2='breakout_rooms_muc = "breakout.'
 PROS_MATCH3='VirtualHost "recorder.'
-CONFIG_MATCH1='Settings for the GIPHY integration'
+CONFIG_MATCH1='List of undocumented settings used in jitsi-meet'
 EXCALIDRAW_HOME="/opt/excalidraw"
 EXCAL_MATCH1="prometheus.metrics(io"
 EXCAL_NEW_PORT="9091"
 EXCAL_PORT_FILE="$EXCALIDRAW_HOME/backend/src/index.ts"
 
-
-# Test for matches
-test_match() {
-if grep -q "$1" "$2" ; then
-    echo "$(basename "$2") - OK..."
-else
-    echo "$(basename "$2"), FAIL..."
-    echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
-    exit
-fi
-}
 # Make sure we can rely on the match strings.
 printf "Testing match strings on config files.\n"
 test_match "$WS_MATCH1" "$WS_CONF"
@@ -100,14 +114,14 @@ sudo -u excalidraw cp .env.development .env.production
 
 # Use documented port to get some sort of standarization.
 if sed -n "/$EXCAL_MATCH1/,/});/p" "$EXCAL_PORT_FILE" |grep -q port: ; then
-    echo "> Update predefined port for metrics to $EXCAL_NEW_PORT\n"
+    echo -e "> Update predefined port for metrics to $EXCAL_NEW_PORT\n"
     sed -i "/$EXCAL_MATCH1/,/});/s|port:.*,|port: $EXCAL_NEW_PORT,|" "$EXCAL_PORT_FILE"
 else
-    echo "> Define new port from default to $EXCAL_NEW_PORT\n"
+    echo -e "> Define new port from default to $EXCAL_NEW_PORT\n"
     sed -i  "/$EXCAL_MATCH1/a \ \ \ \ port: $EXCAL_NEW_PORT," "$EXCAL_PORT_FILE"
 fi
 
-printf "\nInstalling npm backend.\n"
+printf "Installing npm backend.\n"
 sudo -u excalidraw npm install
 sudo -u excalidraw npm run build
 
@@ -142,7 +156,7 @@ else
     sed -i "/$PROS_MATCH3/i \\\n" "$PROSODY_FILE"
 fi
 
-printf "\n# Checking for whitebord setup at $(basename "$MEET_CONF").\n"
+printf "\n# Checking for whitebord setup at %s.\n" "$(basename "$MEET_CONF")"
 if [ -z "$(sed -n '/whiteboard: {/,/},/p' "$MEET_CONF")" ]; then
     echo "> No present configuration on current config.js file"
     sed -i "/$CONFIG_MATCH1/i \\\n" "$MEET_CONF"
@@ -191,3 +205,4 @@ systemctl enable excalidraw.service
 systemctl start excalidraw.service
 
 printwc "${Green}" "\nExcalidraw setup complete!\n"
+restart_services

files/jibri.conf

@@ -0,0 +1,109 @@
+// XMPP environment config.
+jibri {
+    streaming {
+        // A list of regex patterns for allowed RTMP URLs.  The RTMP URL used
+        // when starting a stream must match at least one of the patterns in
+        // this list.
+        rtmp-allow-list = [
+          // By default, all services are allowed
+          ".*"
+        ]
+    }
+    ffmpeg {
+        resolution = JIBRI_RES_CONF
+    }
+    chrome {
+        // The flags which will be passed to chromium when launching
+        flags = [
+          "--use-fake-ui-for-media-stream",
+          "--start-maximized",
+          "--kiosk",
+          "--enabled",
+          "--disable-infobars",
+          "--autoplay-policy=no-user-gesture-required",
+          "--ignore-certificate-errors",
+          "--disable-dev-shm-usage"
+        ]
+    }
+    stats {
+        enable-stats-d = true
+    }
+    call-status-checks {
+        // If all clients have their audio and video muted and if Jibri does not
+        // detect any data stream (audio or video) comming in, it will stop
+        // recording after NO_MEDIA_TIMEOUT expires.
+        no-media-timeout = 30 seconds
+
+        // If all clients have their audio and video muted, Jibri consideres this
+        // as an empty call and stops the recording after ALL_MUTED_TIMEOUT expires.
+        all-muted-timeout = 10 minutes
+
+        // When detecting if a call is empty, Jibri takes into consideration for how
+        // long the call has been empty already. If it has been empty for more than
+        // DEFAULT_CALL_EMPTY_TIMEOUT, it will consider it empty and stop the recording.
+        default-call-empty-timeout = 30 seconds
+    }
+    recording {
+         recordings-directory = "DIR_RECORD"
+         finalize-script = "REC_DIR"
+    }
+    api {
+        xmpp {
+            environments = [
+                {
+                // A user-friendly name for this environment
+                name = "JB_NAME"
+
+                // A list of XMPP server hosts to which we'll connect
+                xmpp-server-hosts = [ "DOMAIN" ]
+
+                // The base XMPP domain
+                xmpp-domain = "DOMAIN"
+
+                // The MUC we'll join to announce our presence for
+                // recording and streaming services
+                control-muc {
+                    domain = "internal.auth.DOMAIN"
+                    room-name = "JibriBrewery"
+                    nickname = "Live"
+                }
+
+                // The login information for the control MUC
+                control-login {
+                    domain = "auth.DOMAIN"
+                    username = "jibri"
+                    password = "JB_AUTH_PASS"
+                }
+
+                // An (optional) MUC configuration where we'll
+                // join to announce SIP gateway services
+            //    sip-control-muc {
+            //        domain = "domain"
+            //        room-name = "room-name"
+            //        nickname = "nickname"
+            //    }
+
+                // The login information the selenium web client will use
+                call-login {
+                    domain = "recorder.DOMAIN"
+                    username = "recorder"
+                    password = "JB_REC_PASS"
+                }
+
+                // The value we'll strip from the room JID domain to derive
+                // the call URL
+                strip-from-room-domain = "conference."
+
+                // How long Jibri sessions will be allowed to last before
+                // they are stopped.  A value of 0 allows them to go on
+                // indefinitely
+                usage-timeout = 0 hour
+
+                // Whether or not we'll automatically trust any cert on
+                // this XMPP domain
+                trust-all-xmpp-certs = true
+                }
+            ]
+        }
+    }
+}

files/nextcloud.conf

@@ -0,0 +1,177 @@
+# Nextcloud 28 nginx - configuration
+upstream php-handler {
+    #server 127.0.0.1:9000;
+    server unix:/run/php/php_PHPVER-fpm.sock;
+}
+
+# Set the `immutable` cache control options only for assets with a cache busting `v` argument
+map $arg_v $asset_immutable {
+    "" "";
+    default "immutable";
+}
+
+server {
+    listen 80;
+    listen [::]:80;
+    server_name _NC_DOMAIN;
+    # enforce https
+    return 301 https://\$server_name\$request_uri;
+}
+
+server {
+    listen _NC_NGINX_SSL_PORT ssl http2;
+    listen [::]:_NC_NGINX_SSL_PORT ssl http2;
+    server_name _NC_DOMAIN;
+
+    # Path to the root of your installation
+    root _NC_PATH/;
+
+    ssl_certificate /etc/letsencrypt/live/_NC_DOMAIN/fullchain.pem;
+    ssl_certificate_key /etc/letsencrypt/live/_NC_DOMAIN/privkey.pem;
+
+    # Prevent nginx HTTP Server Detection
+    server_tokens off;
+
+    # HSTS settings
+    # WARNING: Only add the preload option once you read about
+    # the consequences in https://hstspreload.org/. This option
+    # will add the domain to a hardcoded list that is shipped
+    # in all major browsers and getting removed from this list
+    # could take several months.
+    #add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload" always;
+
+    # set max upload size and increase upload timeout:
+    client_max_body_size 512M;
+    client_body_timeout 300s;
+    fastcgi_buffers 64 4K;
+
+    # Enable gzip but do not remove ETag headers
+    gzip on;
+    gzip_vary on;
+    gzip_comp_level 4;
+    gzip_min_length 256;
+    gzip_proxied expired no-cache no-store private no_last_modified no_etag auth;
+    gzip_types application/atom+xml text/javascript application/javascript application/json application/ld+json application/manifest+json application/rss+xml application/vnd.geo+json application/vnd.ms-fontobject application/wasm application/x-font-ttf application/x-web-app-manifest+json application/xhtml+xml application/xml font/opentype image/bmp image/svg+xml image/x-icon text/cache-manifest text/css text/plain text/vcard text/vnd.rim.location.xloc text/vtt text/x-component text/x-cross-domain-policy;
+
+    # Pagespeed is not supported by Nextcloud, so if your server is built
+    # with the `ngx_pagespeed` module, uncomment this line to disable it.
+    #pagespeed off;
+
+    # The settings allows you to optimize the HTTP2 bandwidth.
+    # See https://blog.cloudflare.com/delivering-http-2-upload-speed-improvements/
+    # for tuning hints
+    client_body_buffer_size 512k;
+
+    # HTTP response headers borrowed from Nextcloud `.htaccess`
+    add_header Referrer-Policy                   "no-referrer"       always;
+    add_header X-Content-Type-Options            "nosniff"           always;
+    add_header X-Frame-Options                   "SAMEORIGIN"        always;
+    add_header X-Permitted-Cross-Domain-Policies "none"              always;
+    add_header X-Robots-Tag                      "noindex, nofollow" always;
+    add_header X-XSS-Protection                  "1; mode=block"     always;
+
+    # Remove X-Powered-By, which is an information leak
+    fastcgi_hide_header X-Powered-By;
+
+    # Specify how to handle directories -- specifying `/index.php$request_uri`
+    # here as the fallback means that Nginx always exhibits the desired behaviour
+    # when a client requests a path that corresponds to a directory that exists
+    # on the server. In particular, if that directory contains an index.php file,
+    # that file is correctly served; if it doesn't, then the request is passed to
+    # the front-end controller. This consistent behaviour means that we don't need
+    # to specify custom rules for certain paths (e.g. images and other assets,
+    # `/updater`, `/ocs-provider`), and thus
+    # `try_files $uri $uri/ /index.php$request_uri`
+    # always provides the desired behaviour.
+    index index.php index.html /index.php$request_uri;
+
+    # Rule borrowed from `.htaccess` to handle Microsoft DAV clients
+    location = / {
+        if ( $http_user_agent ~ ^DavClnt ) {
+            return 302 /remote.php/webdav/$is_args$args;
+        }
+    }
+
+    location = /robots.txt {
+        allow all;
+        log_not_found off;
+        access_log off;
+    }
+
+    # Make a regex exception for `/.well-known` so that clients can still
+    # access it despite the existence of the regex rule
+    # `location ~ /(\.|autotest|...)` which would otherwise handle requests
+    # for `/.well-known`.
+    location ^~ /.well-known {
+        # The rules in this block are an adaptation of the rules
+        # in `.htaccess` that concern `/.well-known`.
+
+        location = /.well-known/carddav { return 301 /remote.php/dav/; }
+        location = /.well-known/caldav  { return 301 /remote.php/dav/; }
+
+        location /.well-known/acme-challenge    { try_files $uri $uri/ =404; }
+        location /.well-known/pki-validation    { try_files $uri $uri/ =404; }
+
+        # Let Nextcloud's API for `/.well-known` URIs handle all other
+        # requests by passing them to the front-end controller.
+        return 301 /index.php$request_uri;
+    }
+
+    # Rules borrowed from `.htaccess` to hide certain paths from clients
+    location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)(?:$|/)  { return 404; }
+    location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console)                { return 404; }
+
+    # Ensure this block, which passes PHP files to the PHP process, is above the blocks
+    # which handle static assets (as seen below). If this block is not declared first,
+    # then Nginx will encounter an infinite rewriting loop when it prepends `/index.php`
+    # to the URI, resulting in a HTTP 500 error response.
+    location ~ \.php(?:$|/) {
+        # Required for legacy support
+        rewrite ^/(?!index|remote|public|cron|core\/ajax\/update|status|ocs\/v[12]|updater\/.+|ocs-provider\/.+|.+\/richdocumentscode\/proxy) /index.php$request_uri;
+
+        fastcgi_split_path_info ^(.+?\.php)(/.*)$;
+        set $path_info $fastcgi_path_info;
+
+        try_files $fastcgi_script_name =404;
+
+        include fastcgi_params;
+        fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name;
+        fastcgi_param PATH_INFO $path_info;
+        fastcgi_param HTTPS on;
+
+        fastcgi_param modHeadersAvailable true;         # Avoid sending the security headers twice
+        fastcgi_param front_controller_active true;     # Enable pretty urls
+        fastcgi_pass php-handler;
+
+        fastcgi_intercept_errors on;
+        fastcgi_request_buffering off;
+
+        fastcgi_max_temp_file_size 0;
+    }
+
+    # Serve static files
+    location ~ \.(?:css|js|mjs|svg|gif|png|jpg|ico|wasm|tflite|map|ogg|flac)$ {
+        try_files $uri /index.php$request_uri;
+        add_header Cache-Control "public, max-age=15778463, $asset_immutable";
+        access_log off;     # Optional: Don't log access to assets
+
+        location ~ \.wasm$ {
+            default_type application/wasm;
+        }
+    }
+
+    location ~ \.woff2?$ {
+        try_files $uri /index.php$request_uri;
+        expires 7d;         # Cache-Control policy borrowed from `.htaccess`
+        access_log off;     # Optional: Don't log access to assets
+    }
+
+    # Rule borrowed from `.htaccess`
+    location /remote {
+        return 301 /remote.php$request_uri;
+    }
+
+    location / {
+        try_files $uri $uri/ /index.php$request_uri;
+    }
+}

grafana.sh

@@ -8,7 +8,7 @@
 # by "mephisto"
 #
 # Igor Kerstges © - 2021
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 #
 # GPLv3 or later.
 
@@ -43,11 +43,22 @@ systemctl enable "$1"
 systemctl restart "$1"
 systemctl status "$1"
 }
+test_match() {
+    if grep -q "$1" "$2" ; then
+        echo "$(basename "$2") - OK..."
+    else
+        echo "$(basename "$2"), FAIL..."
+        echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
+        exit
+    fi
+}
 MAIN_TEL="/etc/telegraf/telegraf.conf"
 TEL_JIT="/etc/telegraf/telegraf.d/jitsi.conf"
 GRAFANA_INI="/etc/grafana/grafana.ini"
 DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
 WS_CONF="/etc/nginx/sites-available/$DOMAIN.conf"
+WS_MATCH1="# ensure all static content can always be found first"
+WS_MATCH2="upstream prosody {"
 GRAFANA_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 14 | head -n1)"
 
 # Min requirements
@@ -57,11 +68,17 @@ apt-get install -y gnupg2 \
                    wget \
                    jq
 
+# Make sure we can rely on the match strings.
+printf "> Testing match strings on config files.\n"
+test_match "$WS_MATCH1" "$WS_CONF"
+
 echo "
 # Setup InfluxDB Packages
 "
-curl -s https://repos.influxdata.com/influxdata-archive.key > /etc/apt/trusted.gpg.d/influxdata-archive.key
+curl -s https://repos.influxdata.com/influxdata-archive.key > \
-echo "deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive.key] https://repos.influxdata.com/debian buster stable" | sudo tee /etc/apt/sources.list.d/influxdb.list
+    /etc/apt/trusted.gpg.d/influxdata-archive.key
+echo "deb [signed-by=/etc/apt/trusted.gpg.d/influxdata-archive.key] https://repos.influxdata.com/debian buster stable" | \
+    sudo tee /etc/apt/sources.list.d/influxdb.list
 apt-get update && apt-get install influxdb -y
 run_service influxdb
 
@@ -70,7 +87,8 @@ echo "
 "
 curl -s https://apt.grafana.com/gpg-full.key | \
 gpg --dearmor | tee /etc/apt/trusted.gpg.d/grafana-full-key.gpg  >/dev/null
-add-apt-repository "deb https://packages.grafana.com/oss/deb stable main"
+echo "deb https://packages.grafana.com/oss/deb stable main" | \
+    sudo tee /etc/apt/sources.list.d/grafana_com_oss_deb.list
 apt-get update && apt-get install grafana -y
 run_service grafana-server
 
@@ -138,11 +156,13 @@ echo '
 # extra options to pass to the JVB daemon
 JVB_OPTS="--apis=rest,xmpp"' >>  /etc/jitsi/videobridge/config
 sed -i "s|TRANSPORT=muc|TRANSPORT=muc,colibri|" /etc/jitsi/videobridge/sip-communicator.properties
+# Enable videobridge REST API
+hocon -f /etc/jitsi/videobridge/jvb.conf set videobridge.apis.rest.enabled true
 systemctl restart jitsi-videobridge2
 
 echo -e "\n# Setup Grafana nginx domain\n"
 sed -i "s|;protocol =.*|protocol = http|" $GRAFANA_INI
-sed -i "s|;http_addr =.*|http_addr = localhost|" $GRAFANA_INI
+sed -i "s|;http_addr =.*|http_addr = 127.0.0.1|" $GRAFANA_INI
 sed -i "s|;http_port =.*|http_port = 3000|" $GRAFANA_INI
 sed -i "s|;domain =.*|domain = $DOMAIN|" $GRAFANA_INI
 sed -i "s|;enforce_domain =.*|enforce_domain = false|" $GRAFANA_INI
@@ -160,10 +180,30 @@ while [ $secs -gt 0 ]; do
 done
 
 if [ -f "$WS_CONF" ]; then
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ location \~ \^\/(grafana\/|grafana\/login) {" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ # Proxy Grafana." "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ \ \ \ \ proxy_pass http:\/\/localhost:3000;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ location ~ ^/(grafana/|grafana/login) {" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_set_header Host \$host;" "$WS_CONF"
-    sed -i "/# ensure all static content can always be found first/i \\\n" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_pass http://grafana;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ }" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ # Proxy Grafana Live WebSocket connections." "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ location /grafana/api/live/ {" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_http_version 1.1;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_set_header Upgrade \$http_upgrade;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_set_header Connection \$connection_upgrade;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_set_header Host \$host;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ proxy_pass http://grafana;" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \ \ \ \ }" "$WS_CONF"
+
+    sed -i "/$WS_MATCH2/i # This is required to proxy Grafana Live WebSocket connections." "$WS_CONF"
+    sed -i "/$WS_MATCH2/i map \$http_upgrade \$connection_upgrade {" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i \ \ default upgrade;" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i \ \ '' close;" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i }" "$WS_CONF"
+    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i upstream grafana {" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i \ \ server localhost:3000;" "$WS_CONF"
+    sed -i "/$WS_MATCH2/i }" "$WS_CONF"
     systemctl restart nginx
 else
     echo "No app configuration done to server file, please report to:
@@ -179,7 +219,7 @@ PUT -H "Content-Type: application/json;charset=UTF-8" -d \
   \"oldPassword\": \"admin\",
   \"newPassword\": \"$GRAFANA_PASS\",
   \"confirmNew\": \"$GRAFANA_PASS\"
-}" http://localhost:3000/api/user/password; echo ""
+}" http://127.0.0.1:3000/api/user/password; echo ""
 
 echo "
 # Create InfluxDB datasource
@@ -189,16 +229,16 @@ POST -H 'Content-Type: application/json;charset=UTF-8' -d \
 '{
     "name": "InfluxDB",
     "type": "influxdb",
-    "url": "http://localhost:8086",
+    "url": "http://127.0.0.1:8086",
     "access": "proxy",
     "isDefault": true,
     "database": "jitsi"
-}' http://localhost:3000/api/datasources; echo ""
+}' http://127.0.0.1:3000/api/datasources; echo ""
 
 echo "
 # Add Grafana Dashboard
 "
-grafana_host="http://localhost:3000"
+grafana_host="http://127.0.0.1:3000"
 grafana_cred="admin:$GRAFANA_PASS"
 grafana_datasource="InfluxDB"
 ds=(11969);

images/watermark2.svg

@@ -0,0 +1 @@
+<?xml version="1.0" encoding="UTF-8"?><svg xmlns="http://www.w3.org/2000/svg" width="1" height="1"/>

jigasi-vosk-backend.sh

@@ -0,0 +1,128 @@
+#!/bin/bash
+# Quick Jigasi Installer with VOSK backend - *buntu (LTS) based systems.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+#Check if user is root
+if ! [ "$(id -u)" = 0 ]; then
+   echo "You need to be root or have sudo privileges!"
+   exit 0
+fi
+exit_if_not_installed() {
+if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" != "1" ]; then
+    echo " This instance doesn't have $1 installed, exiting..."
+    echo " If you think this is an error, please report to:
+    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues "
+    exit
+fi
+}
+
+clear
+echo ''
+echo '########################################################################'
+echo '                       Jigasi Transcript addon'
+echo '########################################################################'
+echo '                    by Software, IT & Networks Ltd'
+echo ''
+
+exit_if_not_installed jitsi-meet
+
+DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
+JIG_TRANSC_PASWD="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 16 | head -n1)"
+JIG_SIP_PROP="/etc/jitsi/jigasi/sip-communicator.properties"
+export DOMAIN
+export JIG_TRANSC_PASWD
+
+apt-get -q2 update
+
+# Disable SIP account prompt by default
+echo "jigasi	jigasi/sip-account	string	''" | debconf-set-selections
+echo "jigasi	jigasi/sip-password	password	''" | debconf-set-selections
+
+echo "Installing Jigasi, SIP configuration disabled by default."
+apt-get -y install gettext-base jigasi docker.io
+
+echo "Please select a language for the VOSK transcription model:"
+echo "1) Chinese"
+echo "2) English"
+echo "3) French"
+echo "4) German"
+echo "5) Hindi"
+echo "6) Japanese"
+echo "7) Russian"
+echo "8) Spanish"
+
+read -p "Enter the number corresponding to your language choice: " -r lang_choice
+
+case $lang_choice in
+    1)
+        echo "You selected Chinese."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-cn"
+        ;;
+    2)
+        echo "You selected English."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-en"
+        ;;
+    3)
+        echo "You selected French."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-fr"
+        ;;
+    4)
+        echo "You selected German."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-de"
+        ;;
+    5)
+        echo "You selected Hindi."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-hi"
+        ;;
+    6)
+        echo "You selected Japanese."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-ja"
+        ;;
+    7)
+        echo "You selected Russian."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-ru"
+        ;;
+    8)
+        echo "You selected Spanish."
+        VOSK_DOCKER_MODEL="alphacep/kaldi-es"
+        ;;
+    *)
+        echo "Invalid selection. Please choose a number between 1 and 8."
+        ;;
+esac
+
+# Running selected VOSK docker model.
+docker run -d --restart always -p 2700:2700 ${VOSK_DOCKER_MODEL}:latest
+
+echo "Setting up Jigasi transcript with current platform..."
+
+# Jitsi Meet
+echo "> Patching Jitsi Meet's config.js for Transcription support."
+echo "  Read more at patches/jigasi/001-jigasi-meet-config.patch file"
+envsubst < patches/jigasi/001-jigasi-meet-config.patch | \
+  patch --no-backup-if-mismatch -d / -p1
+
+# Jigasi
+echo "> Patching jigasi's sip-communicator.properties configuration."
+echo "  Read more at patches/jigasi/002-jigasi-sip-properties.patch file"
+cp "$JIG_SIP_PROP" ${JIG_SIP_PROP}-dpkg-file
+envsubst < patches/jigasi/002-jigasi-sip-properties.patch | \
+  patch --no-backup-if-mismatch -d / -p1
+
+# Create transcribe user on hidden domain.
+prosodyctl register transcriber recorder."$DOMAIN" "$JIG_TRANSC_PASWD"
+
+# Restart services.
+systemctl restart prosody \
+                  jicofo \
+                  jigasi \
+                  jibri* \
+                  jitsi-videobridge2
+
+echo ""
+echo "Full transcript files are available at:"
+echo "--> /var/lib/jigasi/transcripts/"
+echo ""
+echo "Happy transcripting!"
+echo ""

jitsi-updater.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet recurring upgrader and customization keeper
 # for Debian/*buntu binaries.
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option
@@ -42,7 +42,9 @@ apt_repo="/etc/apt/sources.list.d"
 ENABLE_BLESSM="TBD"
 G_CHROME=$(apt-cache madison google-chrome-stable|awk '{print$3}'|cut -d. -f1-3)
 CHROMELAB_URL="https://googlechromelabs.github.io/chrome-for-testing"
-CHD_LTST_DWNL=$(curl -s $CHROMELAB_URL/known-good-versions-with-downloads.json | jq -r ".versions[].downloads.chromedriver | select(. != null) | .[].url" | grep linux64 | grep "$G_CHROME" | tail -1)
+CHD_LTST_DWNL=$(curl -s $CHROMELAB_URL/known-good-versions-with-downloads.json | \
+                jq -r ".versions[].downloads.chromedriver | select(. != null) | .[].url" | \
+                grep linux64 | grep "$G_CHROME" | tail -1)
 CHD_LTST=$(awk -F '/' '{print$7}' <<< "$CHD_LTST_DWNL")
 CHD_LTST_2D="$(cut -d "." -f 1,2 <<<  "$CHD_LTST")"
 CHDB="$(whereis chromedriver | awk '{print$2}')"
@@ -123,6 +125,7 @@ update_nodejs_repo() {
         -o Dir::Etc::sourceparts="-" -o APT::Get::List-Cleanup="0"
     apt-get install -q2 --only-upgrade <<< printf "${nodejs_package[@]}"
 }
+check_latest_gc() {
 printwc "${Purple}" "Checking for Google Chrome\n"
 if [ -f /usr/bin/google-chrome ]; then
     GOOGL_VER_2D="$(/usr/bin/google-chrome --version|awk '{printf "%.1f\n", $NF}')"
@@ -130,8 +133,11 @@ else
     printwc "${Yellow}" " -> Seems there is no Google Chrome installed\n"
     IS_GLG_CHRM="no"
 fi
+}
+check_latest_gc
 upgrade_cd() {
 if [ -n "$GOOGL_VER_2D" ]; then
+    check_latest_gc
     if version_gt "$GOOGL_VER_2D" "$CHD_VER_2D" ; then
         echo "Upgrading Chromedriver to Google Chromes version"
         wget -q "$CHD_LTST_DWNL" \
@@ -259,6 +265,10 @@ printwc "${Purple}" "========== Enable $NC_DOMAIN for sync client ==========\n"
         echo "$NC_DOMAIN seems to be on place, skipping..."
     fi
 fi
+
+# Final check & upgrade call.
+check_lst_cd
+
 if [ "$JIBRI_NODE" = "yes" ]; then
     restart_jibri
 else

jm-bm.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Jitsi Meet brandless mode
 # for Debian/*buntu binaries.
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option
@@ -27,6 +27,7 @@ BUNDLE_JS="/usr/share/jitsi-meet/libs/app.bundle.min.js"
 #
 JM_IMG_PATH="/usr/share/jitsi-meet/images"
 WTM2_PATH="$JM_IMG_PATH/watermark2.png"
+WTM2_SVG_PATH="$JM_IMG_PATH/watermark2.svg"
 FICON_PATH="$JM_IMG_PATH/favicon2.ico"
 REC_ICON_PATH="$JM_IMG_PATH/gnome_record.png"
 #
@@ -36,29 +37,30 @@ PART_USER="Participant"
 LOCAL_USER="me"
 #
 #SEC_ROOM="TBD"
+copy_if_not_there() {
+	if [ ! -f "$1" ]; then
+        cp images/"$(echo $1|xargs basename)" "$1"
+    else
+        echo "$(echo $1|xargs basename) file exists, skipping copying..."
+    fi
+}
 echo '
 #--------------------------------------------------
 # Applying Brandless mode
 #--------------------------------------------------
 '
+
 #Watermark
-if [ ! -f "$WTM2_PATH" ]; then
+copy_if_not_there "$WTM2_PATH"
-    cp images/watermark2.png "$WTM2_PATH"
+
-else
+#Watermark svg
-    echo "watermark2 file exists, skipping copying..."
+copy_if_not_there "$WTM2_SVG_PATH"
-fi
+
 #Favicon
-if [ ! -f "$FICON_PATH" ]; then
+copy_if_not_there "$FICON_PATH"
-    cp images/favicon2.ico "$FICON_PATH"
+
-else
-    echo "favicon2 file exists, skipping copying..."
-fi
 #Local recording icon
-if [ ! -f "$REC_ICON_PATH" ];then
+copy_if_not_there "$REC_ICON_PATH"
-    cp images/gnome_record.png "$REC_ICON_PATH"
-else
-    echo "recording icon exists, skipping copying..."
-fi
 
 #Custom / Remove icons
 sed -i "s|watermark.png|watermark2.png|g" "$CSS_FILE"
@@ -70,6 +72,10 @@ sed -i "s|icon-cloud.png|gnome_record.png|g" "$BUNDLE_JS"
 if ! grep -q ".leftwatermark{display:none" "$CSS_FILE" ; then
     sed -i "s|.leftwatermark{|.leftwatermark{display:none;|" "$CSS_FILE"
 fi
+#Replace App logo
+sed -i "s|// defaultLogoUrl: .*|    defaultLogoUrl: 'images/watermark2.svg',|" "$MEET_CONF"
+#Overwrite favicon svg
+cp images/watermark2.svg $JM_IMG_PATH/favicon.svg
 
 #Customize room title
 sed -i "s|Jitsi Meet|$APP_NAME|g" "$TITLE_FILE"

jra_nextcloud.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JRA (Jibri Recordings Access) via Nextcloud
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option
@@ -14,7 +14,7 @@ done
 
 #DEBUG
 if [ "$MODE" = "debug" ]; then
-set -x
+    set -x
 fi
 
 if ! [ "$(id -u)" = 0 ]; then
@@ -42,14 +42,9 @@ apt-get update -q2
 # Manually add prerequisites.
 apt-get install -y curl letsencrypt nginx
 
-DISTRO_RELEASE="$(lsb_release -sc)"
+MIN_PHP="8.2"
 DOMAIN="$(find /etc/prosody/conf.d/ -name \*.lua|awk -F'.cfg' '!/localhost/{print $1}'|xargs basename)"
-PHP_REPO="$(apt-cache policy | awk '/http/&&/php/{print$2}' | awk -F "/" 'NR==1{print$5}')"
-PHPVER="$(apt-cache madison php|grep -v ppa|awk -F'[:+]' 'NR==1{print $2}')"
 PSGVER="$(apt-cache madison postgresql|tr -d '[:blank:]'|awk -F'[|+]' 'NR==1{print $2}')"
-PHP_FPM_DIR="/etc/php/$PHPVER/fpm"
-PHP_INI="$PHP_FPM_DIR/php.ini"
-PHP_CONF="/etc/php/$PHPVER/fpm/pool.d/www.conf"
 NC_NGINX_SSL_PORT="$(grep "listen 44" /etc/nginx/sites-available/"$DOMAIN".conf | awk '{print$2}')"
 [ -z "$NC_NGINX_SSL_PORT" ] && NC_NGINX_SSL_PORT="443"
 NC_REPO="https://download.nextcloud.com/server/releases"
@@ -64,31 +59,11 @@ DIR_RECORD="$(awk  -F '"' '/RECORDING/{print$2}'  /home/jibri/finalize_recording
 REDIS_CONF="/etc/redis/redis.conf"
 JITSI_MEET_PROXY="/etc/nginx/modules-enabled/60-jitsi-meet.conf"
 [ -f "$JITSI_MEET_PROXY" ] && PREAD_PROXY=$(grep -nr "preread_server_name" "$JITSI_MEET_PROXY" | cut -d ":" -f1)
-PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
+PUBLIC_IP="$(dig -4 +short myip.opendns.com @resolver1.opendns.com)"
 ISO3166_CODE=TBD
 NL="$(printf '\n  ')"
-TMP_GPG_REPO="$(mktemp -d)"
 
-add_gpg_keyring() {
+
-apt-key adv --recv-keys --keyserver keyserver.ubuntu.com "$1"
-apt-key export "$1" | gpg --dearmour | tee "$TMP_GPG_REPO"/"$1".gpg >/dev/null
-apt-key del "$1"
-mv "$TMP_GPG_REPO"/"$1".gpg /etc/apt/trusted.gpg.d/
-}
-install_aval_package() {
-for i in $1
-  do
-     if [ -z "$(apt-cache madison "$i" 2>/dev/null)" ]; then
-     echo " > Package $i not available on repo."
-     else
-     echo " > Add package $i to the install list"
-     packages="$packages $i"
-     fi
- done
- echo "$packages"
- apt-get -y install $packages
- packages=""
-}
 exit_ifinstalled() {
 if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
     echo " This instance already has $1 installed, exiting..."
@@ -105,18 +80,6 @@ else
     apt-get -yq2 install "$1"
 fi
 }
-add_php() {
-if [ "$PHP_REPO" = "php" ]; then
-    echo "PHP $PHPVER already installed"
-    apt-get -q2 update
-    apt-get -yq2 dist-upgrade
-else
-    echo "# Adding Ondrej PHP $PHPVER PPA Repository"
-    add_gpg_keyring E5267A6C
-    echo "deb [arch=amd64] http://ppa.launchpad.net/ondrej/php/ubuntu $DISTRO_RELEASE main" > /etc/apt/sources.list.d/php"$PHPVER".list
-    apt-get update -q2
-fi
-}
 while [[ "$ANS_NCD" != "yes" ]]
 do
   read -p "> Please set your domain (or subdomain) here for Nextcloud: (e.g.: cloud.domain.com)$NL" -r NC_DOMAIN
@@ -132,9 +95,11 @@ do
     echo "   - Please try again."
   fi
 done
+sleep .1
   #Simple DNS test
 if [ "$PUBLIC_IP" = "$(dig -4 +short "$NC_DOMAIN"|awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
   echo -e "Server public IP  & DNS record for $NC_DOMAIN seems to match, continuing...\n\n"
+  sleep .1
 else
   echo "Server public IP ($PUBLIC_IP) & DNS record for $NC_DOMAIN don't seem to match."
   echo "  > Please check your dns records are applied and updated, otherwise Nextcloud may fail."
@@ -146,7 +111,7 @@ else
   exit
   fi
 fi
-
+sleep .1
 NC_NGINX_CONF="/etc/nginx/sites-available/$NC_DOMAIN.conf"
 while [ -z "$NC_USER" ]
 do
@@ -155,6 +120,7 @@ do
         echo " - This field is mandatory."
     fi
 done
+sleep .1
 while [ -z "$NC_PASS" ]  || [ ${#NC_PASS} -lt 8 ]
 do
     read -p "Nextcloud user password: " -r NC_PASS
@@ -162,6 +128,7 @@ do
         echo -e " - This field is mandatory. \nPlease make sure it's at least 8 characters.\n"
     fi
 done
+sleep .1
 #Enable HSTS
 while [ "$ENABLE_HSTS" != "yes" ] && [ "$ENABLE_HSTS" != "no" ]
 do
@@ -174,7 +141,7 @@ do
         echo " - HSTS will be enabled."
     fi
 done
-
+sleep .1
 echo -e "#Default country phone code\n
 > Starting at Nextcloud 21.x it's required to set a default country phone ISO 3166-1 alpha-2 code.\n
 >>> https://en.wikipedia.org/wiki/ISO_3166-1_alpha-2#Officially_assigned_code_elements  <<<\n"
@@ -209,241 +176,39 @@ exit_ifinstalled postgresql-"$PSGVER"
 # PostgresSQL
 install_ifnot postgresql-"$PSGVER"
 
-# PHP 7.4 / 8.1
-add_php
-install_aval_package " \
-            imagemagick \
-            php$PHPVER-fpm \
-            php$PHPVER-bcmath \
-            php$PHPVER-bz2 \
-            php$PHPVER-curl \
-            php$PHPVER-gd \
-            php$PHPVER-gmp \
-            php$PHPVER-imagick \
-            php$PHPVER-intl \
-            php$PHPVER-json \
-            php$PHPVER-ldap \
-            php$PHPVER-mbstring \
-            php$PHPVER-pgsql \
-            php$PHPVER-redis \
-            php$PHPVER-soap \
-            php$PHPVER-xml \
-            php$PHPVER-xmlrpc \
-            php$PHPVER-zip \
-            redis-server \
-            unzip \
-            "
 
-#System related
+#--------------------------------------------------
-install_ifnot smbclient
+# Prepare PHP
-sed -i "s|.*env\[HOSTNAME\].*|env\[HOSTNAME\] = \$HOSTNAME|" "$PHP_CONF"
+#--------------------------------------------------
-sed -i "s|.*env\[PATH\].*|env\[PATH\] = /usr/local/bin:/usr/bin:/bin|" "$PHP_CONF"
-sed -i "s|.*env\[TMP\].*|env\[TMP\] = /tmp|" "$PHP_CONF"
-sed -i "s|.*env\[TMPDIR\].*|env\[TMPDIR\] = /tmp|" "$PHP_CONF"
-sed -i "s|.*env\[TEMP\].*|env\[TEMP\] = /tmp|" "$PHP_CONF"
-sed -i "s|;clear_env = no|clear_env = no|" "$PHP_CONF"
 
-echo "
+if [ "$MODE" = "debug" ]; then
-Tunning PHP.ini...
+    bash -x "$PWD"/tools/prepare_php.sh "$MIN_PHP"
-"
+else
-# Change values in php.ini (increase max file size)
+    bash "$PWD"/tools/prepare_php.sh "$MIN_PHP"
-# max_execution_time
+fi
-sed -i "s|max_execution_time =.*|max_execution_time = 3500|g" "$PHP_INI"
-# max_input_time
-sed -i "s|max_input_time =.*|max_input_time = 3600|g" "$PHP_INI"
-# memory_limit
-sed -i "s|memory_limit =.*|memory_limit = 512M|g" "$PHP_INI"
-# post_max
-sed -i "s|post_max_size =.*|post_max_size = 1025M|g" "$PHP_INI"
-# upload_max
-sed -i "s|upload_max_filesize =.*|upload_max_filesize = 1024M|g" "$PHP_INI"
-
-phpenmod opcache
-{
-
-echo "# OPcache settings for Nextcloud"
-echo "opcache.enable=1"
-echo "opcache.enable_cli=1"
-echo "opcache.interned_strings_buffer=8"
-echo "opcache.max_accelerated_files=10000"
-echo "opcache.memory_consumption=256"
-echo "opcache.save_comments=1"
-echo "opcache.revalidate_freq=1"
-echo "opcache.validate_timestamps=1"
-} >> "$PHP_INI"
-
-systemctl restart php"$PHPVER"-fpm.service
 
 #--------------------------------------------------
 # Create DB user
 #--------------------------------------------------
 
 echo -e "\n---- Creating the PgSQL DB & User  ----"
-cd /tmp || return
 sudo -u postgres psql <<DB
 CREATE DATABASE nextcloud_db;
 CREATE USER ${NC_DB_USER} WITH ENCRYPTED PASSWORD '${NC_DB_PASSWD}';
 GRANT ALL PRIVILEGES ON DATABASE ${NC_DB} TO ${NC_DB_USER};
 DB
-echo "Done!
+echo -e "\nDone!\n"
-"
 
-#nginx - configuration
+# Add .mjs as a file extension for javascript
-cat << NC_NGINX > "$NC_NGINX_CONF"
+sed -i "/application\/javascript/s|js.*;|js mjs;|" /etc/nginx/mime.types
-#nextcloud config
-upstream php-handler {
-    #server 127.0.0.1:9000;
-    server unix:/run/php/php${PHPVER}-fpm.sock;
-}
 
-server {
+# nginx conf setup.
-    listen 80;
+cp files/nextcloud.conf "$NC_NGINX_CONF"
-    listen [::]:80;
+sed -i "s|_PHPVER|$MIN_PHP|g" "$NC_NGINX_CONF"
-    server_name $NC_DOMAIN;
+sed -i "s|_NC_DOMAIN|$NC_DOMAIN|g" "$NC_NGINX_CONF"
-    # enforce https
+sed -i "s|_NC_NGINX_SSL_PORT|$NC_NGINX_SSL_PORT|g" "$NC_NGINX_CONF"
-    return 301 https://\$server_name\$request_uri;
+sed -i "s|_NC_PATH|$NC_PATH|g" "$NC_NGINX_CONF"
-}
 
-server {
-    listen $NC_NGINX_SSL_PORT ssl http2;
-    listen [::]:$NC_NGINX_SSL_PORT ssl http2;
-    server_name $NC_DOMAIN;
-
-    ssl_certificate /etc/letsencrypt/live/$NC_DOMAIN/fullchain.pem;
-    ssl_certificate_key /etc/letsencrypt/live/$NC_DOMAIN/privkey.pem;
-
-    # HSTS settings
-    # WARNING: Only add the preload option once you read about
-    # the consequences in https://hstspreload.org/. This option
-    # will add the domain to a hardcoded list that is shipped
-    # in all major browsers and getting removed from this list
-    # could take several months.
-    #add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;" always;
-
-   # Enable gzip but do not remove ETag headers
-    gzip on;
-    gzip_vary on;
-    gzip_comp_level 4;
-    gzip_min_length 256;
-    gzip_proxied expired no-cache no-store private no_last_modified no_etag auth;
-    gzip_types application/atom+xml application/javascript application/json application/ld+json application/manifest+json application/rss+xml application/vnd.geo+json application/vnd.ms-fontobject application/x-font-ttf application/x-web-app-manifest+json application/xhtml+xml application/xml font/opentype image/bmp image/svg+xml image/x-icon text/cache-manifest text/css text/plain text/vcard text/vnd.rim.location.xloc text/vtt text/x-component text/x-cross-domain-policy;
-
-    # Pagespeed is not supported by Nextcloud, so if your server is built
-    # with the \`ngx_pagespeed\` module, uncomment this line to disable it.
-    #pagespeed off;
-
-    # HTTP response headers borrowed from Nextcloud \`.htaccess\`
-    add_header Referrer-Policy                      "no-referrer"   always;
-    add_header X-Content-Type-Options               "nosniff"       always;
-    add_header X-Download-Options                   "noopen"        always;
-    add_header X-Frame-Options                      "SAMEORIGIN"    always;
-    add_header X-Permitted-Cross-Domain-Policies    "none"          always;
-    add_header X-Robots-Tag                         "none"          always;
-    add_header X-XSS-Protection                     "1; mode=block" always;
-
-    # Remove X-Powered-By, which is an information leak
-    fastcgi_hide_header X-Powered-By;
-
-    # set max upload size
-    client_max_body_size 1024M;
-    fastcgi_buffers 64 4K;
-
-    # Path to the root of your installation
-    root $NC_PATH/;
-
-    # Specify how to handle directories -- specifying \`/index.php\$request_uri\`
-    # here as the fallback means that Nginx always exhibits the desired behaviour
-    # when a client requests a path that corresponds to a directory that exists
-    # on the server. In particular, if that directory contains an index.php file,
-    # that file is correctly served; if it doesn't, then the request is passed to
-    # the front-end controller. This consistent behaviour means that we don't need
-    # to specify custom rules for certain paths (e.g. images and other assets,
-    # \`/updater\`, \`/ocm-provider\`, \`/ocs-provider\`), and thus
-    # \`try_files \$uri \$uri/ /index.php\$request_uri\`
-    # always provides the desired behaviour.
-    index index.php index.html /index.php\$request_uri;
-
-    # Rule borrowed from \`.htaccess\` to handle Microsoft DAV clients
-    location = / {
-        if ( \$http_user_agent ~ ^DavClnt ) {
-            return 302 /remote.php/webdav/\$is_args\$args;
-        }
-    }
-
-    location = /robots.txt {
-        allow all;
-        log_not_found off;
-        access_log off;
-    }
-
-    # Make a regex exception for \`/.well-known\` so that clients can still
-    # access it despite the existence of the regex rule
-    # \`location ~ /(\.|autotest|...)\` which would otherwise handle requests
-    # for \`/.well-known\`.
-    location ^~ /.well-known {
-        # The rules in this block are an adaptation of the rules
-        # in \`.htaccess\` that concern \`/.well-known\`.
-
-        location = /.well-known/carddav { return 301 /remote.php/dav/; }
-        location = /.well-known/caldav  { return 301 /remote.php/dav/; }
-
-        location /.well-known/acme-challenge    { try_files \$uri \$uri/ =404; }
-        location /.well-known/pki-validation    { try_files \$uri \$uri/ =404; }
-
-        # Let Nextcloud's API for \`/.well-known\` URIs handle all other
-        # requests by passing them to the front-end controller.
-        return 301 /index.php\$request_uri;
-    }
-
-    # Rules borrowed from \`.htaccess\` to hide certain paths from clients
-    location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)(?:\$|/)  { return 404; }
-    location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console)                { return 404; }
-
-    # Ensure this block, which passes PHP files to the PHP process, is above the blocks
-    # which handle static assets (as seen below). If this block is not declared first,
-    # then Nginx will encounter an infinite rewriting loop when it prepends \`/index.php\`
-    # to the URI, resulting in a HTTP 500 error response.
-    location ~ \.php(?:\$|/) {
-        fastcgi_split_path_info ^(.+?\.php)(/.*)\$;
-        set \$path_info \$fastcgi_path_info;
-
-        try_files \$fastcgi_script_name =404;
-
-        include fastcgi_params;
-        fastcgi_param SCRIPT_FILENAME \$document_root\$fastcgi_script_name;
-        fastcgi_param PATH_INFO \$path_info;
-        fastcgi_param HTTPS on;
-
-        fastcgi_param modHeadersAvailable true;         # Avoid sending the security headers twice
-        fastcgi_param front_controller_active true;     # Enable pretty urls
-        fastcgi_pass php-handler;
-
-        fastcgi_intercept_errors on;
-        fastcgi_request_buffering off;
-    }
-
-    location ~ \.(?:css|js|svg|gif)\$ {
-        try_files \$uri /index.php\$request_uri;
-        expires 6M;         # Cache-Control policy borrowed from \`.htaccess\`
-        access_log off;     # Optional: Don't log access to assets
-    }
-
-    location ~ \.woff2?\$ {
-        try_files \$uri /index.php\$request_uri;
-        expires 7d;         # Cache-Control policy borrowed from \`.htaccess\`
-        access_log off;     # Optional: Don't log access to assets
-    }
-
-    # Rule borrowed from \`.htaccess\`
-    location /remote {
-        return 301 /remote.php\$request_uri;
-    }
-
-    location / {
-        try_files \$uri \$uri/ /index.php\$request_uri;
-    }
-}
-NC_NGINX
 systemctl stop nginx
 letsencrypt certonly --standalone --renew-by-default --agree-tos -d "$NC_DOMAIN"
 if [ -f /etc/letsencrypt/live/"$NC_DOMAIN"/fullchain.pem ];then
@@ -479,7 +244,7 @@ chown -R www-data:www-data "$NC_PATH"
 chmod -R 755 "$NC_PATH"
 
 echo -e "\nDatabase installation...\n"
-sudo -u www-data php "$NC_PATH"/occ maintenance:install \
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ maintenance:install \
 --database=pgsql \
 --database-name="$NC_DB" \
 --database-user="$NC_DB_USER" \
@@ -494,7 +259,7 @@ sed -i "/simpleSignUpLink.shown/a \ \ \'knowledgebaseenabled\' => false," "$NC_C
 sed -i "s|http://localhost|https://$NC_DOMAIN|" "$NC_CONFIG"
 
 echo -e "\nAdd crontab...\n"
-crontab -u www-data -l | { cat; echo "*/5  *  *  *  * php -f $NC_PATH/cron.php"; } | crontab -u www-data -
+crontab -u www-data -l | { cat; echo "*/5  *  *  *  * php$MIN_PHP -f $NC_PATH/cron.php"; } | crontab -u www-data -
 
 echo -e "\nAdd memcache support...\n"
 sed -i "s|# unixsocket .*|unixsocket /var/run/redis/redis.sock|g" "$REDIS_CONF"
@@ -520,25 +285,24 @@ sed -i "/);/i \ \ )," "$NC_CONFIG"
 echo -e "Done\n"
 
 echo -e "\nAddding & Setting up Files External App for Local storage...\n"
-sudo -u www-data php "$NC_PATH"/occ app:install files_external
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ app:install files_external
-sudo -u www-data php "$NC_PATH"/occ app:enable files_external
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ app:enable files_external
-sudo -u www-data php "$NC_PATH"/occ app:disable support
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ app:disable support
-sudo -u www-data php "$NC_PATH"/occ files_external:import /tmp/jra-nc-app-ef.json
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ files_external:import /tmp/jra-nc-app-ef.json
 
 usermod -a -G jibri www-data
 chmod -R 770 "$DIR_RECORD"
 chmod -R g+s "$DIR_RECORD"
 
 echo -e "\nFixing possible missing tables...\n\n"
-echo "y"|sudo -u www-data php "$NC_PATH"/occ db:convert-filecache-bigint
+echo "y"|sudo -u www-data php$MIN_PHP "$NC_PATH"/occ db:convert-filecache-bigint
-sudo -u www-data php "$NC_PATH"/occ db:add-missing-indices
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ db:add-missing-indices
-sudo -u www-data php "$NC_PATH"/occ db:add-missing-columns
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ db:add-missing-columns
 
 echo -e "\nAdding trusted domain...\n"
-sudo -u www-data php "$NC_PATH"/occ config:system:set trusted_domains 0 --value="$NC_DOMAIN"
+sudo -u www-data php$MIN_PHP "$NC_PATH"/occ config:system:set trusted_domains 0 --value="$NC_DOMAIN"
 
 echo -e "\nSetting JRA domain on jitsi-updater.sh\n"
-cd ~/quick-jibri-installer || return
 sed -i "s|NC_DOMAIN=.*|NC_DOMAIN=\"$NC_DOMAIN\"|" jitsi-updater.sh
 
 echo -e "\nQuick Nextcloud installation complete!\n"

mode/chp-mode.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Custom High Performance Jitsi conf
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

mode/grid/selenium-grid-docker.sh

@@ -1,7 +1,7 @@
 #!/bin/bash
 # Custom Selenium Grid-Node fro Jitsi Meet
 # Pandian © - https://community.jitsi.org/u/Pandian
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

mode/jms-stu.sh

@@ -2,7 +2,7 @@
 # System-tune-up to remove system software restrictions on a huge load of connections.
 # Be aware that hardware/infrastructure resources are the most common limiters.
 #
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

mode/jwt.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # JWT Mode Setup
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

patches/jigasi/001-jigasi-meet-config.patch

@@ -0,0 +1,40 @@
+# Quick Jigasi Installer with VOSK backend - *buntu (LTS) based systems.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+Enable transcription on jitsi meet config.js file.
+
+diff --git a/etc/jitsi/meet/${DOMAIN}-config.js b/etc/jitsi/meet/${DOMAIN}-config.js
+index f412891..f704157 100644
+--- a/etc/jitsi/meet/${DOMAIN}-config.js
++++ b/etc/jitsi/meet/${DOMAIN}-config.js
+@@ -426,9 +426,9 @@ var config = {
+     // autoCaptionOnRecord: false,
+ 
+     // Transcription options.
+-    // transcription: {
++    transcription: {
+     //     // Whether the feature should be enabled or not.
+-    //     enabled: false,
++        enabled: true,
+ 
+     //     // Translation languages.
+     //     // Available languages can be found in
+@@ -443,7 +443,7 @@ var config = {
+     //     // detected based on the environment, e.g. if the app is opened in a chrome instance which
+     //     // is using french as its default language then transcriptions for that participant will be in french.
+     //     // Defaults to true.
+-    //     useAppLanguage: true,
++        useAppLanguage: true,
+ 
+     //     // Transcriber language. This settings will only work if "useAppLanguage"
+     //     // is explicitly set to false.
+@@ -453,7 +453,7 @@ var config = {
+ 
+     //     // Enables automatic turning on transcribing when recording is started
+     //     autoTranscribeOnRecord: false,
+-    // },
++    },
+ 
+     // Misc
+ 

patches/jigasi/002-jigasi-sip-properties.patch

@@ -0,0 +1,80 @@
+# Quick Jigasi Installer with VOSK backend - *buntu (LTS) based systems.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+Modify sip-communicator.properties to run Jigasi along with VOSK Models.
+
+diff --git a/etc/jitsi/jigasi/sip-communicator.properties b/etc/jitsi/jigasi/sip-communicator.properties
+index 7a8d0f3..ae5369a 100644
+--- a/etc/jitsi/jigasi/sip-communicator.properties
++++ b/etc/jitsi/jigasi/sip-communicator.properties
+@@ -165,12 +165,12 @@ org.jitsi.jigasi.xmpp.acc.USE_DEFAULT_STUN_SERVER=false
+ 
+ # If you want jigasi to perform authenticated login instead of anonymous login
+ # to the XMPP server, you can set the following properties.
+-# org.jitsi.jigasi.xmpp.acc.USER_ID=SOME_USER@SOME_DOMAIN
+-# org.jitsi.jigasi.xmpp.acc.PASS=SOME_PASS
+-# org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
++org.jitsi.jigasi.xmpp.acc.USER_ID=transcriber@recorder.${DOMAIN}
++org.jitsi.jigasi.xmpp.acc.PASS=${JIG_TRANSC_PASWD}
++org.jitsi.jigasi.xmpp.acc.ANONYMOUS_AUTH=false
+ 
+ # To fix SSL/TLS required by client but not supported by server
+-#org.jitsi.jigasi.xmpp.acc.ALLOW_NON_SECURE=true
++org.jitsi.jigasi.xmpp.acc.ALLOW_NON_SECURE=true
+ 
+ # Can be used in combination with jitsi-meet module mod_auth_jitsi-shared-secret
+ # To have jigasi use a random username on every call
+@@ -187,7 +187,7 @@ org.jitsi.jigasi.xmpp.acc.USE_DEFAULT_STUN_SERVER=false
+ # Activate this property if you are using self-signed certificates or other
+ # type of non-trusted certicates. In this mode your service trust in the
+ # remote certificates always.
+-# net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true
++net.java.sip.communicator.service.gui.ALWAYS_TRUST_MODE_ENABLED=true
+ 
+ # Enable this property to be able to shutdown gracefully jigasi using
+ # a rest command
+@@ -196,31 +196,31 @@ org.jitsi.jigasi.xmpp.acc.USE_DEFAULT_STUN_SERVER=false
+ # Options regarding Transcription. Read the README for a detailed description
+ # about each property
+ 
+-#org.jitsi.jigasi.ENABLE_TRANSCRIPTION=false
+-#org.jitsi.jigasi.ENABLE_SIP=true
++org.jitsi.jigasi.ENABLE_TRANSCRIPTION=true
++org.jitsi.jigasi.ENABLE_SIP=false
+ 
+ # whether to use the more expensive, but better performing
+ # "video" model when doing transcription
+ # org.jitsi.jigasi.transcription.USE_VIDEO_MODEL = false
+ 
+ # delivering final transcript
+-# org.jitsi.jigasi.transcription.DIRECTORY=/var/lib/jigasi/transcripts
+-# org.jitsi.jigasi.transcription.BASE_URL=http://localhost/
+-# org.jitsi.jigasi.transcription.jetty.port=-1
+-# org.jitsi.jigasi.transcription.ADVERTISE_URL=false
++org.jitsi.jigasi.transcription.DIRECTORY=/var/lib/jigasi/transcripts
++org.jitsi.jigasi.transcription.BASE_URL=http://localhost/
++org.jitsi.jigasi.transcription.jetty.port=-1
++org.jitsi.jigasi.transcription.ADVERTISE_URL=false
+ 
+ # save formats
+-# org.jitsi.jigasi.transcription.SAVE_JSON=false
+-# org.jitsi.jigasi.transcription.SAVE_TXT=true
++org.jitsi.jigasi.transcription.SAVE_JSON=false
++org.jitsi.jigasi.transcription.SAVE_TXT=true
+ 
+ # send formats
+-# org.jitsi.jigasi.transcription.SEND_JSON=true
+-# org.jitsi.jigasi.transcription.SEND_TXT=false
++org.jitsi.jigasi.transcription.SEND_JSON=true
++org.jitsi.jigasi.transcription.SEND_TXT=false
+ 
+ # Vosk server
+-# org.jitsi.jigasi.transcription.customService=org.jitsi.jigasi.transcription.VoskTranscriptionService
++org.jitsi.jigasi.transcription.customService=org.jitsi.jigasi.transcription.VoskTranscriptionService
+ # org.jitsi.jigasi.transcription.vosk.websocket_url={"en": "ws://localhost:2700", "fr": "ws://localhost:2710"}
+-# org.jitsi.jigasi.transcription.vosk.websocket_url=ws://localhost:2700
++org.jitsi.jigasi.transcription.vosk.websocket_url=ws://localhost:2700
+ 
+ # Whisper live transcription server
+ # org.jitsi.jigasi.transcription.customService=org.jitsi.jigasi.transcription.WhisperTranscriptionService

patches/jitsi-meet/001-jitsi-meet-enable-livestreaming-and-recording.patch

@@ -0,0 +1,66 @@
+# Quick Jibri Installer - *buntu (LTS) based systems.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+Patch jitsi-meet config.js to enable recording and livestreaming by default.
+
+diff --git a/etc/jitsi/meet/${DOMAIN}-config.js b/etc/jitsi/meet/${DOMAIN}-config.js
+index dcb860b..8f64c7c 100644
+--- a/etc/jitsi/meet/${DOMAIN}-config.js
++++ b/etc/jitsi/meet/${DOMAIN}-config.js
+@@ -343,12 +343,12 @@ var config = {
+     //    // showPrejoinWarning: true,
+     // },
+ 
+-    // recordingService: {
++    recordingService: {
+     //     // When integrations like dropbox are enabled only that will be shown,
+     //     // by enabling fileRecordingsServiceEnabled, we show both the integrations
+     //     // and the generic recording service (its configuration and storage type
+     //     // depends on jibri configuration)
+-    //     enabled: false,
++        enabled: true,
+ 
+     //     // Whether to show the possibility to share file recording with other people
+     //     // (e.g. meeting participants), based on the actual implementation
+@@ -357,7 +357,7 @@ var config = {
+ 
+     //     // Hide the warning that says we only store the recording for 24 hours.
+     //     hideStorageWarning: false,
+-    // },
++    },
+ 
+     // DEPRECATED. Use recordingService.enabled instead.
+     // fileRecordingsServiceEnabled: false,
+@@ -368,7 +368,7 @@ var config = {
+     // Local recording configuration.
+     // localRecording: {
+     //     // Whether to disable local recording or not.
+-    //     disable: false,
++    //     disable: true,
+ 
+     //     // Whether to notify all participants when a participant is recording locally.
+     //     notifyAllParticipants: false,
+@@ -378,9 +378,9 @@ var config = {
+     // },
+ 
+     // Customize the Live Streaming dialog. Can be modified for a non-YouTube provider.
+-    // liveStreaming: {
++    liveStreaming: {
+     //    // Whether to enable live streaming or not.
+-    //    enabled: false,
++       enabled: true,
+     //    // Terms link
+     //    termsLink: 'https://www.youtube.com/t/terms',
+     //    // Data privacy link
+@@ -388,8 +388,8 @@ var config = {
+     //    // RegExp string that validates the stream key input field
+     //    validatorRegExpString: '^(?:[a-zA-Z0-9]{4}(?:-(?!$)|$)){4}',
+     //    // Documentation reference for the live streaming feature.
+-    //    helpLink: 'https://jitsi.org/live'
+-    // },
++       helpLink: 'https://forge.switnet.net/switnet/quick-jibri-installer'
++    },
+ 
+     // DEPRECATED. Use liveStreaming.enabled instead.
+     // liveStreamingEnabled: false,

patches/jitsi-meet/002-jitsi-meet-welcome-page-on-off.patch

@@ -0,0 +1,31 @@
+# Quick Jibri Installer - *buntu (LTS) based systems.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+Patch jitsi-meet config.js to enable/disable welcome page.
+
+diff --git a/etc/jitsi/meet/${DOMAIN}-config.js b/etc/jitsi/meet/${DOMAIN}-config.js
+index dcb860b..2094287 100644
+--- a/etc/jitsi/meet/${DOMAIN}-config.js
++++ b/etc/jitsi/meet/${DOMAIN}-config.js
+@@ -664,13 +664,13 @@ var config = {
+     // enableWelcomePage: true,
+ 
+     // Configs for welcome page.
+-    // welcomePage: {
+-    //     // Whether to disable welcome page. In case it's disabled a random room
+-    //     // will be joined when no room is specified.
+-    //     disabled: false,
+-    //     // If set, landing page will redirect to this URL.
+-    //     customUrl: ''
+-    // },
++    welcomePage: {
++        // Whether to disable welcome page. In case it's disabled a random room
++        // will be joined when no room is specified.
++        disabled: ${ENABLE_WELCP_BOL},
++        // If set, landing page will redirect to this URL.
++        customUrl: ''
++    },
+ 
+     // Configs for the lobby screen.
+     // lobby: {

quick_jibri_installer.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Quick Jibri Installer - *buntu (LTS) based systems.
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 {
 echo "Started at $(date +'%Y-%m-%d %H:%M:%S')" >> qj-installer.log
@@ -38,118 +38,126 @@ DIST=$(lsb_release -sc)
 GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list"
 GOOGLE_ACTIVE_REPO=$(apt-cache policy | awk '/chrome/{print$3}' | awk -F "/" 'NR==1{print$2}')
 PROSODY_REPO="$(apt-cache policy | awk '/prosody/{print$3}' | awk -F "/" 'NR==1{print$2}')"
-PUBLIC_IP="$(dig +short myip.opendns.com @resolver1.opendns.com)"
+PUBLIC_IP="$(dig -4 +short myip.opendns.com @resolver1.opendns.com)"
 NL="$(printf '\n  ')"
 NODEJS_VER="18"
+JITSI_GPG_KEY="/etc/apt/trusted.gpg.d/jitsi-key.gpg.key"
+PROSODY_GPG_KEY="/etc/apt/trusted.gpg.d/prosody-debian-packages.key"
+NODEJS_GPG_KEY="/etc/apt/keyrings/nodesource.gpg"
+TODAY=$(date +%s)
+NEXT_LTS_DATE=$(date -d 2024-04-01 +%s)
+CERT_CHOICE_DEBCONF="Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)"
 
 printwc() {
     printf "%b$2%b" "$1" "${Color_Off}"
 }
 exit_ifinstalled() {
-if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+	if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
-    echo "
+        echo -e "\nThis instance already has $1 installed, exiting..."
-This instance already has $1 installed, exiting...
+        echo -e "Please try again on a clean system."
-Please try again on a clean system.
+        echo -e " If you think this is an error, please report to:"
- If you think this is an error, please report to:
+        echo -e "  -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
-  -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
+		exit
-    exit
+	fi
-fi
 }
 exit_ifinstalled jitsi-meet
 
 rename_distro() {
-if [ "$DIST" = "$1" ]; then
+    if [ "$DIST" = "$1" ]; then
-  DIST="$2"
+        DIST="$2"
-fi
+    fi
 }
 #Trisquel distro upstream referencing.
 rename_distro nabia  focal
 rename_distro aramo  jammy
 
 install_ifnot() {
-if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+    if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
-    echo " $1 is installed, skipping..."
+        echo " $1 is installed, skipping..."
     else
         printf "\n---- Installing %s ----" "$1"
         apt-get -yq2 install "$1"
-fi
+    fi
 }
 check_serv() {
-if [ "$APACHE_2" -eq 1 ]; then
+    if [ "$APACHE_2" -eq 1 ]; then
-    echo "
+        echo -e "\nThe recommended setup is using NGINX, exiting...\n"
-The recommended setup is using NGINX, exiting...
+        exit
-"
+    elif [ "$NGINX" -eq 1 ]; then
-    exit
+    printf "\nWebserver already installed!\n"
-elif [ "$NGINX" -eq 1 ]; then
+    else
-
+        printf "\nInstalling nginx webserver!\n"
-printf "\nWebserver already installed!\n"
+        install_ifnot nginx
-
+    fi
-else
-    printf "\nInstalling nginx webserver!\n"
-    install_ifnot nginx
-fi
 }
 check_snd_driver() {
-printf "\n# Checking ALSA - Loopback module..."
+    printf "\n# Checking ALSA - Loopback module..."
-echo "snd-aloop" | tee -a /etc/modules
+    echo "snd-aloop" | tee -a /etc/modules
-modprobe snd-aloop
+    modprobe snd-aloop
-if [ "$(lsmod|awk '/snd_aloop/{print$1}'|awk 'NR==1')" = "snd_aloop" ]; then
+    if [ "$(lsmod|awk '/snd_aloop/{print$1}'|awk 'NR==1')" = "snd_aloop" ]; then
-    echo "
+        echo -e "\n#-----------------------------------------------------------------------"
-#-----------------------------------------------------------------------
+        echo "# Audio driver seems - OK."
-# Audio driver seems - OK.
+        echo -e "#-----------------------------------------------------------------------\n"
-#-----------------------------------------------------------------------"
+    else
-else
+        echo -e "\n#-----------------------------------------------------------------------"
-    echo "
+        echo "# Your audio driver might not be able to load."
-#-----------------------------------------------------------------------
+        echo "# We'll check the state of this Jibri with our 'test-jibri-env.sh' tool."
-# Your audio driver might not be able to load.
+        echo -e "#-----------------------------------------------------------------------\n"
-# We'll check the state of this Jibri with our 'test-jibri-env.sh' tool.
+        #Test tool
-#-----------------------------------------------------------------------"
+        if [ "$MODE" = "debug" ]; then
-#Test tool
+            bash "$PWD"/tools/test-jibri-env.sh -m debug
-  if [ "$MODE" = "debug" ]; then
+        else
-    bash "$PWD"/tools/test-jibri-env.sh -m debug
+            bash "$PWD"/tools/test-jibri-env.sh
-  else
+        fi
-    bash "$PWD"/tools/test-jibri-env.sh
+        read -n 1 -s -r -p "Press any key to continue..."$'\n'
-  fi
+    fi
-read -n 1 -s -r -p "Press any key to continue..."$'\n'
-fi
 }
 # sed limiters for add-jibri-node.sh variables
 var_dlim() {
     grep -n "$1" add-jibri-node.sh|head -n1|cut -d ":" -f1
 }
+add_gpg_keyring() {
+    apt-key adv --recv-keys --keyserver keyserver.ubuntu.com \$1
+    apt-key export \$1 | gpg --dearmour | tee /tmp/\$1.gpg >/dev/null
+    apt-key del \$1
+    mv /tmp/\$1.gpg /etc/apt/trusted.gpg.d/
+}
 add_prosody_repo() {
-echo "Add Prosody repo"
+    echo "Add Prosody repo"
-if [ "$PROSODY_REPO" = "main" ]; then
+    if [ "$PROSODY_REPO" = "main" ]; then
-    echo "Prosody repository already installed"
+        echo "Prosody repository already installed"
-else
+    else
-    echo "deb [signed-by=/etc/apt/trusted.gpg.d/prosody-debian-packages.key] http://packages.prosody.im/debian $(lsb_release -sc) main" > /etc/apt/sources.list.d/prosody.list
+        echo "deb [signed-by=$PROSODY_GPG_KEY] http://packages.prosody.im/debian $DIST main" \
-    curl -s https://prosody.im/files/prosody-debian-packages.key > /etc/apt/trusted.gpg.d/prosody-debian-packages.key
+            > /etc/apt/sources.list.d/prosody.list
-fi
+        curl -s https://prosody.im/files/prosody-debian-packages.key \
+            > "$PROSODY_GPG_KEY"
+        apt-get update -q2
+    fi
 }
 dpkg-compare() {
-dpkg --compare-versions "$(dpkg-query -f='${Version}' --show "$1")" "$2" "$3"
+    dpkg --compare-versions "$(dpkg-query -f='${Version}' --show "$1")" "$2" "$3"
 }
 wait_seconds() {
-secs=$(($1))
+    secs=$(($1))
-while [ $secs -gt 0 ]; do
+    while [ $secs -gt 0 ]; do
-   echo -ne "$secs\033[0K\r"
+       echo -ne "$secs\033[0K\r"
-   sleep 1
+       sleep 1
-   : $((secs--))
+       : $((secs--))
-done
+    done
 }
 print_title() {
-printwc "${Blue}" "\n#--------------------------------------------------"
+    printwc "${Blue}" "\n#--------------------------------------------------"
-printwc "${Blue}" "\n# $1"
+    printwc "${Blue}" "\n# $1"
-printwc "${Blue}" "\n#--------------------------------------------------\n"
+    printwc "${Blue}" "\n#--------------------------------------------------\n"
 }
 test_match() {
-if grep -q "$1" "$2" ; then
+    if grep -q "$1" "$2" ; then
-    echo "$(basename "$2") - OK..."
+        echo "$(basename "$2") - OK..."
-else
+    else
-    echo "$(basename "$2"), FAIL..."
+        echo "$(basename "$2"), FAIL..."
-    echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
+        echo "Please report this to https://forge.switnet.net/switnet/quick-jibri-installer"
-    exit
+        exit
-fi
+    fi
 }
 clear
 printwc "${Green}" '
@@ -170,7 +178,7 @@ Featuring:
 Learn more about these at,
 Main repository: https://forge.switnet.net/switnet/quick-jibri-installer
 Wiki and documentation: https://forge.switnet.net/switnet/quick-jibri-installer/wiki\n\n'
-
+sleep .1
 read -n 1 -s -r -p "Press any key to continue..."$'\n'
 
 #Check if user is root
@@ -188,13 +196,11 @@ else
     exit
 fi
 #Suggest 22.04 LTS release over 20.04 in April 2024
-TODAY=$(date +%s)
-NEXT_LTS_DATE=$(date -d 2024-04-01 +%s)
-
 if [ "$DIST" = "focal" ]; then
   if [ "$TODAY" -gt "$NEXT_LTS_DATE" ]; then
-    echo "  > $(lsb_release -sc), even when it's compatible and functional.
+    echo "  > $(lsb_release -sc), even when it's compatible and functional."
-    We suggest to use the next (LTS) release, for longer support and security reasons."
+    echo -n "    We suggest to use the next (LTS) release, for longer"
+    echo " support and security reasons."
     read -n 1 -s -r -p "Press any key to continue..."$'\n'
   else
     echo "Focal is supported."
@@ -204,7 +210,8 @@ fi
 #Check system resources
 printf "\n\nVerifying System Resources:"
 if [ "$(nproc --all)" -lt 4 ];then
-    printf "\nWarning!: The system do not meet the minimum CPU requirements for Jibri to run."
+    printf "\nWarning!: The system do not meet the minimum CPU"
+    printf " requirements for Jibri to run."
     printf "\n>> We recommend 4 cores/threads for Jibri!\n"
     CPU_MIN="N"
 else
@@ -215,7 +222,8 @@ sleep .1
 ### Test RAM size (8GB min) ###
 mem_available="$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')"
 if [ "$mem_available" -lt 7700000 ]; then
-    printf "\nWarning!: The system do not meet the minimum RAM requirements for Jibri to run."
+    printf "\nWarning!: The system do not meet the minimum RAM"
+    printf " requirements for Jibri to run."
     printf "\n>> We recommend 8GB RAM for Jibri!\n\n"
     MEM_MIN="N"
 else
@@ -227,8 +235,10 @@ if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then
     echo "All requirements seems meet!"
     printf "\n    - We hope you have a nice recording/streaming session\n"
 else
-    printf "CPU (%s)/RAM (%s MiB) does NOT meet minimum recommended requirements!" "$(nproc --all)" "$((mem_available/1024))"
+    printf "CPU (%s)/RAM (%s MiB)" "$(nproc --all)" "$((mem_available/1024))"
-    printf "\nEven when you can use the videoconferencing sessions, we advice to increase the resources in order to user Jibri.\n\n"
+    printf " does NOT meet minimum recommended requirements!"
+    printf "\nEven when you can use the videoconferencing sessions, we"
+    printf " advice to increase the resources in order to user Jibri.\n\n"
 sleep .1
     while [ "$CONTINUE_LOW_RES" != "yes" ] && [ "$CONTINUE_LOW_RES" != "no" ]
     do
@@ -238,7 +248,8 @@ sleep .1
             exit
     elif [ "$CONTINUE_LOW_RES" = "yes" ]; then
             printf "\n - We highly recommend to increase the server resources."
-            printf "\n - Otherwise, please think about adding dedicated jibri nodes instead.\n\n"
+            printf "\n - Otherwise, please think about adding dedicated"
+            printf " jibri nodes instead.\n\n"
     fi
     done
 fi
@@ -266,27 +277,32 @@ sleep .1
     do
     read -p "> Do you want to disable local jibri service?: (yes or no)$NL" -r DISABLE_LOCAL_JIBRI
         if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then
-            printf " - Please keep in mind that we might not support underpowered servers.\n"
+            printf " - Please keep in mind that we might not support"
+            printf " underpowered servers.\n"
         elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
-            printf " - You can add dedicated jibri nodes later, see more at the wiki.\n"
+            printf " - You can add dedicated jibri nodes later, see more"
+            printf " at the wiki.\n"
         fi
     done
 fi
 sleep .1
 #Check system oriented porpuse
-apt-get -yq2 update
+apt-get -q2 update
 SYSTEM_DE="$(apt-cache search "ubuntu-(desktop|mate-desktop)"|awk '{print$1}'|xargs|sed 's|$| trisquel triskel trisquel-mini|')"
 SYSTEM_DE_ARRAY=( "$SYSTEM_DE" )
 printf "\nChecking for common desktop system oriented purpose....\n"
 for de in "${SYSTEM_DE_ARRAY[@]}"
 do
     if [ "$(dpkg-query -W -f='${Status}' "$de" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
-        printf "\n > This instance has %s installed, exiting...
+        printf "\n > This instance has %s installed, exiting...\n" "$de"
-\nPlease avoid using this installer on a desktop-user oriented GNU/Linux system.
+        printf "\nPlease avoid using this installer on a desktop-user"
- This is an unsupported use, as it will likely BREAK YOUR SYSTEM, so please don't." "$de"
+        printf " oriented GNU/Linux system.\n"
+        printf "This is an unsupported use, as it will likely BREAK YOUR"
+        printf " SYSTEM, so please don't.\n"
         exit
     else
-        printf " > No standard desktop environment for user oriented porpuse detected, good!, continuing...\n\n"
+        printf " > No standard desktop environment for user oriented"
+        printf " porpuse detected, good!, continuing...\n\n"
     fi
 done
 sleep .1
@@ -298,8 +314,11 @@ printf "\nAdd Jitsi repo\n"
 if [ "$JITSI_REPO" = "stable" ]; then
     printf " - Jitsi stable repository already installed\n\n"
 else
-    echo 'deb [signed-by=/etc/apt/trusted.gpg.d/jitsi-key.gpg.key] http://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list
+    echo "deb [signed-by=$JITSI_GPG_KEY] http://download.jitsi.org stable/" \
-    curl -s https://download.jitsi.org/jitsi-key.gpg.key > /etc/apt/trusted.gpg.d/jitsi-key.gpg.key
+        > /etc/apt/sources.list.d/jitsi-stable.list
+    curl -s https://download.jitsi.org/jitsi-key.gpg.key \
+        > "$JITSI_GPG_KEY"
+    apt-get update -q2
     JITSI_REPO="stable"
 fi
 sleep .1
@@ -311,7 +330,8 @@ if [ "$LE_SSL" = yes ]; then
     printf " - We'll setup Let's Encrypt SSL certs.\n\n"
 else
     printf " - We'll let you choose later on for it."
-    printf "   Please be aware that a valid SSL cert is required for some features to work properly.\n\n"
+    printf "   Please be aware that a valid SSL cert is required for"
+    printf " some features to work properly.\n\n"
 fi
 done
 sleep .1
@@ -338,23 +358,26 @@ sleep .1
 sleep .1
   #Simple DNS test
     if [ "$PUBLIC_IP" = "$(dig -4 +short "$JITSI_DOMAIN"||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
-        printf "\nServer public IP  & DNS record for %s seems to match, continuing..." "$JITSI_DOMAIN"
+        printf "\nServer public IP  & DNS record for"
+        printf " %s seems to match, continuing..." "$JITSI_DOMAIN"
     else
-       echo "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN don't seem to match."
+        echo -n "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN"
-    echo "  > Please check your dns records are applied and updated, otherwise components may fail."
+        echo " don't seem to match."
-      read -p "  > Do you want to continue?: (yes or no)$NL" -r DNS_CONTINUE
+        echo -n "  > Please check your dns records are applied and updated,"
+        echo " otherwise components may fail."
+        read -p "  > Do you want to continue?: (yes or no)$NL" -r DNS_CONTINUE
         if [ "$DNS_CONTINUE" = "yes" ]; then
-          echo "  - We'll continue anyway..."
+            echo "  - We'll continue anyway..."
         else
-          echo "  - Exiting for now..."
+            echo "  - Exiting for now..."
-          exit
+            exit
         fi
     fi
 fi
 sleep .1
 # Requirements
-printf "\nWe'll start by installing system requirements this may take a while please be patient...\n"
+printf "\nWe'll start by installing system requirements this may take"
-apt-get update -q2
+printf " a while please be patient...\n"
 apt-get dist-upgrade -yq2
 
 apt-get -y install \
@@ -375,14 +398,15 @@ if [ "$LE_SSL" = "yes" ]; then
 apt-get -y install \
                 certbot
     if [ "$(dpkg-query -W -f='${Status}' ufw 2>/dev/null | grep -c "ok installed")" == "1"  ]; then
-        echo "# Disable pre-installed ufw, more on firewall see:
+        echo "# Disable pre-installed ufw, more on firewall see:"
-    > https://forge.switnet.net/switnet/quick-jibri-installer/wiki/Firewall"
+        echo "    > https://forge.switnet.net/switnet/quick-jibri-installer/wiki/Firewall"
         ufw disable
     fi
 fi
 
 echo "# Check and Install HWE kernel if possible..."
-HWE_VIR_MOD="$(apt-cache madison linux-image-generic-hwe-"$(lsb_release -sr)" 2>/dev/null|head -n1|grep -c "hwe-$(lsb_release -sr)")"
+HWE_VIR_MOD="$(apt-cache madison linux-image-generic-hwe-"$(lsb_release -sr)" \
+             2>/dev/null|head -n1|grep -c "hwe-$(lsb_release -sr)")"
 if [ "$HWE_VIR_MOD" = "1" ]; then
     apt-get -y install \
     linux-image-generic-hwe-"$(lsb_release -sr)" \
@@ -401,11 +425,15 @@ echo "
 #--------------------------------------------------
 "
 if [ "$LE_SSL" = "yes" ]; then
-echo "set jitsi-meet/cert-choice	select	Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)" | debconf-set-selections
+    echo "set jitsi-meet/cert-choice	select	$CERT_CHOICE_DEBCONF" \
-echo "jitsi-videobridge2	jitsi-videobridge/jvb-hostname	string	$JITSI_DOMAIN" | debconf-set-selections
+        | debconf-set-selections
-echo "jitsi-meet-web-config	jitsi-meet/email	string $SYSADMIN_EMAIL" | debconf-set-selections
+    echo "jitsi-videobridge2	jitsi-videobridge/jvb-hostname	string	$JITSI_DOMAIN" \
+        | debconf-set-selections
+    echo "jitsi-meet-web-config	jitsi-meet/email	string $SYSADMIN_EMAIL" \
+        | debconf-set-selections
 fi
-echo "jitsi-meet-web-config	jitsi-meet/jaas-choice	boolean	false"  | debconf-set-selections
+echo "jitsi-meet-web-config	jitsi-meet/jaas-choice	boolean	false" \
+        | debconf-set-selections
 apt-get -y install \
                 jitsi-meet \
                 jibri \
@@ -422,10 +450,11 @@ if [ "$(dpkg-query -W -f='${Status}' nodejs 2>/dev/null | grep -c "ok")" == "1"
     echo "Nodejs is installed, skipping..."
 else
     mkdir -p /etc/apt/keyrings
-    curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key | gpg --dearmor -o /etc/apt/keyrings/nodesource.gpg
+    curl -fsSL https://deb.nodesource.com/gpgkey/nodesource-repo.gpg.key \
-    echo "deb [signed-by=/etc/apt/keyrings/nodesource.gpg] https://deb.nodesource.com/node_$NODEJS_VER.x nodistro main" | \
+        | gpg --dearmor -o "$NODEJS_GPG_KEY"
-    tee /etc/apt/sources.list.d/nodesource.list
+    echo "deb [signed-by=$NODEJS_GPG_KEY] https://deb.nodesource.com/node_$NODEJS_VER.x nodistro main" | \
-    apt-get update -yq2
+        tee /etc/apt/sources.list.d/nodesource.list
+    apt-get update -q2
     apt-get install -yq2 nodejs
 
     echo "Installing nodejs esprima package..."
@@ -450,7 +479,7 @@ else
 fi
 apt-get -q2 update
 apt-get install -yq2 google-chrome-stable
-rm -rf /etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list
+rm -rf "$GOOGL_REPO"
 
 G_CHROME=$(apt-cache madison google-chrome-stable|awk '{print$3}'|cut -d. -f1-3)
 CHROMELAB_URL="https://googlechromelabs.github.io/chrome-for-testing"
@@ -509,19 +538,20 @@ JB_NAME="Jibri Sessions"
 LE_RENEW_LOG="/var/log/letsencrypt/renew.log"
 MOD_LISTU="https://prosody.im/files/mod_listusers.lua"
 MOD_LIST_FILE="/usr/lib/prosody/modules/mod_listusers.lua"
-ENABLE_SA="yes"
 MJS_RAND_TAIL="$(tr -dc "a-zA-Z0-9" < /dev/urandom | fold -w 4 | head -n1)"
 MJS_USER="jbsync_$MJS_RAND_TAIL"
 MJS_USER_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 32 | head -n1)"
 FQDN_HOST="fqdn"
 JIBRI_XORG_CONF="/etc/jitsi/jibri/xorg-video-dummy.conf"
 WS_MATCH1="# ensure all static content can always be found first"
+WS_MATCH2="external_api.js"
 MEET_MATCH1="disable simulcast support."
-#GC_SDK_REL_FILE="http://packages.cloud.google.com/apt/dists/cloud-sdk-$(lsb_release -sc)/Release"
+export DOMAIN
 
 # Make sure we can rely on the match strings.
 printf "> Testing match strings on config files.\n"
 test_match "$WS_MATCH1" "$WS_CONF"
+test_match "$WS_MATCH2" "$WS_CONF"
 test_match "$MEET_MATCH1" "$MEET_CONF"
 
 # Rename hostname for jitsi server
@@ -538,18 +568,6 @@ do
   fi
 done
 sleep .1
-#Language
-echo "## Setting up Jitsi Meet language ##
-You can define the language, for a complete list of the supported languages
-
-See here:
-https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json"
-printf "Jitsi Meet web interface will be set to use such language.\n\n"
-sleep .1
-read -p "Please set your language (Press enter to default to 'en'):$NL" -r JB_LANG
-sleep .1
-printf "\nWe'll take a minute to localize some UI excerpts if you need.\n\n"
-sleep .1
 #Participant
 printf "> Do you want to translate 'Participant' to your own language?\n"
 sleep .1
@@ -614,17 +632,20 @@ select opt in "${options[@]}"
 do
     case $opt in
         "Local")
-            printf "\n  > Users are created manually using prosodyctl, only moderators can open a room or launch recording.\n"
+            printf "\n  > Users are created manually using prosodyctl,"
+            printf " only moderators can open a room or launch recording.\n"
             ENABLE_SC="yes"
             break
             ;;
         "JWT")
-            printf "\n  > A external app manage the token usage/creation, like RocketChat does.\n"
+            printf "\n  > A external app manage the token usage/creation,"
+            printf " like RocketChat does.\n"
             ENABLE_JWT="yes"
             break
             ;;
         "None")
-            printf "\n  > Everyone can access the room as moderators as there is no auth mechanism.\n"
+            printf "\n  > Everyone can access the room as moderators as"
+            printf " there is no auth mechanism.\n"
             break
             ;;
         *) echo "Invalid option $REPLY, choose 1, 2 or 3";;
@@ -632,19 +653,22 @@ do
 done
 sleep .1
 # Set jibris default resolution
-printf "\n> What jibri resolution should be the default for this and all the following jibri nodes?\n"
+printf "\n> What jibri resolution should be the default for this and all"
+printf " the following jibri nodes?\n"
 PS3='The more resolution the more resources jibri will require to record properly: '
 jib_res=("HD 720" "FHD 1080")
 select res in "${jib_res[@]}"
 do
     case $res in
         "HD 720")
-            printf "\n  > HD (1280x720) is good enough for most cases, and requires a moderate high hw requirements.\n\n"
+            printf "\n  > HD (1280x720) is good enough for most cases,"
+            printf " and requires a moderate high hw requirements.\n\n"
             JIBRI_RES="720"
             break
             ;;
         "FHD 1080")
-            printf "\n  > Full HD (1920x1080) is the best resolution available, it also requires high hw requirements.\n\n"
+            printf "\n  > Full HD (1920x1080) is the best resolution"
+            printf " available, it also requires high hw requirements.\n\n"
             JIBRI_RES="1080"
             break
             ;;
@@ -676,24 +700,16 @@ do
 done
 sleep .1
 ##Jigasi
-#if [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "404" ]; then
+while [ "$ENABLE_TRANSCRIPT" != "yes" ] && [ "$ENABLE_TRANSCRIPT" != "no" ]
-    #printf "> Sorry Google SDK doesn't have support yet for %s,
+do
-    #thus, Jigasi Transcript can't be enable.\n\n" "$(lsb_release -sd)"
+    read -p "> Do you want to setup Jigasi Transcription: (yes or no)
-#elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200" ]; then
-    #while [ "$ENABLE_TRANSCRIPT" != "yes" ] && [ "$ENABLE_TRANSCRIPT" != "no" ]
-    #do
-        #read -p "> Do you want to setup Jigasi Transcription: (yes or no)
 #( Please check requirements at: https://forge.switnet.net/switnet/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
-        #if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
+    if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
-            #printf " - Jigasi Transcription won't be enabled.\n\n"
+        printf " - Jigasi Transcription won't be enabled.\n\n"
-        #elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
+    elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
-            #printf " - Jigasi Transcription will be enabled.\n\n"
+        printf " - Jigasi Transcription will be enabled.\n\n"
-        #fi
+    fi
-    #done
+done
-#else
-    #echo "No valid option for Jigasi. Please report this to
-#https://forge.switnet.net/switnet/quick-jibri-installer/issues"
-#fi
 sleep .1
 #Grafana
 while [ "$ENABLE_GRAFANA_DSH" != "yes" ] && [ "$ENABLE_GRAFANA_DSH" != "no" ]
@@ -837,23 +853,17 @@ BREWERY
 
 # Jibri tweaks for /etc/jitsi/meet/$DOMAIN-config.js
 sed -i "s|conference.$DOMAIN|internal.auth.$DOMAIN|" "$MEET_CONF"
-#New recording implementation.
-sed -i "s|// recordingService:|recordingService:|" "$MEET_CONF"
-sed -i "/recordingService/,/hideStorageWarning/s|//     enabled: false,|       enabled: true,|" "$MEET_CONF"
-sed -i "/hideStorageWarning: false/,/Local recording configuration/s|// },|},|" "$MEET_CONF"
-sed -i "s|// liveStreamingEnabled: false,|liveStreamingEnabled: true,\\
-\\
-    hiddenDomain: \'recorder.$DOMAIN\',|" "$MEET_CONF"
 
-#Setup main language
+#Enable recording & livestreaming by default.
-if [ -z "$JB_LANG" ] || [ "$JB_LANG" = "en" ]; then
+echo "> Patching config.js to enable recording and livestreaming by default..."
-    echo "Leaving English (en) as default language..."
+echo "  Read more about patches at the patches folder."
-    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: 'en',|" "$MEET_CONF"
+envsubst < \
-else
+  patches/jitsi-meet/001-jitsi-meet-enable-livestreaming-and-recording.patch | \
-    echo "Changing default language to: $JB_LANG"
+  patch --no-backup-if-mismatch -d / -p1
-    sed -i "s|// defaultLanguage: 'en',|defaultLanguage: \'$JB_LANG\',|" "$MEET_CONF"
-fi
 
+#Prepare hidden domain for jibri/jigasi silent users.
+sed -i "/fileRecordingsServiceEnabled: false,/a \\
+    hiddenDomain: \'recorder.$DOMAIN\'," "$MEET_CONF"
 # Recording directory
 if [ ! -d "$DIR_RECORD" ]; then
     mkdir "$DIR_RECORD"
@@ -872,8 +882,8 @@ echo "or storage provider, etc.) in this script" >> /tmp/finalize.out
 
 chmod -R 770 \$RECORDINGS_DIR
 
-LJF_PATH="\$(find \$RECORDINGS_DIR -exec stat --printf="%Y\t%n\n" {} \; | sort -n -r|awk '{print\$2}'| grep -v "meta\|-" | head -n1)"
+LJF_PATH="\$(find \$RECORDINGS_DIR -exec stat --printf="%Y\t%n\n" {} \; | sort -nr|sed 1d|awk '{print\$2}'| grep -v "meta\|_" | head -n1)"
-NJF_NAME="\$(find \$LJF_PATH |grep -e "-"|sed "s|\$LJF_PATH/||"|cut -d "." -f1)"
+NJF_NAME="\$(find \$LJF_PATH |grep "mp4"|sed "s|\$LJF_PATH/||"|cut -d "." -f1)"
 NJF_PATH="\$RECORDINGS_DIR/\$NJF_NAME"
 mv \$LJF_PATH \$NJF_PATH
 
@@ -884,117 +894,15 @@ chmod +x "$REC_DIR"
 
 ## New Jibri Config (2020)
 mv "$JIBRI_CONF" ${JIBRI_CONF}-dpkg-file
-cat << NEW_CONF > "$JIBRI_CONF"
+cp files/jibri.conf "$JIBRI_CONF"
-// New XMPP environment config.
+sed -i "s|JIBRI_RES_CONF|$JIBRI_RES_CONF|g" "$JIBRI_CONF"
-jibri {
+sed -i "s|DIR_RECORD|$DIR_RECORD|g" "$JIBRI_CONF"
-    streaming {
+sed -i "s|REC_DIR|$REC_DIR|g" "$JIBRI_CONF"
-        // A list of regex patterns for allowed RTMP URLs.  The RTMP URL used
+sed -i "s|JB_NAME|$JB_NAME|g" "$JIBRI_CONF"
-        // when starting a stream must match at least one of the patterns in
+sed -i "s|DOMAIN|$DOMAIN|g" "$JIBRI_CONF"
-        // this list.
+sed -i "s|JibriBrewery|$JibriBrewery|g" "$JIBRI_CONF"
-        rtmp-allow-list = [
+sed -i "s|JB_AUTH_PASS|$JB_AUTH_PASS|g" "$JIBRI_CONF"
-          // By default, all services are allowed
+sed -i "s|JB_REC_PASS|$JB_REC_PASS|g" "$JIBRI_CONF"
-          ".*"
-        ]
-    }
-    ffmpeg {
-        resolution = $JIBRI_RES_CONF
-    }
-    chrome {
-        // The flags which will be passed to chromium when launching
-        flags = [
-          "--use-fake-ui-for-media-stream",
-          "--start-maximized",
-          "--kiosk",
-          "--enabled",
-          "--disable-infobars",
-          "--autoplay-policy=no-user-gesture-required",
-          "--ignore-certificate-errors",
-          "--disable-dev-shm-usage"
-        ]
-    }
-    stats {
-        enable-stats-d = true
-    }
-    call-status-checks {
-        // If all clients have their audio and video muted and if Jibri does not
-        // detect any data stream (audio or video) comming in, it will stop
-        // recording after NO_MEDIA_TIMEOUT expires.
-        no-media-timeout = 30 seconds
-
-        // If all clients have their audio and video muted, Jibri consideres this
-        // as an empty call and stops the recording after ALL_MUTED_TIMEOUT expires.
-        all-muted-timeout = 10 minutes
-
-        // When detecting if a call is empty, Jibri takes into consideration for how
-        // long the call has been empty already. If it has been empty for more than
-        // DEFAULT_CALL_EMPTY_TIMEOUT, it will consider it empty and stop the recording.
-        default-call-empty-timeout = 30 seconds
-    }
-    recording {
-         recordings-directory = "$DIR_RECORD"
-         finalize-script = "$REC_DIR"
-    }
-    api {
-        xmpp {
-            environments = [
-                {
-                // A user-friendly name for this environment
-                name = "$JB_NAME"
-
-                // A list of XMPP server hosts to which we'll connect
-                xmpp-server-hosts = [ "$DOMAIN" ]
-
-                // The base XMPP domain
-                xmpp-domain = "$DOMAIN"
-
-                // The MUC we'll join to announce our presence for
-                // recording and streaming services
-                control-muc {
-                    domain = "internal.auth.$DOMAIN"
-                    room-name = "$JibriBrewery"
-                    nickname = "Live"
-                }
-
-                // The login information for the control MUC
-                control-login {
-                    domain = "auth.$DOMAIN"
-                    username = "jibri"
-                    password = "$JB_AUTH_PASS"
-                }
-
-                // An (optional) MUC configuration where we'll
-                // join to announce SIP gateway services
-            //    sip-control-muc {
-            //        domain = "domain"
-            //        room-name = "room-name"
-            //        nickname = "nickname"
-            //    }
-
-                // The login information the selenium web client will use
-                call-login {
-                    domain = "recorder.$DOMAIN"
-                    username = "recorder"
-                    password = "$JB_REC_PASS"
-                }
-
-                // The value we'll strip from the room JID domain to derive
-                // the call URL
-                strip-from-room-domain = "conference."
-
-                // How long Jibri sessions will be allowed to last before
-                // they are stopped.  A value of 0 allows them to go on
-                // indefinitely
-                usage-timeout = 0 hour
-
-                // Whether or not we'll automatically trust any cert on
-                // this XMPP domain
-                trust-all-xmpp-certs = true
-                }
-            ]
-        }
-    }
-}
-NEW_CONF
 
 #Jibri xorg resolution
 sed -i "s|[[:space:]]Virtual .*|Virtual $JIBRI_RES_XORG_CONF|" "$JIBRI_XORG_CONF"
@@ -1069,28 +977,6 @@ sed -i "s|MJS_USER=.*|MJS_USER=\"$MJS_USER\"|" add-jvb2-node.sh
 sed -i "s|MJS_USER_PASS=.*|MJS_USER_PASS=\"$MJS_USER_PASS\"|" add-jvb2-node.sh
 ##--
 
-#Tune webserver for Jitsi App control
-if [ -f "$WS_CONF" ]; then
-    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
-    sed -i "/$WS_MATCH1/i \ \ \ \ location = \/external_api.min.js {" "$WS_CONF"
-    sed -i "/$WS_MATCH1/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" "$WS_CONF"
-    sed -i "/$WS_MATCH1/i \ \ \ \ }" "$WS_CONF"
-    sed -i "/$WS_MATCH1/i \\\n" "$WS_CONF"
-    systemctl reload nginx
-else
-    echo "No app configuration done to server file, please report to:
-    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
-fi
-#Static avatar
-if [ "$ENABLE_SA" = "yes" ] && [ -f "$WS_CONF" ]; then
-    cp images/avatar2.png /usr/share/jitsi-meet/images/
-    sed -i "/location \/external_api.min.js/i \ \ \ \ location \~ \^\/avatar\/\(.\*\)\\\.png {" "$WS_CONF"
-    sed -i "/location \/external_api.min.js/i \ \ \ \ \ \ \ \ alias /usr/share/jitsi-meet/images/avatar2.png;" "$WS_CONF"
-    sed -i "/location \/external_api.min.js/i \ \ \ \ }\\
-\ " "$WS_CONF"
-    sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'https://$DOMAIN/avatar/\'|" "$INT_CONF"
-    sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" "$INT_CONF"
-fi
 #nginx -tlsv1/1.1
 if [ "$DROP_TLS1" = "yes" ];then
     printf "\nDropping TLSv1/1.1\n\n"
@@ -1098,8 +984,8 @@ if [ "$DROP_TLS1" = "yes" ];then
 elif [ "$DROP_TLS1" = "no" ];then
     printf "\nNo TLSv1/1.1 dropping was done.\n\n"
 else
-    echo "No condition meet, please report to
+    echo -n "No condition meet, please report to:"
-https://forge.switnet.net/switnet/quick-jibri-installer/issues "
+    echo "https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 sleep .1
 #================== Setup prosody conf file =================
@@ -1117,9 +1003,9 @@ if [ "$ENABLE_SC" = "yes" ]; then
     prosodyctl register "$SEC_ROOM_USER" "$DOMAIN" "$SEC_ROOM_PASS"
 sleep .1
     printf "\nSecure rooms are being enabled...\n"
-    echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
+    echo -n "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' "
-or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered.
+    echo "or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered."
-If you have issues with the password refer to your sysadmin."
+    echo "If you have issues with the password refer to your sysadmin."
     sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" "$JICOFO_SIP"
     sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
 fi
@@ -1158,20 +1044,23 @@ fi
 sed -i "s|// startWithVideoMuted: false,|startWithVideoMuted: true,|" "$MEET_CONF"
 
 #Start with audio muted but admin
-sed -i "s|// startAudioMuted: 10,|startAudioMuted: 1,|" "$MEET_CONF"
+sed -i "s|// startAudioMuted: 10,|startAudioMuted: 2,|" "$MEET_CONF"
 
 #Disable/enable welcome page
-if [ "$ENABLE_WELCP" = "yes" ]; then
+[ "$ENABLE_WELCP" = "yes" ] && ENABLE_WELCP_BOL=true
-    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: false,|" "$MEET_CONF"
+[ "$ENABLE_WELCP" = "no" ] && ENABLE_WELCP_BOL=false
-elif [ "$ENABLE_WELCP" = "no" ]; then
+export ENABLE_WELCP_BOL
-    sed -i "s|.*enableWelcomePage:.*|    enableWelcomePage: true,|" "$MEET_CONF"
+echo "> Patching config.js to modify welcompage behavior..."
-fi
+echo "  Read more about patches at the patches folder."
+envsubst < \
+  patches/jitsi-meet/002-jitsi-meet-welcome-page-on-off.patch | \
+  patch --no-backup-if-mismatch -d / -p1
+
 #Enable close page
-if [ "$ENABLE_CLOCP" = "yes" ]; then
+[ "$ENABLE_CLOCP" = "yes" ] && \
-    sed -i "s|.*enableClosePage:.*|    enableClosePage: true,|" "$MEET_CONF"
+    sed -i "s|// enableClosePage:.*|enableClosePage: true,|" "$MEET_CONF"
-elif [ "$ENABLE_CLOCP" = "no" ]; then
+[ "$ENABLE_CLOCP" = "no" ] && \
-    sed -i "s|.*enableClosePage:.*|    enableClosePage: false,|" "$MEET_CONF"
+    sed -i "s|// enableClosePage:.*|enableClosePage: false,|" "$MEET_CONF"
-fi
 
 #Add pre-join screen by default, since it improves YouTube autoplay capabilities
 #pre-join screen by itself don't require autorization by moderator, don't confuse with lobby which does.
@@ -1219,7 +1108,8 @@ if [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
     systemctl disable jibri
     systemctl disable jibri-xorg
     systemctl disable jibri-icewm
-# Manually apply permissions since finalize_recording.sh won't be triggered under this server options.
+    # Manually apply permissions since finalize_recording.sh won't be
+    # triggered under this server options.
     chmod -R 770 "$DIR_RECORD"
 fi
 
@@ -1258,8 +1148,9 @@ if [ -f "$WS_CONF" ]; then
     sed -i "/external_api.js/i \\\n" "$WS_CONF"
     systemctl reload nginx
 else
-    echo "No interface_config.js configuration done to server file, please report to:
+    printf "No interface_config.js configuration done to server file,"
-    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
+    printf " please report to:"
+    printf "    -> https://forge.switnet.net/switnet/quick-jibri-installer/issues"
 fi
 #JRA via Nextcloud
 if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
@@ -1271,7 +1162,16 @@ if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
     fi
 fi
 sleep .1
-
+#Jigasi w/VOSK backend.
+if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
+    printf "\nJigasi with VOSK backend will be enabled."
+    if [ "$MODE" = "debug" ]; then
+        bash "$PWD"/jigasi-vosk-backend.sh -m debug
+    else
+        bash "$PWD"/jigasi-vosk-backend.sh
+    fi
+fi
+sleep .1
 #Grafana Dashboard
 if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
     printf "\nGrafana Dashboard will be enabled."

tools/aws-grub-setup.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Automated AWS generic kernel setup for jibri.
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

tools/fail2ban_ssh.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Fail2ban configuration
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/jibri-conf-upgrade.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri conf updater
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/jibri-resolution-enhancer.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri resolution enhancer
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option

tools/prepare_php.sh

@@ -0,0 +1,138 @@
+#!/bin/bash
+# Automated PHP environment build for Nextcloud.
+# SwITNet Ltd © - 2024, https://switnet.net/
+# GPLv3 or later.
+
+PHPVER=$1
+STABLE_PHP="$(apt-cache madison php|grep -v ppa|awk -F'[:+]' 'NR==1{print $2}')"
+DISTRO_RELEASE="$(lsb_release -sc)"
+PHP_REPO="$(apt-cache policy | awk '/http/&&/php/{print$2}' | awk -F "/" 'NR==1{print$5}')"
+PHP_REPO_URL="http://ppa.launchpad.net/ondrej/php/ubuntu"
+PHP_FPM_DIR="/etc/php/$PHPVER/fpm"
+PHP_INI="$PHP_FPM_DIR/php.ini"
+PHP_CONF="/etc/php/$PHPVER/fpm/pool.d/www.conf"
+TMP_GPG_REPO="$(mktemp -d)"
+
+if [ $# -ne 1 ]; then
+  echo "Usage: $0 8.2"
+  exit 1
+fi
+
+install_ifnot() {
+    if [ "$(dpkg-query -W -f='${Status}' "$1" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
+        echo " $1 is installed, skipping..."
+    else
+        printf "\n---- Installing %s ----" "$1"
+        apt-get -yq2 install "$1"
+    fi
+}
+
+install_aval_package() {
+for i in $1
+  do
+     if [ -z "$(apt-cache madison "$i" 2>/dev/null)" ]; then
+     echo " > Package $i not available on repo."
+     else
+     echo " > Add package $i to the install list"
+     packages="$packages $i"
+     fi
+ done
+ echo "$packages"
+ apt-get -y install $packages #< don't quote.
+ packages=""
+}
+
+add_gpg_keyring() {
+apt-key adv --recv-keys --keyserver keyserver.ubuntu.com "$1"
+apt-key export "$1" | gpg --dearmour | tee "$TMP_GPG_REPO"/"$1".gpg >/dev/null
+apt-key del "$1"
+mv "$TMP_GPG_REPO"/"$1".gpg /etc/apt/trusted.gpg.d/
+}
+
+add_php_repo() {
+if [ "$PHP_REPO" = "php" ]; then
+    echo "PHP $PHPVER already installed"
+    apt-get -q2 update
+    apt-get -yq2 dist-upgrade
+else
+    echo "# Adding Ondrej PHP $PHPVER PPA Repository"
+    add_gpg_keyring E5267A6C
+    echo "deb [arch=amd64] $PHP_REPO_URL $DISTRO_RELEASE main" | \
+    tee /etc/apt/sources.list.d/php"$PHPVER".list
+    apt-get update -q2
+fi
+}
+
+add_php_repo
+
+install_aval_package " \
+            imagemagick \
+            php$PHPVER-fpm \
+            php$PHPVER-bcmath \
+            php$PHPVER-bz2 \
+            php$PHPVER-cli \
+            php$PHPVER-cgi \
+            php$PHPVER-curl \
+            php$PHPVER-gd \
+            php$PHPVER-gmp \
+            php$PHPVER-imagick \
+            php$PHPVER-intl \
+            php$PHPVER-json \
+            php$PHPVER-ldap \
+            php$PHPVER-mbstring \
+            php$PHPVER-pgsql \
+            php$PHPVER-redis \
+            php$PHPVER-soap \
+            php$PHPVER-xml \
+            php$PHPVER-xmlrpc \
+            php$PHPVER-zip \
+            redis-server \
+            unzip \
+            "
+
+#System related
+install_ifnot smbclient
+sed -i "s|.*env\[HOSTNAME\].*|env\[HOSTNAME\] = \$HOSTNAME|" "$PHP_CONF"
+sed -i "s|.*env\[PATH\].*|env\[PATH\] = /usr/local/bin:/usr/bin:/bin|" "$PHP_CONF"
+sed -i "s|.*env\[TMP\].*|env\[TMP\] = /tmp|" "$PHP_CONF"
+sed -i "s|.*env\[TMPDIR\].*|env\[TMPDIR\] = /tmp|" "$PHP_CONF"
+sed -i "s|.*env\[TEMP\].*|env\[TEMP\] = /tmp|" "$PHP_CONF"
+sed -i "s|;clear_env = no|clear_env = no|" "$PHP_CONF"
+
+echo "
+Tunning PHP.ini...
+"
+# Change values in php.ini (increase max file size)
+# max_execution_time
+sed -i "s|max_execution_time =.*|max_execution_time = 3500|g" "$PHP_INI"
+# max_input_time
+sed -i "s|max_input_time =.*|max_input_time = 3600|g" "$PHP_INI"
+# memory_limit
+sed -i "s|memory_limit =.*|memory_limit = 512M|g" "$PHP_INI"
+# post_max
+sed -i "s|post_max_size =.*|post_max_size = 1025M|g" "$PHP_INI"
+# upload_max
+sed -i "s|upload_max_filesize =.*|upload_max_filesize = 1024M|g" "$PHP_INI"
+
+phpenmod opcache
+{
+
+echo "# OPcache settings for Nextcloud"
+echo "opcache.enable=1"
+echo "opcache.enable_cli=1"
+echo "opcache.interned_strings_buffer=8"
+echo "opcache.max_accelerated_files=10000"
+echo "opcache.memory_consumption=256"
+echo "opcache.save_comments=1"
+echo "opcache.revalidate_freq=1"
+echo "opcache.validate_timestamps=1"
+} >> "$PHP_INI"
+
+update-alternatives --set php           /usr/bin/php"$STABLE_PHP"
+update-alternatives --set php-fpm.sock  /run/php/php"$STABLE_PHP"-fpm.sock
+update-alternatives --set php-cgi      	/usr/bin/php-cgi"$STABLE_PHP"
+update-alternatives --set php-cgi-bin   /usr/lib/cgi-bin/php"$STABLE_PHP"
+update-alternatives --set phar          /usr/bin/phar"$STABLE_PHP"
+update-alternatives --set phar.phar     /usr/bin/phar.phar"$STABLE_PHP"
+
+systemctl restart php"$PHPVER"-fpm.service

tools/start-over.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 #Start over
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GPLv3 or later.
 
 while getopts m: option

tools/test-jibri-env.sh

@@ -1,6 +1,6 @@
 #!/bin/bash
 # Simple Jibri Env tester
-# SwITNet Ltd © - 2023, https://switnet.net/
+# SwITNet Ltd © - 2024, https://switnet.net/
 # GNU GPLv3 or later.
 
 while getopts m: option