quick-jibri-installer/quick_jibri_installer.sh

1102 lines
36 KiB
Bash
Raw Normal View History

#!/bin/bash
2020-04-11 05:08:30 +00:00
# Quick Jibri Installer - *buntu (LTS) based systems.
2020-04-11 09:51:31 +00:00
# SwITNet Ltd © - 2020, https://switnet.net/
# GPLv3 or later.
2020-03-26 00:47:37 +00:00
{
echo "Started at $(date +'%Y-%m-%d %H:%M:%S')" >> qj-installer.log
while getopts m: option
do
case "${option}"
in
m) MODE=${OPTARG};;
\?) echo "Usage: sudo ./quick_jibri_installer.sh [-m debug]" && exit;;
esac
done
#DEBUG
if [ "$MODE" = "debug" ]; then
set -x
fi
# SYSTEM SETUP
2020-05-09 02:46:18 +00:00
JITSI_REPO=$(apt-cache policy | grep http | grep jitsi | grep stable | awk '{print $3}' | head -n 1 | cut -d "/" -f1)
APACHE_2=$(dpkg-query -W -f='${Status}' apache2 2>/dev/null | grep -c "ok installed")
NGINX=$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed")
DIST=$(lsb_release -sc)
GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list"
2020-05-03 00:21:53 +00:00
PROSODY_REPO=$(apt-cache policy | grep http | grep prosody| awk '{print $3}' | head -n 1 | cut -d "/" -f2)
2020-08-15 07:08:51 +00:00
CR=`echo $'\n> '`
if [ $DIST = flidas ]; then
DIST="xenial"
fi
2020-04-11 05:08:30 +00:00
if [ $DIST = etiona ]; then
DIST="bionic"
fi
2019-04-01 20:29:03 +00:00
install_ifnot() {
if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
echo " $1 is installed, skipping..."
else
echo -e "\n---- Installing $1 ----"
2020-04-14 16:49:11 +00:00
apt-get -yq2 install $1
2019-04-01 20:29:03 +00:00
fi
}
check_serv() {
if [ "$APACHE_2" -eq 1 ]; then
echo "
The recommended setup is using NGINX, exiting...
"
exit
elif [ "$NGINX" -eq 1 ]; then
2019-03-04 12:31:34 +00:00
2019-04-02 05:15:11 +00:00
echo "
Webserver already installed!
2019-04-02 05:15:11 +00:00
"
2019-03-04 12:31:34 +00:00
else
echo "
2020-04-14 03:24:05 +00:00
Installing nginx webserver!
"
2019-04-02 05:15:11 +00:00
install_ifnot nginx
fi
}
check_snd_driver() {
2020-10-07 18:19:20 +00:00
echo -e "\n# Checking ALSA - Loopback module..."
echo "snd-aloop" | tee -a /etc/modules
modprobe snd-aloop
if [ "$(lsmod | grep snd_aloop | head -n 1 | cut -d " " -f1)" = "snd_aloop" ]; then
2020-04-07 02:08:39 +00:00
echo "
#-----------------------------------------------------------------------
2020-04-11 05:08:30 +00:00
# Audio driver seems - OK.
#-----------------------------------------------------------------------"
else
2020-04-07 02:08:39 +00:00
echo "
#-----------------------------------------------------------------------
# Your audio driver might not be able to load.
# We'll check the state of this Jibri with our 'test-jibri-env.sh' tool.
#-----------------------------------------------------------------------"
#Test tool
if [ "$MODE" = "debug" ]; then
bash $PWD/tools/test-jibri-env.sh -m debug
else
bash $PWD/tools/test-jibri-env.sh
fi
2020-10-07 10:21:04 +00:00
read -n 1 -s -r -p "Press any key to continue..."$'\n'
fi
}
2020-05-09 02:46:18 +00:00
# sed limiters for add-jibri-node.sh variables
var_dlim() {
grep -n $1 add-jibri-node.sh|head -n1|cut -d ":" -f1
}
add_prosody_repo() {
echo "Add Prosody repo"
if [ "$PROSODY_REPO" = "main" ]; then
echo "Prosody repository already installed"
else
echo "deb http://packages.prosody.im/debian $(lsb_release -sc) main" > /etc/apt/sources.list.d/prosody.list
wget -qO - https://prosody.im/files/prosody-debian-packages.key | apt-key add -
fi
}
dpkg-compare() {
dpkg --compare-versions $(dpkg-query -f='${Version}' --show $1) $2 $3
}
2020-08-07 22:32:16 +00:00
wait_seconds() {
secs=$(($1))
while [ $secs -gt 0 ]; do
echo -ne "$secs\033[0K\r"
sleep 1
: $((secs--))
done
}
clear
2020-08-15 07:08:51 +00:00
echo -e '
########################################################################
Welcome to Jitsi/Jibri Installer
########################################################################
by Software, IT & Networks Ltd
2020-04-11 09:51:31 +00:00
Featuring:
2020-04-11 10:20:42 +00:00
- Jibri Recording and YouTube Streaming
2020-04-11 09:51:31 +00:00
- Jibri Recordings Access via Nextcloud
2020-04-30 19:43:37 +00:00
- Jigasi Transcription (Advanced)
2020-04-11 10:20:42 +00:00
- Customized brandless mode
2020-04-11 09:51:31 +00:00
- Recurring changes updater
2020-04-15 05:27:34 +00:00
Learn more about these at,
Main repository: https://github.com/switnet-ltd/quick-jibri-installer
2020-08-15 07:08:51 +00:00
Wiki and documentation: https://github.com/switnet-ltd/quick-jibri-installer/wiki\n' \
&& \
2020-04-15 05:34:29 +00:00
read -n 1 -s -r -p "Press any key to continue..."$'\n'
#Check if user is root
if ! [ $(id -u) = 0 ]; then
echo "You need to be root or have sudo privileges!"
exit 0
fi
if [ "$DIST" = "xenial" ] || \
[ "$DIST" = "bionic" ] || \
[ "$DIST" = "focal" ]; then
echo "OS: $(lsb_release -sd)"
echo "Good, this is a supported platform!"
2020-04-07 02:08:39 +00:00
else
echo "OS: $(lsb_release -sd)"
echo "Sorry, this platform is not supported... exiting"
2020-04-11 11:52:08 +00:00
exit
2020-04-07 02:08:39 +00:00
fi
#Suggest 18.04 LTS release over 16.04
2020-04-11 11:52:08 +00:00
if [ "$DIST" = "xenial" ]; then
2020-08-08 08:44:37 +00:00
echo " > $(lsb_release -sc), even when it's compatible and functional.
We suggest to use the next (LTS) release, for longer support and security reasons."
2020-04-15 05:34:29 +00:00
read -n 1 -s -r -p "Press any key to continue..."$'\n'
fi
#Check system resources
2020-06-29 07:45:17 +00:00
echo "Verifying System Resources:"
if [ "$(nproc --all)" -lt 4 ];then
2020-07-01 02:11:26 +00:00
echo "
2020-07-01 02:16:51 +00:00
Warning!: The system do not meet the minimum CPU requirements for Jibri to run.
2020-07-01 02:11:26 +00:00
>> We recommend 4 cores/threads for Jibri!
"
2020-06-29 07:45:17 +00:00
CPU_MIN="N"
else
echo "CPU Cores/Threads: OK ($(nproc --all))"
CPU_MIN="Y"
fi
### Test RAM size (8GB min) ###
mem_available=$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+')
if [ ${mem_available} -lt 7700000 ]; then
2020-07-01 02:11:26 +00:00
echo "
2020-07-01 02:16:51 +00:00
Warning!: The system do not meet the minimum RAM requirements for Jibri to run.
2020-07-01 02:11:26 +00:00
>> We recommend 8GB RAM for Jibri!
"
2020-06-29 07:45:17 +00:00
MEM_MIN="N"
else
echo "Memory: OK ($((mem_available/1024)) MiB)"
MEM_MIN="Y"
fi
2020-07-01 01:54:37 +00:00
if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then
2020-06-29 07:45:17 +00:00
echo "All requirements seems meet!"
2020-08-07 22:32:16 +00:00
echo "
- We hope you have a nice recording/streaming session
"
2020-06-29 07:45:17 +00:00
else
2020-07-01 02:07:22 +00:00
echo "CPU ($(nproc --all))/RAM ($((mem_available/1024)) MiB) does NOT meet minimum recommended requirements!"
2020-09-09 07:35:17 +00:00
echo "Even when you can use the videconference sessions, we advice to increase the resources in order to user Jibri."
2020-06-29 07:45:17 +00:00
while [[ "$CONTINUE_LOW_RES" != "yes" && "$CONTINUE_LOW_RES" != "no" ]]
do
read -p "> Do you want to continue?: (yes or no)"$'\n' -r CONTINUE_LOW_RES
if [ "$CONTINUE_LOW_RES" = "no" ]; then
echo "See you next time with more resources!..."
2020-06-29 19:26:03 +00:00
exit
2020-06-29 07:45:17 +00:00
elif [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo "We highly recommend to increase the server resources."
echo "Otherwise, please think about adding dedicated jibri nodes instead."
fi
done
fi
if [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo -e "\nThis server will likely have issues due the lack of resources.
If you plan to enable other components such as,
- JRA via Nextcloud
- Jigasi Transcriber
- Additional Jibri Nodes
- others.
We higly recommend to increase resources of this server.
For now we advice to disable the Jibri service locally and add an external
Jibri node once this installation has finished, using our script:
>> add-jibri-node.sh
So you can add a Jibri server on a instance with enough resources.\n"
while [[ "$DISABLE_LOCAL_JIBRI" != "yes" && "$DISABLE_LOCAL_JIBRI" != "no" ]]
do
read -p "> Do you want to disable local jibri service?: (yes or no)"$'\n' -r DISABLE_LOCAL_JIBRI
if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then
echo "Please keep in mind that we might not support underpowered servers."
exit
elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
echo "Please think about adding dedicated jibri nodes see more at the wiki."
2020-06-29 07:45:17 +00:00
fi
done
fi
2020-05-03 00:21:53 +00:00
#Prosody repository
add_prosody_repo
2020-08-08 06:37:50 +00:00
# Jitsi-Meet Repo
2020-08-07 22:32:16 +00:00
echo "
Add Jitsi repo
"
2020-08-08 06:13:10 +00:00
if [ "$JITSI_REPO" = "stable" ]; then
echo "Jitsi stable repository already installed"
else
2020-08-08 06:13:10 +00:00
echo 'deb http://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list
wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
2020-10-01 07:09:47 +00:00
JITSI_REPO="stable"
fi
#Default to LE SSL?
while [[ $LE_SSL != yes && $LE_SSL != no ]]
do
read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)"$'\n' -r LE_SSL
2020-04-30 22:23:13 +00:00
if [ $LE_SSL = yes ]; then
2020-07-20 09:56:46 +00:00
echo "We'll defaul to Let's Encrypt SSL certs."
2020-06-30 19:19:23 +00:00
else
echo "We'll let you choose later on for it."
fi
done
# Requirements
echo "We'll start by installing system requirements this may take a while please be patient..."
2020-04-14 16:49:11 +00:00
apt-get update -q2
apt-get dist-upgrade -yq2
2020-04-07 02:08:39 +00:00
2020-04-14 16:49:11 +00:00
apt-get -y install \
apt-show-versions \
bmon \
curl \
ffmpeg \
git \
htop \
jq \
2019-03-04 12:31:34 +00:00
letsencrypt \
net-tools \
2020-10-05 06:43:24 +00:00
rsync \
2020-10-05 11:41:22 +00:00
ssh \
unzip \
wget
2020-04-07 02:08:39 +00:00
echo "# Check and Install HWE kernel if possible..."
HWE_VIR_MOD=$(apt-cache madison linux-modules-extra-virtual-hwe-$(lsb_release -sr) 2>/dev/null|head -n1|grep -c "extra-virtual-hwe")
if [ "$HWE_VIR_MOD" == "1" ]; then
apt-get -y install \
linux-image-generic-hwe-$(lsb_release -sr) \
linux-modules-extra-virtual-hwe-$(lsb_release -sr)
else
apt-get -y install \
linux-modules-extra-$(uname -r)
fi
check_serv
echo "
#--------------------------------------------------
# Install Jitsi Framework
#--------------------------------------------------
"
if [ "$LE_SSL" = "yes" ]; then
2020-04-30 19:43:37 +00:00
echo "set jitsi-meet/cert-choice select Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)" | debconf-set-selections
fi
2020-04-14 16:49:11 +00:00
apt-get -y install \
jitsi-meet \
jibri \
openjdk-8-jre-headless
# Fix RAND_load_file error
#https://github.com/openssl/openssl/issues/7754#issuecomment-444063355
sed -i "/RANDFILE/d" /etc/ssl/openssl.cnf
echo "
#--------------------------------------------------
# Install NodeJS
#--------------------------------------------------
"
if [ "$(dpkg-query -W -f='${Status}' nodejs 2>/dev/null | grep -c "ok")" == "1" ]; then
echo "Nodejs is installed, skipping..."
else
2019-10-20 16:04:45 +00:00
curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash -
2020-04-14 16:49:11 +00:00
apt-get install -yq2 nodejs
echo "Installing nodejs esprima package..."
npm install -g esprima
fi
if [ "$(npm list -g esprima 2>/dev/null | grep -c "empty")" == "1" ]; then
echo "Installing nodejs esprima package..."
npm install -g esprima
elif [ "$(npm list -g esprima 2>/dev/null | grep -c "esprima")" == "1" ]; then
echo "Good. Esprima package is already installed"
fi
2019-02-25 04:10:26 +00:00
CHD_VER=$(curl -sL https://chromedriver.storage.googleapis.com/LATEST_RELEASE)
2020-04-07 02:08:39 +00:00
GCMP_JSON="/etc/opt/chrome/policies/managed/managed_policies.json"
echo "# Installing Google Chrome / ChromeDriver"
if [ -f $GOOGL_REPO ]; then
2020-04-11 10:38:36 +00:00
echo "Google repository already set."
else
2020-04-11 10:38:36 +00:00
echo "Installing Google Chrome Stable"
wget -q -O - https://dl.google.com/linux/linux_signing_key.pub | apt-key add -
echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee $GOOGL_REPO
fi
2020-04-14 16:49:11 +00:00
apt-get -q2 update
apt-get install -yq2 google-chrome-stable
rm -rf /etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list
if [ -f /usr/local/bin/chromedriver ]; then
echo "Chromedriver already installed."
else
echo "Installing Chromedriver"
2020-04-11 16:27:40 +00:00
wget -q https://chromedriver.storage.googleapis.com/$CHD_VER/chromedriver_linux64.zip -O /tmp/chromedriver_linux64.zip
unzip /tmp/chromedriver_linux64.zip -d /usr/local/bin/
chown root:root /usr/local/bin/chromedriver
chmod 0755 /usr/local/bin/chromedriver
rm -rf /tpm/chromedriver_linux64.zip
fi
2019-03-04 12:31:34 +00:00
echo "
Check Google Software Working...
"
/usr/bin/google-chrome --version
2019-03-04 12:31:34 +00:00
/usr/local/bin/chromedriver --version | awk '{print$1,$2}'
2020-04-07 02:08:39 +00:00
echo "
Remove Chrome warning...
"
mkdir -p /etc/opt/chrome/policies/managed
2020-04-15 05:34:29 +00:00
echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > $GCMP_JSON
2020-04-07 02:08:39 +00:00
echo '
########################################################################
2020-05-05 14:18:59 +00:00
Please Setup Your Installation
########################################################################
'
# MEET / JIBRI SETUP
2019-07-02 21:00:10 +00:00
DOMAIN=$(ls /etc/prosody/conf.d/ | grep -v localhost | awk -F'.cfg' '{print $1}' | awk '!NF || !seen[$0]++')
2020-04-11 05:08:30 +00:00
WS_CONF=/etc/nginx/sites-enabled/$DOMAIN.conf
2020-04-07 02:08:39 +00:00
JB_AUTH_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)"
JB_REC_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)"
PROSODY_FILE=/etc/prosody/conf.d/$DOMAIN.cfg.lua
2020-04-07 02:08:39 +00:00
PROSODY_SYS=/etc/prosody/prosody.cfg.lua
JICOFO_SIP=/etc/jitsi/jicofo/sip-communicator.properties
MEET_CONF=/etc/jitsi/meet/$DOMAIN-config.js
JIBRI_CONF=/etc/jitsi/jibri/jibri.conf
2020-04-07 02:08:39 +00:00
DIR_RECORD=/var/jbrecord
REC_DIR=/home/jibri/finalize_recording.sh
JB_NAME="Jibri Sessions"
2019-11-20 06:48:04 +00:00
LE_RENEW_LOG="/var/log/letsencrypt/renew.log"
2020-04-11 05:08:30 +00:00
MOD_LISTU="https://prosody.im/files/mod_listusers.lua"
MOD_LIST_FILE="/usr/lib/prosody/modules/mod_listusers.lua"
2020-04-30 19:43:37 +00:00
ENABLE_SA="yes"
2020-07-20 17:30:59 +00:00
CERTBOT_REPO=$(apt-cache policy | grep http | grep certbot | head -n 1 | awk '{print $2}' | cut -d "/" -f4)
CERTBOT_REL_FILE="http://ppa.launchpad.net/certbot/certbot/ubuntu/dists/$(lsb_release -sc)/Release"
GC_SDK_REL_FILE="http://packages.cloud.google.com/apt/dists/cloud-sdk-$(lsb_release -sc)/Release"
2020-10-05 21:11:06 +00:00
MJS_RAND_TAIL="$(tr -dc "a-zA-Z0-9" < /dev/urandom | fold -w 4 | head -n1)"
MJS_USER="jbsync_$MJS_RAND_TAIL"
MJS_USER_PASS="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 32 | head -n1)"
2020-08-08 06:37:50 +00:00
2020-10-05 08:45:01 +00:00
# Rename hostname for jitsi server
#hostnamectl set-hostname "jibri.${DOMAIN}"
#sed -i "1i ${PUBLIC_IP} jibri.${DOMAIN}" /etc/hosts
2020-07-04 16:48:58 +00:00
#Sysadmin email
while [[ -z $SYSADMIN_EMAIL ]]
do
read -p "Set sysadmin email (this is a mandatory field):"$'\n' -r SYSADMIN_EMAIL
done
2020-04-12 16:14:04 +00:00
#Language
echo "## Setting up Jitsi Meet language ##
2020-04-12 16:14:04 +00:00
You can define the language, for a complete list of the supported languages
2020-04-12 16:14:04 +00:00
See here:
https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json
Jitsi Meet web interface will be set to use such language.
"
2020-04-14 03:24:05 +00:00
read -p "Please set your language (Press enter to default to 'en'):"$'\n' -r LANG
2020-04-11 05:08:30 +00:00
#Drop unsecure TLS
while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]]
do
2020-04-11 19:19:12 +00:00
read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)"$'\n' -r DROP_TLS1
if [ "$DROP_TLS1" = "no" ]; then
echo "TLSv1.0/1.1 will remain."
elif [ "$DROP_TLS1" = "yes" ]; then
echo "TLSv1.0/1.1 will be dropped"
fi
2020-04-11 05:08:30 +00:00
done
#SSL LE
if [ "$LE_SSL" = "yes" ]; then
2020-06-30 19:19:23 +00:00
ENABLE_SSL=yes
else
while [[ "$ENABLE_SSL" != "yes" && "$ENABLE_SSL" != "no" ]]
do
read -p "> Do you want to setup LetsEncrypt with your domain: (yes or no)"$'\n' -r ENABLE_SSL
if [ "$ENABLE_SSL" = "no" ]; then
echo "Please run letsencrypt.sh manually post-installation."
2020-06-30 19:19:23 +00:00
else
echo "SSL will be enabled."
2020-06-03 11:36:51 +00:00
fi
done
fi
#Dropbox -- no longer requirement for localrecording
#while [[ $ENABLE_DB != yes && $ENABLE_DB != no ]]
#do
#read -p "> Do you want to setup the Dropbox feature now: (yes or no)"$'\n' -r ENABLE_DB
#if [ $ENABLE_DB = no ]; then
# echo "Dropbox won't be enable"
#elif [ $ENABLE_DB = yes ]; then
# read -p "Please set your Drobbox App key: "$'\n' -r DB_CID
#fi
#done
2020-04-11 09:59:29 +00:00
#Brandless Mode
while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]]
2020-04-11 09:59:29 +00:00
do
2020-04-11 19:19:12 +00:00
read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)"$'\n' -r ENABLE_BLESSM
if [ "$ENABLE_BLESSM" = "no" ]; then
2020-04-11 09:59:29 +00:00
echo "Brandless mode won't be set."
elif [ "$ENABLE_BLESSM" = "yes" ]; then
2020-04-11 09:59:29 +00:00
echo "Brandless mode will be set."
fi
done
echo -e "\nWe'll take a minute to localize some UI excerpts if you need.\n"
2020-04-12 16:14:04 +00:00
#Participant
2020-09-10 03:38:45 +00:00
echo -e "> Do you want to translate 'Participant' to your own language?" && \
2020-04-15 05:34:29 +00:00
read -p "Leave empty to use the default one (English): "$'\n' L10N_PARTICIPANT
2020-04-12 16:14:04 +00:00
#Me
2020-09-10 03:38:45 +00:00
echo -e "\n> Do you want to translate 'me' to your own language?
2020-04-12 16:14:04 +00:00
This must be a really small word to present one self.
Some suggestions might be: yo (Spanish) | je (French) | ich (German)\n" && \
2020-04-15 05:34:29 +00:00
read -p "Leave empty to use the default one (English): "$'\n' L10N_ME
2020-04-12 16:14:04 +00:00
#Welcome Page
while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]]
2019-07-29 09:24:32 +00:00
do
2020-04-12 16:14:04 +00:00
read -p "> Do you want to disable the Welcome page: (yes or no)"$'\n' -r ENABLE_WELCP
if [ "$ENABLE_WELCP" = "yes" ]; then
2020-04-12 16:14:04 +00:00
echo "Welcome page will be disabled."
elif [ "$ENABLE_WELCP" = "no" ]; then
2020-04-12 16:14:04 +00:00
echo "Welcome page will be enabled."
2019-07-29 09:24:32 +00:00
fi
done
2020-04-11 05:08:30 +00:00
#Enable static avatar
while [[ "$ENABLE_SA" != "yes" && "$ENABLE_SA" != "no" ]]
do
2020-05-01 01:32:59 +00:00
read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)"$'\n' -r ENABLE_SA
2020-04-11 05:08:30 +00:00
if [ "$ENABLE_SA" = "no" ]; then
echo "Static avatar won't be enabled"
2020-04-11 05:08:30 +00:00
elif [ "$ENABLE_SA" = "yes" ]; then
echo "Static avatar will be enabled"
fi
done
2020-08-11 07:46:31 +00:00
# #Enable local audio recording - disabling
#while [[ "$ENABLE_LAR" != "yes" && "$ENABLE_LAR" != "no" ]]
#do
#read -p "> Do you want to enable local audio recording option?: (yes or no)"$'\n' -r ENABLE_LAR
#if [ "$ENABLE_LAR" = "no" ]; then
# echo "Local audio recording option won't be enabled"
#elif [ "$ENABLE_LAR" = "yes" ]; then
# echo "Local audio recording option will be enabled"
#fi
#done
2020-04-11 05:08:30 +00:00
#Secure room initial user
while [[ "$ENABLE_SC" != "yes" && "$ENABLE_SC" != "no" ]]
do
2020-04-11 16:52:10 +00:00
read -p "> Do you want to enable secure rooms?: (yes or no)"$'\n' -r ENABLE_SC
2020-04-11 05:08:30 +00:00
if [ "$ENABLE_SC" = "no" ]; then
echo "-- Secure rooms won't be enabled."
elif [ "$ENABLE_SC" = "yes" ]; then
2020-04-11 21:35:50 +00:00
echo "-- Secure rooms will be enabled."
2020-04-11 05:08:30 +00:00
read -p "Set username for secure room moderator: "$'\n' -r SEC_ROOM_USER
2020-04-11 19:19:12 +00:00
read -p "Secure room moderator password: "$'\n' -r SEC_ROOM_PASS
2020-04-11 05:08:30 +00:00
fi
done
2020-04-12 16:14:04 +00:00
#Jibri Records Access (JRA) via Nextcloud
while [[ "$ENABLE_NC_ACCESS" != "yes" && "$ENABLE_NC_ACCESS" != "no" ]]
2020-04-11 05:08:30 +00:00
do
2020-04-16 01:38:31 +00:00
read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_NC_ACCESS
if [ "$ENABLE_NC_ACCESS" = "no" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- JRA via Nextcloud won't be enabled.\n"
elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- JRA via Nextcloud will be enabled.\n"
2020-04-12 16:14:04 +00:00
fi
done
#Jigasi
2020-07-20 17:30:59 +00:00
if [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "404" ]; then
2020-08-08 08:44:37 +00:00
echo "> Sorry Google SDK doesn't have support yet for $(lsb_release -sd),
2020-08-08 09:44:08 +00:00
thus, Jigasi Transcript can't be enable."
2020-07-20 17:30:59 +00:00
elif [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "200" ]; then
2020-07-20 18:04:46 +00:00
while [[ "$ENABLE_TRANSCRIPT" != "yes" && "$ENABLE_TRANSCRIPT" != "no" ]]
do
2020-04-16 01:38:31 +00:00
read -p "> Do you want to setup Jigasi Transcription: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_TRANSCRIPT
2020-07-20 18:04:46 +00:00
if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- Jigasi Transcription won't be enabled.\n"
2020-07-20 18:04:46 +00:00
elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- Jigasi Transcription will be enabled.\n"
2020-07-20 18:04:46 +00:00
fi
done
2020-07-20 17:30:59 +00:00
else
echo "No valid option for Jigasi. Please report this to
2020-07-20 17:30:59 +00:00
https://github.com/switnet-ltd/quick-jibri-installer/issues "
fi
#Grafana
while [[ "$ENABLE_GRAFANA_DSH" != "yes" && "$ENABLE_GRAFANA_DSH" != "no" ]]
do
read -p "> Do you want to setup Grafana Dashboard: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_GRAFANA_DSH
if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- Grafana Dashboard won't be enabled.\n"
elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
2020-08-11 08:20:44 +00:00
echo -e "-- Grafana Dashboard will be enabled. \n"
fi
done
#Docker Etherpad
2020-08-15 07:08:51 +00:00
#while [[ "$ENABLE_DOCKERPAD" != "yes" && "$ENABLE_DOCKERPAD" != "no" ]]
#do
#read -p "> Do you want to setup Docker Etherpad: (yes or no)
#( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_DOCKERPAD
#if [ "$ENABLE_DOCKERPAD" = "no" ]; then
# echo -e "-- Docker Etherpad won't be enabled.\n"
#elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then
# echo -e "-- Docker Etherpad will be enabled.\n"
#fi
#done
2020-04-11 05:08:30 +00:00
#Start configuration
echo '
########################################################################
Start Jitsi Framework configuration
########################################################################
'
JibriBrewery=JibriBrewery
2020-04-11 09:59:29 +00:00
INT_CONF="/usr/share/jitsi-meet/interface_config.js"
INT_CONF_ETC="/etc/jitsi/meet/$DOMAIN-interface_config.js"
WAN_IP=$(dig +short myip.opendns.com @resolver1.opendns.com)
2019-03-04 12:31:34 +00:00
ssl_wa() {
systemctl stop $1
2019-04-02 05:15:11 +00:00
letsencrypt certonly --standalone --renew-by-default --agree-tos --email $5 -d $6
sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" $4
sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" $4
systemctl restart $1
2019-03-04 12:31:34 +00:00
#Add cron
2020-04-13 18:39:25 +00:00
crontab -l | { cat; echo "@weekly certbot renew --${2} > $LE_RENEW_LOG 2>&1"; } | crontab -
2019-03-04 12:31:34 +00:00
crontab -l
}
enable_letsencrypt() {
if [ "$ENABLE_SSL" = "yes" ]; then
echo '
2020-04-11 05:08:30 +00:00
#--------------------------------------------------
# Starting LetsEncrypt configuration
#--------------------------------------------------
'
2019-03-04 12:31:34 +00:00
#Disabled 'til fixed upstream
#bash /usr/share/jitsi-meet/scripts/install-letsencrypt-cert.sh
echo "#Set and upgrade certbot PPA if posssible..."
if [ "$CERTBOT_REPO" = "certbot" ]; then
echo "
Cerbot repository already on the system!
Checking for updates...
"
apt-get -q2 update
apt-get -yq2 dist-upgrade
2020-07-20 17:30:59 +00:00
elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "200" ]; then
echo "
Adding cerbot (formerly letsencrypt) PPA repository for latest updates
"
echo "deb http://ppa.launchpad.net/certbot/certbot/ubuntu $DIST main" > /etc/apt/sources.list.d/certbot.list
apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 75BCA694
apt-get -q2 update
apt-get -yq2 dist-upgrade
2020-07-20 17:30:59 +00:00
elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "404" ]; then
echo "
Certbot PPA is not available for $(lsb_release -sc) just yet, it won't be installed...
"
fi
2019-03-04 12:31:34 +00:00
else
echo "SSL setup will be skipped."
fi
}
check_jibri() {
if [ "$(dpkg-query -W -f='${Status}' "jibri" 2>/dev/null | grep -c "ok installed")" == "1" ]
then
systemctl restart jibri
systemctl restart jibri-icewm
systemctl restart jibri-xorg
else
echo "Jibri service not installed"
fi
}
# Restarting services
restart_services() {
2020-04-13 17:46:47 +00:00
systemctl restart jitsi-videobridge2
systemctl restart jicofo
systemctl restart prosody
2019-02-25 04:10:26 +00:00
check_jibri
}
# Configure Jibri
## PROSODY
if dpkg-compare prosody lt 0.11.0 ; then
cat << MUC-JIBRI >> $PROSODY_FILE
-- internal muc component, meant to enable pools of jibri and jigasi clients
Component "internal.auth.$DOMAIN" "muc"
modules_enabled = {
"ping";
}
storage = "null"
muc_room_cache_size = 1000
MUC-JIBRI
fi
cat << REC-JIBRI >> $PROSODY_FILE
VirtualHost "recorder.$DOMAIN"
modules_enabled = {
"ping";
}
authentication = "internal_plain"
REC-JIBRI
#Enable Jibri withelist
2020-08-07 22:32:16 +00:00
sed -i "s| -- muc_lobby_whitelist| muc_lobby_whitelist|" $PROSODY_FILE
2020-04-07 02:08:39 +00:00
#Fix Jibri conectivity issues
2020-08-07 22:32:16 +00:00
#if dpkg-compare prosody lt 0.11.0 ; then
2020-04-07 02:08:39 +00:00
sed -i "s|c2s_require_encryption = .*|c2s_require_encryption = false|" $PROSODY_SYS
sed -i "/c2s_require_encryption = false/a \\
\\
consider_bosh_secure = true" $PROSODY_SYS
2020-08-07 22:32:16 +00:00
#fi
2020-04-12 16:14:04 +00:00
if [ ! -z $L10N_PARTICIPANT ]; then
sed -i "s|PART_USER=.*|PART_USER=\"$L10N_PARTICIPANT\"|" jm-bm.sh
2020-04-12 16:14:04 +00:00
fi
if [ ! -z $L10N_ME ]; then
2020-04-27 22:24:47 +00:00
sed -i "s|LOCAL_USER=.*|LOCAL_USER=\"$L10N_ME\"|" jm-bm.sh
2020-04-12 16:14:04 +00:00
fi
2020-04-11 05:08:30 +00:00
if [ ! -f $MOD_LIST_FILE ]; then
2020-04-07 02:08:39 +00:00
echo "
-> Adding external module to list prosody users...
"
2020-04-11 05:08:30 +00:00
curl -s $MOD_LISTU > $MOD_LIST_FILE
2020-04-07 02:08:39 +00:00
echo "Now you can check registered users with:
prosodyctl mod_listusers
"
else
echo "Prosody support for listing users seems to be enabled.
check with: prosodyctl mod_listusers
"
fi
### Prosody users
prosodyctl register jibri auth.$DOMAIN $JB_AUTH_PASS
prosodyctl register recorder recorder.$DOMAIN $JB_REC_PASS
## JICOFO
# /etc/jitsi/jicofo/sip-communicator.properties
cat << BREWERY >> $JICOFO_SIP
2019-04-05 06:14:57 +00:00
#org.jitsi.jicofo.auth.URL=XMPP:$DOMAIN
org.jitsi.jicofo.jibri.BREWERY=$JibriBrewery@internal.auth.$DOMAIN
org.jitsi.jicofo.jibri.PENDING_TIMEOUT=90
2019-04-01 20:29:03 +00:00
#org.jitsi.jicofo.auth.DISABLE_AUTOLOGIN=true
BREWERY
# Jibri tweaks for /etc/jitsi/meet/$DOMAIN-config.js
2019-02-25 04:10:26 +00:00
sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" $MEET_CONF
sed -i "s|conference.$DOMAIN|internal.auth.$DOMAIN|" $MEET_CONF
sed -i "s|// fileRecordingsEnabled: false,|fileRecordingsEnabled: true,| " $MEET_CONF
sed -i "s|// liveStreamingEnabled: false,|liveStreamingEnabled: true,\\
\\
hiddenDomain: \'recorder.$DOMAIN\',|" $MEET_CONF
#Dropbox feature
if [ "$ENABLE_DB" = "yes" ]; then
DB_STR=$(grep -n "dropbox:" $MEET_CONF | cut -d ":" -f1)
DB_END=$((DB_STR + 10))
sed -i "$DB_STR,$DB_END{s|// dropbox: {|dropbox: {|}" $MEET_CONF
sed -i "$DB_STR,$DB_END{s|// appKey: '<APP_KEY>'|appKey: \'$DB_CID\'|}" $MEET_CONF
sed -i "$DB_STR,$DB_END{s|// },|},|}" $MEET_CONF
fi
#LocalRecording
if [ "$ENABLE_LAR" = "yes" ]; then
2020-03-26 06:10:33 +00:00
echo "# Enabling local recording (audio only)."
LR_STR=$(grep -n "// Local Recording" $MEET_CONF | cut -d ":" -f1)
LR_END=$((LR_STR + 18))
sed -i "$LR_STR,$LR_END{s|// localRecording: {|localRecording: {|}" $MEET_CONF
sed -i "$LR_STR,$LR_END{s|// enabled: true,|enabled: true,|}" $MEET_CONF
sed -i "$LR_STR,$LR_END{s|// format: 'flac'|format: 'flac'|}" $MEET_CONF
sed -i "$LR_STR,$LR_END{s|// }|}|}" $MEET_CONF
sed -i "s|'tileview'|'tileview', 'localrecording'|" $INT_CONF
sed -i "s|LOC_REC=.*|LOC_REC=\"on\"|" jitsi-updater.sh
fi
#Setup main language
if [ -z $LANG ] || [ "$LANG" = "en" ]; then
echo "Leaving English (en) as default language..."
2019-11-20 07:38:52 +00:00
sed -i "s|// defaultLanguage: 'en',|defaultLanguage: 'en',|" $MEET_CONF
else
echo "Changing default language to: $LANG"
2019-11-20 07:38:52 +00:00
sed -i "s|// defaultLanguage: 'en',|defaultLanguage: \'$LANG\',|" $MEET_CONF
fi
#Check config file
echo "
# Checking $MEET_CONF file for errors
"
CHECKJS=$(esvalidate $MEET_CONF| cut -d ":" -f2)
if [[ -z "$CHECKJS" ]]; then
echo "
# The $MEET_CONF configuration seems correct. =)
"
else
echo "
Watch out!, there seems to be an issue on $MEET_CONF line:
$CHECKJS
Most of the times this is due upstream changes, please report to
https://github.com/switnet-ltd/quick-jibri-installer/issues
"
fi
# Recording directory
2020-04-30 19:43:37 +00:00
if [ ! -d $DIR_RECORD ]; then
2020-04-07 02:08:39 +00:00
mkdir $DIR_RECORD
2020-04-30 19:43:37 +00:00
fi
2020-04-07 02:08:39 +00:00
chown -R jibri:jibri $DIR_RECORD
cat << REC_DIR > $REC_DIR
#!/bin/bash
2020-04-07 02:08:39 +00:00
RECORDINGS_DIR=$DIR_RECORD
echo "This is a dummy finalize script" > /tmp/finalize.out
echo "The script was invoked with recordings directory $RECORDINGS_DIR." >> /tmp/finalize.out
echo "You should put any finalize logic (renaming, uploading to a service" >> /tmp/finalize.out
echo "or storage provider, etc.) in this script" >> /tmp/finalize.out
2020-04-07 02:08:39 +00:00
chmod -R 770 \$RECORDINGS_DIR
exit 0
REC_DIR
2020-04-07 02:08:39 +00:00
chown jibri:jibri $REC_DIR
chmod +x $REC_DIR
2020-10-01 07:09:47 +00:00
## New Jibri Config (2020)
mv $JIBRI_CONF ${JIBRI_CONF}-dpkg-file
cat << NEW_CONF > $JIBRI_CONF
// New XMPP environment config.
jibri {
recording {
recordings-directory = $DIR_RECORD
finalize-script = $REC_DIR
}
api {
xmpp {
environments = [
{
// A user-friendly name for this environment
name = "$JB_NAME"
// A list of XMPP server hosts to which we'll connect
xmpp-server-hosts = [ "$DOMAIN" ]
// The base XMPP domain
xmpp-domain = "$DOMAIN"
// The MUC we'll join to announce our presence for
// recording and streaming services
control-muc {
domain = "internal.auth.$DOMAIN"
room-name = "$JibriBrewery"
nickname = "Live"
}
// The login information for the control MUC
control-login {
domain = "auth.$DOMAIN"
username = "jibri"
password = "$JB_AUTH_PASS"
}
// An (optional) MUC configuration where we'll
// join to announce SIP gateway services
// sip-control-muc {
// domain = "domain"
// room-name = "room-name"
// nickname = "nickname"
// }
// The login information the selenium web client will use
call-login {
domain = "recorder.$DOMAIN"
username = "recorder"
password = "$JB_REC_PASS"
}
// The value we'll strip from the room JID domain to derive
// the call URL
strip-from-room-domain = "conference."
// How long Jibri sessions will be allowed to last before
// they are stopped. A value of 0 allows them to go on
// indefinitely
usage-timeout = 0 hour
// Whether or not we'll automatically trust any cert on
// this XMPP domain
trust-all-xmpp-certs = true
}
]
}
2020-10-01 07:09:47 +00:00
}
}
2020-10-01 07:09:47 +00:00
NEW_CONF
2020-10-05 21:11:06 +00:00
#Create receiver user
useradd -m -g jibri $MJS_USER
echo "$MJS_USER:$MJS_USER_PASS" | chpasswd
#Create ssh key and restrict connections
sudo su $MJS_USER -c "ssh-keygen -t rsa -f ~/.ssh/id_rsa -b 4096 -o -a 100 -q -N ''"
#Allow password authentication
sed -i "s|PasswordAuthentication .*|PasswordAuthentication yes|" /etc/ssh/sshd_config
systemctl restart sshd
2020-10-05 21:11:06 +00:00
#sudo su $MJS_USER -c "rm ~/.ssh/id_rsa.pub"
#sudo su $MJS_USER -c "cat ~/.ssh/authorized_keys"
2020-05-09 02:46:18 +00:00
#Setting varibales for add-jibri-node.sh
sed -i "s|MAIN_SRV_DIST=.*|MAIN_SRV_DIST=\"$DIST\"|" add-jibri-node.sh
sed -i "s|MAIN_SRV_REPO=.*|MAIN_SRV_REPO=\"$JITSI_REPO\"|" add-jibri-node.sh
sed -i "s|MAIN_SRV_DOMAIN=.*|MAIN_SRV_DOMAIN=\"$DOMAIN\"|" add-jibri-node.sh
sed -i "s|JB_NAME=.*|JB_NAME=\"$JB_NAME\"|" add-jibri-node.sh
sed -i "s|JibriBrewery=.*|JibriBrewery=\"$JibriBrewery\"|" add-jibri-node.sh
sed -i "s|JB_AUTH_PASS=.*|JB_AUTH_PASS=\"$JB_AUTH_PASS\"|" add-jibri-node.sh
sed -i "s|JB_REC_PASS=.*|JB_REC_PASS=\"$JB_REC_PASS\"|" add-jibri-node.sh
2020-10-05 21:11:06 +00:00
sed -i "s|MJS_USER=.*|MJS_USER=\"$MJS_USER\"|" add-jibri-node.sh
sed -i "s|MJS_USER_PASS=.*|MJS_USER_PASS=\"$MJS_USER_PASS\"|" add-jibri-node.sh
2020-05-09 02:46:18 +00:00
sed -i "$(var_dlim 0_LAST),$(var_dlim 1_LAST){s|LETS: .*|LETS: $(date -R)|}" add-jibri-node.sh
echo "Last file edition at: $(grep "LETS:" add-jibri-node.sh|head -n1|awk -F'LETS:' '{print$2}')"
2019-02-25 04:10:26 +00:00
#Tune webserver for Jitsi App control
2020-04-11 05:08:30 +00:00
if [ -f $WS_CONF ]; then
sed -i "/Anything that didn't match above/i \\\n" $WS_CONF
sed -i "/Anything that didn't match above/i \ \ \ \ location = \/external_api.min.js {" $WS_CONF
sed -i "/Anything that didn't match above/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" $WS_CONF
sed -i "/Anything that didn't match above/i \ \ \ \ }" $WS_CONF
sed -i "/Anything that didn't match above/i \\\n" $WS_CONF
systemctl reload nginx
else
echo "No app configuration done to server file, please report to:
-> https://github.com/switnet-ltd/quick-jibri-installer/issues"
fi
2020-04-11 05:08:30 +00:00
#Static avatar
if [ "$ENABLE_SA" = "yes" ] && [ -f $WS_CONF ]; then
#wget https://switnet.net/static/avatar.png -O /usr/share/jitsi-meet/images/avatar2.png
cp images/avatar2.png /usr/share/jitsi-meet/images/
2020-04-11 05:08:30 +00:00
sed -i "/location \/external_api.min.js/i \ \ \ \ location \~ \^\/avatar\/\(.\*\)\\\.png {" $WS_CONF
sed -i "/location \/external_api.min.js/i \ \ \ \ \ \ \ \ alias /usr/share/jitsi-meet/images/avatar2.png;" $WS_CONF
sed -i "/location \/external_api.min.js/i \ \ \ \ }\\
2019-02-25 04:10:26 +00:00
\ " $WS_CONF
2019-04-05 06:14:57 +00:00
sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'https://$DOMAIN/avatar/\'|" $INT_CONF
2019-02-25 04:10:26 +00:00
sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" $INT_CONF
fi
2020-04-11 05:08:30 +00:00
#nginx -tlsv1/1.1
2020-08-08 08:44:37 +00:00
if [ "$DROP_TLS1" = "yes" ] && [ "$DIST" != "xenial" ];then
echo "Dropping TLSv1/1.1 in favor of v1.3"
2020-04-11 05:08:30 +00:00
sed -i "s|TLSv1 TLSv1.1|TLSv1.3|" /etc/nginx/nginx.conf
#sed -i "s|TLSv1 TLSv1.1|TLSv1.3|" $WS_CONF
2020-08-07 23:10:52 +00:00
elif [ "$DROP_TLS1" = "yes" ] && [ "$DIST" = "xenial" ];then
echo "Only dropping TLSv1/1.1"
2020-04-11 05:08:30 +00:00
sed -i "s|TLSv1 TLSv1.1||" /etc/nginx/nginx.conf
sed -i "s| TLSv1.3||" $WS_CONF
elif [ "$DROP_TLS1" = "no" ];then
echo "No TLSv1/1.1 dropping was done."
2020-04-11 05:08:30 +00:00
else
echo "No contidion meet, please report to
2020-04-11 05:08:30 +00:00
https://github.com/switnet-ltd/quick-jibri-installer/issues "
fi
echo "Disable \"Blur my background\" until new notice"
sed -i "s|'videobackgroundblur', ||" $INT_CONF
2020-09-05 20:22:37 +00:00
#================== Setup prosody conf file =================
2020-04-11 05:08:30 +00:00
#Setup secure rooms
2020-05-01 01:32:59 +00:00
SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" $PROSODY_FILE | head -n1 | cut -d ":" -f1)
SRP_END=$((SRP_STR + 10))
sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_plain\"|}" $PROSODY_FILE
if dpkg-compare prosody gt 0.11.0 ; then
2020-08-07 22:32:16 +00:00
cat << P_SR >> $PROSODY_FILE
2019-04-05 06:14:57 +00:00
VirtualHost "guest.$DOMAIN"
authentication = "anonymous"
c2s_require_encryption = false
2020-05-01 01:32:59 +00:00
speakerstats_component = "speakerstats.$DOMAIN"
conference_duration_component = "conferenceduration.$DOMAIN"
2020-08-08 05:36:08 +00:00
lobby_muc = "lobby.$DOMAIN"
main_muc = "conference.$DOMAIN"
muc_lobby_whitelist = { "recorder.$DOMAIN", "auth.$DOMAIN" }
2020-09-05 20:22:37 +00:00
modules_enabled = {
"speakerstats";
"conference_duration";
"muc_lobby_rooms";
}
2020-08-08 05:36:08 +00:00
P_SR
else
2020-08-07 22:32:16 +00:00
cat << P_SR >> $PROSODY_FILE
VirtualHost "guest.$DOMAIN"
authentication = "anonymous"
2019-04-05 06:14:57 +00:00
c2s_require_encryption = false
P_SR
2020-08-07 22:32:16 +00:00
fi
2020-08-07 22:32:16 +00:00
#======================
2019-04-01 20:29:03 +00:00
#Secure room initial user
2020-04-11 05:08:30 +00:00
if [ "$ENABLE_SC" = "yes" ]; then
echo "Secure rooms are being enabled..."
2019-04-01 20:29:03 +00:00
echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \
or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered.
If you have issues with the password refer to your sysadmin."
2019-04-05 06:14:57 +00:00
sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" $JICOFO_SIP
2019-04-01 20:29:03 +00:00
prosodyctl register $SEC_ROOM_USER $DOMAIN $SEC_ROOM_PASS
2020-04-13 17:46:47 +00:00
sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh
fi
2019-02-25 04:10:26 +00:00
#Start with video muted by default
sed -i "s|// startWithVideoMuted: false,|startWithVideoMuted: true,|" $MEET_CONF
#Start with audio muted but admin
sed -i "s|// startAudioMuted: 10,|startAudioMuted: 1,|" $MEET_CONF
2019-03-04 12:31:34 +00:00
#Disable/enable welcome page
if [ "$ENABLE_WELCP" = "yes" ]; then
2020-04-02 20:47:24 +00:00
sed -i "s|.*enableWelcomePage:.*| enableWelcomePage: false,|" $MEET_CONF
elif [ "$ENABLE_WELCP" = "no" ]; then
2020-04-02 20:47:24 +00:00
sed -i "s|.*enableWelcomePage:.*| enableWelcomePage: true,|" $MEET_CONF
2019-11-20 07:29:46 +00:00
fi
2019-03-04 12:31:34 +00:00
#Set displayname as not required since jibri can't set it up.
sed -i "s|// requireDisplayName: true,|requireDisplayName: false,|" $MEET_CONF
2019-02-25 06:15:25 +00:00
#Enable jibri services
systemctl enable jibri
systemctl enable jibri-xorg
systemctl enable jibri-icewm
restart_services
if [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
systemctl stop jibri*
systemctl disable jibri*
fi
enable_letsencrypt
2020-08-08 05:36:08 +00:00
if dpkg-compare prosody gt 0.11.0 && [ "$ENABLE_SC" = "yes" ]; then
2020-09-10 04:03:53 +00:00
echo "Waiting prosody restart, wait 15s..."
2020-08-07 22:32:16 +00:00
wait_seconds 15
#Move mucs when using secure rooms - https://community.jitsi.org/t/27752/112
2020-08-07 22:32:16 +00:00
sed -i "s| lobby_muc = \"lobby.|-- lobby_muc = \"lobby.|" $PROSODY_FILE
2020-08-08 06:13:10 +00:00
sed -i "s| main_muc = \"conference.|-- main_muc = \"conference.|" $PROSODY_FILE
sed -i "s| muc_lobby_whitelist = { \"recorder.|-- muc_lobby_whitelist = { \"recorder.|" $PROSODY_FILE
2020-08-07 22:32:16 +00:00
#EO_TF
fi
# Fix prosody not able to read SSL Certs
chown -R root:prosody /etc/prosody/certs/
chmod -R 650 /etc/prosody/certs/
2019-04-02 05:15:11 +00:00
#SSL workaround
if [ "$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed")" -eq 1 ]; then
2019-04-05 06:14:57 +00:00
ssl_wa nginx nginx $DOMAIN $WS_CONF $SYSADMIN_EMAIL $DOMAIN
install_ifnot python3-certbot-nginx
2019-04-02 05:15:11 +00:00
else
2019-04-05 06:14:57 +00:00
echo "No webserver found please report."
2019-04-02 05:15:11 +00:00
fi
2020-04-11 09:59:29 +00:00
#Brandless Mode
if [ "$ENABLE_BLESSM" = "yes" ]; then
2020-04-11 12:46:24 +00:00
echo "Custom brandless mode will be enabled."
2020-04-11 09:59:29 +00:00
sed -i "s|ENABLE_BLESSM=.*|ENABLE_BLESSM=\"on\"|" jitsi-updater.sh
bash $PWD/jm-bm.sh
fi
# Applying best practives for interface config.js
2020-09-10 03:38:45 +00:00
echo -e "\n> Setting up custom interface_config.js according to best practices."
cp "$INT_CONF" "$INT_CONF_ETC"
#Tune webserver for interface_config.js
if [ -f $WS_CONF ]; then
sed -i "/external_api.js/i \\\n" $WS_CONF
sed -i "/external_api.js/i \ \ \ \ location = \/interface_config.js {" $WS_CONF
sed -i "/external_api.js/i \ \ \ \ \ \ \ \ alias \/etc\/jitsi\/meet\/$DOMAIN-interface_config.js;" $WS_CONF
sed -i "/external_api.js/i \ \ \ \ }" $WS_CONF
sed -i "/external_api.js/i \\\n" $WS_CONF
systemctl reload nginx
else
echo "No interface_config.js configuration done to server file, please report to:
-> https://github.com/switnet-ltd/quick-jibri-installer/issues"
fi
#JRA via Nextcloud
if [ "$ENABLE_NC_ACCESS" = "yes" ]; then
echo -n "\nJRA via Nextcloud will be enabled."
2020-09-30 08:14:08 +00:00
if [ "$MODE" = "debug" ]; then
bash $PWD/jra_nextcloud.sh -m debug
else
bash $PWD/jra_nextcloud.sh
fi
fi
} > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2)
#Jigasi Transcript
if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
echo -e "\nJigasi Transcription will be enabled."
2020-09-30 08:14:08 +00:00
# ToDo: Analyze behavior on debug
#if [ "$MODE" = "debug" ]; then
# bash $PWD/jigasi.sh -m debug
#else
bash $PWD/jigasi.sh
#fi
2019-07-29 09:24:32 +00:00
fi
{
#Grafana Dashboard
if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
echo -e "\nGrafana Dashboard will be enabled."
2020-09-30 08:14:08 +00:00
if [ "$MODE" = "debug" ]; then
bash $PWD/grafana.sh -m debug
else
bash $PWD/grafana.sh
fi
fi
#Docker Etherpad
if [ "$ENABLE_DOCKERPAD" = "yes" ]; then
echo -e "\nDocker Etherpad will be enabled."
2020-09-30 08:14:08 +00:00
if [ "$MODE" = "debug" ]; then
bash $PWD/etherpad.sh -m debug
else
bash $PWD/etherpad.sh
fi
fi
2020-04-07 02:08:39 +00:00
#Prevent Jibri conecction issue
2020-08-07 22:32:16 +00:00
if [ -z "$(grep -n $DOMAIN /etc/hosts)" ];then
2020-04-07 02:08:39 +00:00
sed -i "/127.0.0.1/a \\
127.0.0.1 $DOMAIN" /etc/hosts
2020-08-07 22:32:16 +00:00
else
echo "Local host already in place..."
fi
2020-04-07 02:08:39 +00:00
check_snd_driver
echo "
########################################################################
Installation complete!!
for customized support: http://switnet.net
########################################################################
"
2020-04-14 16:49:11 +00:00
apt-get -y autoremove
apt-get autoclean
echo "Rebooting in..."
2020-08-07 22:32:16 +00:00
wait_seconds 15
2020-03-26 00:47:37 +00:00
} > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2)
reboot