quick-jibri-installer/jra_nextcloud.sh

472 lines
16 KiB
Bash
Raw Normal View History

#!/bin/bash
2020-04-11 07:57:28 +00:00
# JRA (Jibri Recordings Access) via Nextcloud
# SwITNet Ltd © - 2020, https://switnet.net/
# GPLv3 or later.
2020-09-30 02:27:13 +00:00
while getopts m: option
do
case "${option}"
in
m) MODE=${OPTARG};;
\?) echo "Usage: sudo ./jra_nextcloud.sh [-m debug]" && exit;;
esac
done
#DEBUG
if [ "$MODE" = "debug" ]; then
set -x
fi
if ! [ $(id -u) = 0 ]; then
echo "You need to be root or have sudo privileges!"
exit 0
fi
clear
2020-10-05 08:19:03 +00:00
echo -e '\n
########################################################################
Jibri Recordings Access via Nextcloud
########################################################################
by Software, IT & Networks Ltd
2020-10-05 08:19:03 +00:00
\n'
2020-06-03 07:46:08 +00:00
while [[ -z "$NC_DOMAIN" ]]
do
read -p "Please enter the domain to use for Nextcloud: " -r NC_DOMAIN
2020-06-03 07:46:08 +00:00
if [ -z "$NC_DOMAIN" ]; then
echo "-- This field is mandatory."
fi
done
while [[ -z "$NC_USER" ]]
do
read -p "Nextcloud user: " -r NC_USER
2020-06-03 07:46:08 +00:00
if [ -z "$NC_USER" ]; then
echo "-- This field is mandatory."
fi
done
while [ -z "$NC_PASS" ] || [ ${#NC_PASS} -lt 6 ]
2020-06-03 07:46:08 +00:00
do
read -p "Nextcloud user password: " -r NC_PASS
if [ -z "$NC_PASS" ] || [ ${#NC_PASS} -lt 6 ]; then
echo -e "-- This field is mandatory. \nPlease make sure it's at least 6 caracters.\n"
2020-06-03 07:46:08 +00:00
fi
done
#Enable HSTS
while [[ "$ENABLE_HSTS" != "yes" && "$ENABLE_HSTS" != "no" ]]
do
read -p "> Do you want to enable HSTS for this domain?: (yes or no)
Be aware this option apply mid-term effects on the domain, choose \"no\"
in case you don't know what you are doing. More at https://hstspreload.org/"$'\n' -r ENABLE_HSTS
if [ "$ENABLE_HSTS" = "no" ]; then
echo "-- HSTS won't be enabled."
elif [ "$ENABLE_HSTS" = "yes" ]; then
echo "-- HSTS will be enabled."
fi
done
DISTRO_RELEASE="$(lsb_release -sc)"
DOMAIN=$(ls /etc/prosody/conf.d/ | grep -v localhost | awk -F'.cfg' '{print $1}' | awk '!NF || !seen[$0]++')
PHP_REPO=$(apt-cache policy | grep http | grep php | head -n 1 | awk '{print $2}' | cut -d "/" -f5)
PHPVER="7.4"
PSGVER="$(apt-cache madison postgresql | head -n1 | awk '{print $3}' | cut -d "+" -f1)"
PHP_FPM_DIR="/etc/php/$PHPVER/fpm"
PHP_INI="$PHP_FPM_DIR/php.ini"
PHP_CONF="/etc/php/$PHPVER/fpm/pool.d/www.conf"
NC_NGINX_CONF="/etc/nginx/sites-available/$NC_DOMAIN.conf"
NC_NGINX_SSL_PORT="$(grep "listen 44" /etc/nginx/sites-enabled/$DOMAIN.conf | awk '{print$2}')"
NC_REPO="https://download.nextcloud.com/server/releases"
NCVERSION="$(curl -s -m 900 $NC_REPO/ | sed --silent 's/.*href="nextcloud-\([^"]\+\).zip.asc".*/\1/p' | sort --version-sort | tail -1)"
STABLEVERSION="nextcloud-$NCVERSION"
NC_PATH="/var/www/nextcloud"
NC_CONFIG="$NC_PATH/config/config.php"
NC_DB_USER="nextcloud_user"
NC_DB="nextcloud_db"
NC_DB_PASSWD="$(tr -dc "a-zA-Z0-9#_*=" < /dev/urandom | fold -w 14 | head -n1)"
DIR_RECORD="$(grep -nr RECORDING /home/jibri/finalize_recording.sh|head -n1|cut -d "=" -f2)"
REDIS_CONF="/etc/redis/redis.conf"
2020-05-03 12:59:25 +00:00
JITSI_MEET_PROXY="/etc/nginx/modules-enabled/60-jitsi-meet.conf"
if [ -f $JITSI_MEET_PROXY ];then
PREAD_PROXY=$(grep -nr "preread_server_name" $JITSI_MEET_PROXY | cut -d ":" -f1)
fi
2020-09-30 02:27:13 +00:00
echo -e "\n# Check for jitsi-meet/jibri\n"
if [ "$(dpkg-query -W -f='${Status}' jibri 2>/dev/null | grep -c "ok installed")" == "1" ] || \
[ -f /etc/prosody/conf.d/$DOMAIN.conf ]; then
echo "jibri is installed, checking version:"
apt-show-versions jibri
else
echo "Wait!, jibri or jitsi-meet is not installed on this system using apt, exiting..."
exit
fi
exit_ifinstalled() {
if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
echo " This instance already has $1 installed, exiting..."
echo " Please report to:
-> https://github.com/switnet-ltd/quick-jibri-installer/issues "
exit
2020-04-11 12:44:14 +00:00
fi
}
install_ifnot() {
if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then
echo " $1 is installed, skipping..."
else
echo -e "\n---- Installing $1 ----"
2020-04-14 16:49:11 +00:00
apt-get -yq2 install $1
fi
}
add_php74() {
if [ "$PHP_REPO" = "php" ]; then
2020-04-10 02:43:29 +00:00
echo "PHP $PHPVER already installed"
apt-get -q2 update
apt-get -yq2 dist-upgrade
else
echo "# Adding Ondrej PHP $PHPVER PPA Repository"
apt-key adv --recv-keys --keyserver keyserver.ubuntu.com E5267A6C
echo "deb [arch=amd64] http://ppa.launchpad.net/ondrej/php/ubuntu $DISTRO_RELEASE main" > /etc/apt/sources.list.d/php7x.list
2020-04-14 16:49:11 +00:00
apt-get update -q2
fi
}
2020-04-27 22:49:25 +00:00
#Prevent root folder permission issues
cp $PWD/files/jra-nc-app-ef.json /tmp
exit_ifinstalled postgresql-$PSGVER
## Install software requirements
# PostgresSQL
install_ifnot postgresql-$PSGVER
# PHP 7.4
add_php74
2020-04-14 16:49:11 +00:00
apt-get install -y \
php$PHPVER-fpm \
php$PHPVER-bcmath \
php$PHPVER-bz2 \
php$PHPVER-curl \
php$PHPVER-gd \
php$PHPVER-gmp \
php$PHPVER-intl \
php$PHPVER-json \
php$PHPVER-ldap \
php$PHPVER-mbstring \
php$PHPVER-pgsql \
php$PHPVER-soap \
php$PHPVER-xml \
php$PHPVER-xmlrpc \
php$PHPVER-zip \
php-imagick \
php-redis \
2020-09-30 02:27:13 +00:00
redis-server \
unzip
#System related
install_ifnot smbclient
sed -i "s|.*env\[HOSTNAME\].*|env\[HOSTNAME\] = \$HOSTNAME|" $PHP_CONF
sed -i "s|.*env\[PATH\].*|env\[PATH\] = /usr/local/bin:/usr/bin:/bin|" $PHP_CONF
sed -i "s|.*env\[TMP\].*|env\[TMP\] = /tmp|" $PHP_CONF
sed -i "s|.*env\[TMPDIR\].*|env\[TMPDIR\] = /tmp|" $PHP_CONF
sed -i "s|.*env\[TEMP\].*|env\[TEMP\] = /tmp|" $PHP_CONF
sed -i "s|;clear_env = no|clear_env = no|" $PHP_CONF
echo "
Tunning PHP.ini...
"
# Change values in php.ini (increase max file size)
# max_execution_time
sed -i "s|max_execution_time =.*|max_execution_time = 3500|g" "$PHP_INI"
# max_input_time
sed -i "s|max_input_time =.*|max_input_time = 3600|g" "$PHP_INI"
# memory_limit
sed -i "s|memory_limit =.*|memory_limit = 512M|g" "$PHP_INI"
# post_max
sed -i "s|post_max_size =.*|post_max_size = 1025M|g" "$PHP_INI"
# upload_max
sed -i "s|upload_max_filesize =.*|upload_max_filesize = 1024M|g" "$PHP_INI"
phpenmod opcache
{
echo "# OPcache settings for Nextcloud"
echo "opcache.enable=1"
echo "opcache.enable_cli=1"
echo "opcache.interned_strings_buffer=8"
echo "opcache.max_accelerated_files=10000"
echo "opcache.memory_consumption=256"
echo "opcache.save_comments=1"
echo "opcache.revalidate_freq=1"
echo "opcache.validate_timestamps=1"
} >> "$PHP_INI"
systemctl restart php$PHPVER-fpm.service
#--------------------------------------------------
2020-08-08 05:36:08 +00:00
# Create DB user
#--------------------------------------------------
echo -e "\n---- Creating the PgSQL DB & User ----"
2020-09-30 02:27:13 +00:00
cd /tmp
sudo -u postgres psql <<DB
2020-04-10 02:43:29 +00:00
CREATE DATABASE nextcloud_db;
CREATE USER ${NC_DB_USER} WITH ENCRYPTED PASSWORD '${NC_DB_PASSWD}';
GRANT ALL PRIVILEGES ON DATABASE ${NC_DB} TO ${NC_DB_USER};
DB
2020-04-10 22:36:44 +00:00
echo "Done!
"
#nginx - configuration
cat << NC_NGINX > $NC_NGINX_CONF
2020-06-17 22:06:51 +00:00
#nextcloud config
2020-04-10 02:43:29 +00:00
upstream php-handler {
#server 127.0.0.1:9000;
server unix:/run/php/php${PHPVER}-fpm.sock;
}
server {
listen 80;
2020-04-10 02:43:29 +00:00
listen [::]:80;
server_name $NC_DOMAIN;
2020-04-10 02:43:29 +00:00
# enforce https
return 301 https://\$server_name\$request_uri;
}
server {
listen $NC_NGINX_SSL_PORT ssl http2;
listen [::]:$NC_NGINX_SSL_PORT ssl http2;
2020-04-10 02:43:29 +00:00
server_name $NC_DOMAIN;
ssl_certificate /etc/letsencrypt/live/$NC_DOMAIN/fullchain.pem;
ssl_certificate_key /etc/letsencrypt/live/$NC_DOMAIN/privkey.pem;
# Add headers to serve security related headers
2020-04-10 02:43:29 +00:00
# Before enabling Strict-Transport-Security headers please read into this
# topic first.
# add_header Strict-Transport-Security "max-age=15552000; includeSubDomains; preload;";
2020-04-10 02:43:29 +00:00
#
# WARNING: Only add the preload option once you read about
# the consequences in https://hstspreload.org/. This option
# will add the domain to a hardcoded list that is shipped
# in all major browsers and getting removed from this list
# could take several months.
2020-04-11 07:52:19 +00:00
add_header Referrer-Policy "no-referrer" always;
add_header X-Content-Type-Options "nosniff" always;
add_header X-Download-Options "noopen" always;
add_header X-Frame-Options "SAMEORIGIN" always;
add_header X-Permitted-Cross-Domain-Policies "none" always;
add_header X-Robots-Tag "none" always;
add_header X-XSS-Protection "1; mode=block" always;
# Path to the root of your installation
2020-04-10 02:43:29 +00:00
root $NC_PATH/;
location = /robots.txt {
allow all;
log_not_found off;
access_log off;
}
# The following 2 rules are only needed for the user_webfinger app.
# Uncomment it if you're planning to use this app.
#rewrite ^/.well-known/host-meta /public.php?service=host-meta last;
#rewrite ^/.well-known/host-meta.json /public.php?service=host-meta-json
# last;
location = /.well-known/carddav {
2020-04-10 02:43:29 +00:00
return 301 \$scheme://\$host/remote.php/dav;
}
location = /.well-known/caldav {
2020-04-10 02:43:29 +00:00
return 301 \$scheme://\$host/remote.php/dav;
}
location ~ /.well-known/acme-challenge {
allow all;
}
# set max upload size
client_max_body_size 1024M;
fastcgi_buffers 64 4K;
2020-04-10 02:43:29 +00:00
# Enable gzip but do not remove ETag headers
gzip on;
gzip_vary on;
gzip_comp_level 4;
gzip_min_length 256;
gzip_proxied expired no-cache no-store private no_last_modified no_etag auth;
gzip_types application/atom+xml application/javascript application/json application/ld+json application/manifest+json application/rss+xml application/vnd.geo+json application/vnd.ms-fontobject application/x-font-ttf application/x-web-app-manifest+json application/xhtml+xml application/xml font/opentype image/bmp image/svg+xml image/x-icon text/cache-manifest text/css text/plain text/vcard text/vnd.rim.location.xloc text/vtt text/x-component text/x-cross-domain-policy;
2020-04-10 02:43:29 +00:00
# Uncomment if your server is built with the ngx_pagespeed module
# This module is currently not supported.
#pagespeed off;
location / {
2020-04-10 02:43:29 +00:00
rewrite ^ /index.php\$uri;
}
location ~ ^/(?:build|tests|config|lib|3rdparty|templates|data)/ {
2020-04-10 02:43:29 +00:00
deny all;
}
location ~ ^/(?:\.|autotest|occ|issue|indie|db_|console) {
2020-04-10 02:43:29 +00:00
deny all;
}
location ~ ^/(?:index|remote|public|cron|core/ajax/update|status|ocs/v[12]|updater/.+|ocs-provider/.+)\.php(?:\$|/) {
fastcgi_split_path_info ^(.+\.php)(/.*)\$;
include fastcgi_params;
fastcgi_param SCRIPT_FILENAME \$document_root\$fastcgi_script_name;
fastcgi_param PATH_INFO \$fastcgi_path_info;
fastcgi_param HTTPS on;
#Avoid sending the security headers twice
fastcgi_param modHeadersAvailable true;
fastcgi_param front_controller_active true;
fastcgi_pass php-handler;
fastcgi_intercept_errors on;
fastcgi_request_buffering off;
fastcgi_read_timeout 300;
}
location ~ ^/(?:updater|ocs-provider)(?:\$|/) {
2020-04-10 02:43:29 +00:00
try_files \$uri/ =404;
index index.php;
}
# Adding the cache control header for js and css files
# Make sure it is BELOW the PHP block
2020-04-10 02:43:29 +00:00
location ~ \.(?:css|js|woff|svg|gif)\$ {
try_files \$uri /index.php\$uri\$is_args\$args;
2020-04-10 02:43:29 +00:00
add_header Cache-Control "public, max-age=15778463";
# Add headers to serve security related headers (It is intended to
# have those duplicated to the ones above)
2020-04-10 02:43:29 +00:00
# Before enabling Strict-Transport-Security headers please read into
# this topic first.
# add_header Strict-Transport-Security "max-age=15768000; includeSubDomains; preload;";
#
# WARNING: Only add the preload option once you read about
# the consequences in https://hstspreload.org/. This option
# will add the domain to a hardcoded list that is shipped
# in all major browsers and getting removed from this list
# could take several months.
2020-04-11 07:52:19 +00:00
add_header Referrer-Policy "no-referrer" always;
add_header X-Content-Type-Options "nosniff" always;
add_header X-Download-Options "noopen" always;
add_header X-Frame-Options "SAMEORIGIN" always;
add_header X-Permitted-Cross-Domain-Policies "none" always;
add_header X-Robots-Tag "none" always;
add_header X-XSS-Protection "1; mode=block" always;
# Optional: Don't log access to assets
access_log off;
2020-04-10 02:43:29 +00:00
}
2020-04-10 02:43:29 +00:00
location ~ \.(?:png|html|ttf|ico|jpg|jpeg)\$ {
try_files \$uri /index.php\$uri\$is_args\$args;
# Optional: Don't log access to other assets
access_log off;
2020-04-10 02:43:29 +00:00
}
}
NC_NGINX
2020-04-10 02:43:29 +00:00
systemctl stop nginx
letsencrypt certonly --standalone --renew-by-default --agree-tos -d $NC_DOMAIN
if [ -f /etc/letsencrypt/live/$NC_DOMAIN/fullchain.pem ];then
ln -s /etc/nginx/sites-available/$NC_DOMAIN.conf /etc/nginx/sites-enabled/
else
2020-04-11 16:52:53 +00:00
echo "There are issues on getting the SSL certs..."
read -n 1 -s -r -p "Press any key to continue"
2020-04-10 02:43:29 +00:00
fi
nginx -t
2020-04-11 16:52:53 +00:00
systemctl restart nginx
if [ "$ENABLE_HSTS" = "yes" ]; then
sed -i "s|# add_header Strict-Transport-Security|add_header Strict-Transport-Security|g" $NC_NGINX_CONF
fi
2020-08-17 15:11:10 +00:00
if [ "$DISTRO_RELEASE" != "xenial" ] && [ -z $PREAD_PROXY ]; then
2020-05-03 12:59:25 +00:00
echo "
Setting up Nextcloud domain on Jitsi Meet turn proxy
"
sed -i "/server {/i \ \ map \$ssl_preread_server_name \$upstream {" $JITSI_MEET_PROXY
sed -i "/server {/i \ \ \ \ \ \ $DOMAIN web;" $JITSI_MEET_PROXY
sed -i "/server {/i \ \ \ \ \ \ $NC_DOMAIN web;" $JITSI_MEET_PROXY
sed -i "/server {/i \ \ }" $JITSI_MEET_PROXY
fi
echo "
Latest version to be installed: $STABLEVERSION
2020-07-20 09:20:47 +00:00
(This might take sometime, please be patient...)
"
2020-04-11 13:05:17 +00:00
curl -s $NC_REPO/$STABLEVERSION.zip > /tmp/$STABLEVERSION.zip
2020-04-11 15:58:37 +00:00
unzip -q /tmp/$STABLEVERSION.zip
mv nextcloud $NC_PATH
chown -R www-data:www-data $NC_PATH
chmod -R 755 $NC_PATH
echo "
Database installation...
"
2020-04-11 06:40:51 +00:00
sudo -u www-data php $NC_PATH/occ maintenance:install \
--database=pgsql \
--database-name="$NC_DB" \
--database-user="$NC_DB_USER" \
--database-pass="$NC_DB_PASSWD" \
--admin-user="$NC_USER" \
--admin-pass="$NC_PASS"
echo "
Apply custom mods...
"
sed -i "/datadirectory/a \ \ \'skeletondirectory\' => \'\'," $NC_CONFIG
sed -i "/skeletondirectory/a \ \ \'simpleSignUpLink.shown\' => false," $NC_CONFIG
sed -i "/simpleSignUpLink.shown/a \ \ \'knowledgebaseenabled\' => false," $NC_CONFIG
sed -i "s|http://localhost|http://$NC_DOMAIN|" $NC_CONFIG
2020-04-14 16:49:11 +00:00
echo "Add crontab..."
crontab -u www-data -l | { cat; echo "*/5 * * * * php -f $NC_PATH/cron.php"; } | crontab -u www-data -
echo "
Add memcache support...
"
sed -i "s|# unixsocket .*|unixsocket /var/run/redis/redis.sock|g" $REDIS_CONF
sed -i "s|# unixsocketperm .*|unixsocketperm 777|g" $REDIS_CONF
sed -i "s|port 6379|port 0|" $REDIS_CONF
systemctl restart redis-server
echo "--> Setting config.php..."
sed -i "/);/i \ \ 'filelocking.enabled' => 'true'," $NC_CONFIG
sed -i "/);/i \ \ 'memcache.locking' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
sed -i "/);/i \ \ 'memcache.local' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
sed -i "/);/i \ \ 'memcache.distributed' => '\\\OC\\\Memcache\\\Redis'," $NC_CONFIG
sed -i "/);/i \ \ 'redis' =>" $NC_CONFIG
sed -i "/);/i \ \ \ \ array (" $NC_CONFIG
sed -i "/);/i \ \ \ \ \ 'host' => '/var/run/redis/redis.sock'," $NC_CONFIG
sed -i "/);/i \ \ \ \ \ 'port' => 0," $NC_CONFIG
sed -i "/);/i \ \ \ \ \ 'timeout' => 0," $NC_CONFIG
sed -i "/);/i \ \ )," $NC_CONFIG
echo "Done
"
echo "
Addding & Setting up Files External App for Local storage...
"
2020-04-11 19:17:42 +00:00
sudo -u www-data php $NC_PATH/occ app:install files_external
sudo -u www-data php $NC_PATH/occ app:enable files_external
2020-04-27 22:49:25 +00:00
sudo -u www-data php $NC_PATH/occ files_external:import /tmp/jra-nc-app-ef.json
usermod -a -G jibri www-data
chown -R jibri:www-data $DIR_RECORD
chmod -R 770 $DIR_RECORD
chmod -R g+s $DIR_RECORD
echo "
Fixing possible missing tables...
"
2020-04-11 19:17:42 +00:00
echo "y"|sudo -u www-data php $NC_PATH/occ db:convert-filecache-bigint
sudo -u www-data php $NC_PATH/occ db:add-missing-indices
sudo -u www-data php $NC_PATH/occ db:add-missing-columns
echo "
Adding trusted domain...
"
2020-04-11 19:17:42 +00:00
sudo -u www-data php $NC_PATH/occ config:system:set trusted_domains 0 --value=$NC_DOMAIN
2020-08-08 06:49:35 +00:00
echo "Setting JRA domain on jitsi-updater.sh"
cd ~/quick-jibri-installer
2020-08-08 06:49:35 +00:00
sed -i "s|NC_DOMAIN=.*|NC_DOMAIN=\"$NC_DOMAIN\"|" jitsi-updater.sh
echo "Quick Nextcloud installation complete!"