#!/bin/bash # Quick Jibri Installer - *buntu (LTS) based systems. # SwITNet Ltd © - 2020, https://switnet.net/ # GPLv3 or later. { echo "Started at $(date +'%Y-%m-%d %H:%M:%S')" >> qj-installer.log while getopts m: option do case "${option}" in m) MODE=${OPTARG};; \?) echo "Usage: sudo ./quick_jibri_installer.sh [-m debug]" && exit;; esac done #DEBUG if [ "$MODE" = "debug" ]; then set -x fi # SYSTEM SETUP JITSI_REPO=$(apt-cache policy | grep http | grep jitsi | grep stable | awk '{print $3}' | head -n 1 | cut -d "/" -f1) APACHE_2=$(dpkg-query -W -f='${Status}' apache2 2>/dev/null | grep -c "ok installed") NGINX=$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed") DIST=$(lsb_release -sc) GOOGL_REPO="/etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list" PROSODY_REPO=$(apt-cache policy | grep http | grep prosody| awk '{print $3}' | head -n 1 | cut -d "/" -f2) HWE_VIR_MOD=$(apt-cache madison linux-modules-extra-virtual-hwe-$(lsb_release -sr) 2>/dev/null|head -n1|grep -c "extra-virtual-hwe") if [ $DIST = flidas ]; then DIST="xenial" fi if [ $DIST = etiona ]; then DIST="bionic" fi install_ifnot() { if [ "$(dpkg-query -W -f='${Status}' $1 2>/dev/null | grep -c "ok installed")" == "1" ]; then echo " $1 is installed, skipping..." else echo -e "\n---- Installing $1 ----" apt-get -yq2 install $1 fi } check_serv() { if [ "$APACHE_2" -eq 1 ]; then echo " The recommended setup is using NGINX, exiting... " exit elif [ "$NGINX" -eq 1 ]; then echo " Webserver already installed! " else echo " Installing nginx webserver! " install_ifnot nginx fi } check_snd_driver() { modprobe snd-aloop echo "snd-aloop" >> /etc/modules if [ "$(lsmod | grep snd_aloop | head -n 1 | cut -d " " -f1)" = "snd_aloop" ]; then echo " #----------------------------------------------------------------------- # Audio driver seems - OK. #-----------------------------------------------------------------------" else echo " #----------------------------------------------------------------------- # Your audio driver might not be able to load, once the installation # is complete and server restarted, please run: \`lsmod | grep snd_aloop' # to make sure it did. If not, any feedback for your setup is welcome. #-----------------------------------------------------------------------" read -n 1 -s -r -p "Press any key to continue..."$'\n' fi } # sed limiters for add-jibri-node.sh variables var_dlim() { grep -n $1 add-jibri-node.sh|head -n1|cut -d ":" -f1 } add_prosody_repo() { echo "Add Prosody repo" if [ "$PROSODY_REPO" = "main" ]; then echo "Prosody repository already installed" else echo "deb http://packages.prosody.im/debian $(lsb_release -sc) main" > /etc/apt/sources.list.d/prosody.list wget -qO - https://prosody.im/files/prosody-debian-packages.key | apt-key add - fi } clear echo ' ######################################################################## Welcome to Jitsi/Jibri Installer ######################################################################## by Software, IT & Networks Ltd Featuring: - Jibri Recording and YouTube Streaming - Jibri Recordings Access via Nextcloud - Jigasi Transcription (Advanced) - Customized brandless mode - Recurring changes updater Learn more about these at, Main repository: https://github.com/switnet-ltd/quick-jibri-installer Wiki and documentation: https://github.com/switnet-ltd/quick-jibri-installer/wiki ' read -n 1 -s -r -p "Press any key to continue..."$'\n' #Check if user is root if ! [ $(id -u) = 0 ]; then echo "You need to be root or have sudo privileges!" exit 0 fi if [ "$DIST" = "xenial" ] || \ [ "$DIST" = "bionic" ] || \ [ "$DIST" = "focal" ]; then echo "OS: $(lsb_release -sd)" echo "Good, this is a supported platform!" else echo "OS: $(lsb_release -sd)" echo "Sorry, this platform is not supported... exiting" exit fi #Suggest 18.04 LTS release over 16.04 if [ "$DIST" = "xenial" ]; then echo "$(lsb_release -sc), even when it's compatible and functional. We suggest to use the next (LTS) release, for longer support and security reasons." read -n 1 -s -r -p "Press any key to continue..."$'\n' fi #Check resources echo "Verifying System Resources:" if [ "$(nproc --all)" -lt 4 ];then echo " Warning!: The system do not meet the minimum CPU requirements for Jibri to run. >> We recommend 4 cores/threads for Jibri! " CPU_MIN="N" else echo "CPU Cores/Threads: OK ($(nproc --all))" CPU_MIN="Y" fi ### Test RAM size (8GB min) ### mem_available=$(grep MemTotal /proc/meminfo| grep -o '[0-9]\+') if [ ${mem_available} -lt 7700000 ]; then echo " Warning!: The system do not meet the minimum RAM requirements for Jibri to run. >> We recommend 8GB RAM for Jibri! " MEM_MIN="N" else echo "Memory: OK ($((mem_available/1024)) MiB)" MEM_MIN="Y" fi if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then echo "All requirements seems meet!" echo "We hope you have a nice recording/streaming session" else echo "CPU ($(nproc --all))/RAM ($((mem_available/1024)) MiB) does NOT meet minimum recommended requirements!" echo "Even when you can use the videconference sessions, we advice to increase the resoruces in order to user Jibri." while [[ "$CONTINUE_LOW_RES" != "yes" && "$CONTINUE_LOW_RES" != "no" ]] do read -p "> Do you want to continue?: (yes or no)"$'\n' -r CONTINUE_LOW_RES if [ "$CONTINUE_LOW_RES" = "no" ]; then echo "See you next time with more resources!..." exit elif [ "$CONTINUE_LOW_RES" = "yes" ]; then echo "Please keep in mind that trying to use Jibri with low resources might fail." fi done fi #Prosody repository #add_prosody_repo # Jitsi-Meet Repo echo "Add Jitsi repo" if [ "$JITSI_REPO" = "unstable" ]; then echo "Jitsi stable repository already installed" else echo 'deb http://download.jitsi.org unstable/' > /etc/apt/sources.list.d/jitsi-unstable.list wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add - fi #Default to LE SSL? while [[ $LE_SSL != yes && $LE_SSL != no ]] do read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)"$'\n' -r LE_SSL if [ $LE_SSL = yes ]; then echo "We'll defaul to Let's Encrypt SSL certs." else echo "We'll let you choose later on for it." fi done # Requirements echo "We'll start by installing system requirements this may take a while please be patient..." apt-get update -q2 apt-get dist-upgrade -yq2 apt-get -y install \ bmon \ curl \ ffmpeg \ git \ htop \ letsencrypt \ unzip \ wget echo "# Check and Install HWE kernel if possible..." if [ "$HWE_VIR_MOD" == "1" ]; then apt-get -y install \ linux-image-generic-hwe-$(lsb_release -sr) \ linux-modules-extra-virtual-hwe-$(lsb_release -sr) else apt-get -y install \ linux-modules-extra-$(uname -r) fi check_serv echo " #-------------------------------------------------- # Install Jitsi Framework #-------------------------------------------------- " if [ "$LE_SSL" = "yes" ]; then echo "set jitsi-meet/cert-choice select Generate a new self-signed certificate (You will later get a chance to obtain a Let's encrypt certificate)" | debconf-set-selections fi apt-get -y install \ jitsi-meet \ jibri \ openjdk-8-jre-headless # Fix RAND_load_file error #https://github.com/openssl/openssl/issues/7754#issuecomment-444063355 sed -i "/RANDFILE/d" /etc/ssl/openssl.cnf echo " #-------------------------------------------------- # Install NodeJS #-------------------------------------------------- " if [ "$(dpkg-query -W -f='${Status}' nodejs 2>/dev/null | grep -c "ok")" == "1" ]; then echo "Nodejs is installed, skipping..." else curl -sL https://deb.nodesource.com/setup_10.x | sudo -E bash - apt-get install -yq2 nodejs echo "Installing nodejs esprima package..." npm install -g esprima fi if [ "$(npm list -g esprima 2>/dev/null | grep -c "empty")" == "1" ]; then echo "Installing nodejs esprima package..." npm install -g esprima elif [ "$(npm list -g esprima 2>/dev/null | grep -c "esprima")" == "1" ]; then echo "Good. Esprima package is already installed" fi # ALSA - Loopback echo "snd-aloop" | tee -a /etc/modules check_snd_driver CHD_VER=$(curl -sL https://chromedriver.storage.googleapis.com/LATEST_RELEASE) GCMP_JSON="/etc/opt/chrome/policies/managed/managed_policies.json" echo "# Installing Google Chrome / ChromeDriver" if [ -f $GOOGL_REPO ]; then echo "Google repository already set." else echo "Installing Google Chrome Stable" wget -q -O - https://dl.google.com/linux/linux_signing_key.pub | apt-key add - echo "deb http://dl.google.com/linux/chrome/deb/ stable main" | tee $GOOGL_REPO fi apt-get -q2 update apt-get install -yq2 google-chrome-stable rm -rf /etc/apt/sources.list.d/dl_google_com_linux_chrome_deb.list if [ -f /usr/local/bin/chromedriver ]; then echo "Chromedriver already installed." else echo "Installing Chromedriver" wget -q https://chromedriver.storage.googleapis.com/$CHD_VER/chromedriver_linux64.zip -O /tmp/chromedriver_linux64.zip unzip /tmp/chromedriver_linux64.zip -d /usr/local/bin/ chown root:root /usr/local/bin/chromedriver chmod 0755 /usr/local/bin/chromedriver rm -rf /tpm/chromedriver_linux64.zip fi echo " Check Google Software Working... " /usr/bin/google-chrome --version /usr/local/bin/chromedriver --version | awk '{print$1,$2}' echo " Remove Chrome warning... " mkdir -p /etc/opt/chrome/policies/managed echo '{ "CommandLineFlagSecurityWarningsEnabled": false }' > $GCMP_JSON echo ' ######################################################################## Please Setup Your Installation ######################################################################## ' # MEET / JIBRI SETUP DOMAIN=$(ls /etc/prosody/conf.d/ | grep -v localhost | awk -F'.cfg' '{print $1}' | awk '!NF || !seen[$0]++') WS_CONF=/etc/nginx/sites-enabled/$DOMAIN.conf JB_AUTH_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)" JB_REC_PASS="$(tr -dc "a-zA-Z0-9#*=" < /dev/urandom | fold -w 10 | head -n1)" PROSODY_FILE=/etc/prosody/conf.d/$DOMAIN.cfg.lua PROSODY_SYS=/etc/prosody/prosody.cfg.lua JICOFO_SIP=/etc/jitsi/jicofo/sip-communicator.properties MEET_CONF=/etc/jitsi/meet/$DOMAIN-config.js CONF_JSON=/etc/jitsi/jibri/config.json DIR_RECORD=/var/jbrecord REC_DIR=/home/jibri/finalize_recording.sh JB_NAME="Jibri Sessions" LE_RENEW_LOG="/var/log/letsencrypt/renew.log" MOD_LISTU="https://prosody.im/files/mod_listusers.lua" MOD_LIST_FILE="/usr/lib/prosody/modules/mod_listusers.lua" ENABLE_SA="yes" CERTBOT_REPO=$(apt-cache policy | grep http | grep certbot | head -n 1 | awk '{print $2}' | cut -d "/" -f4) CERTBOT_REL_FILE="http://ppa.launchpad.net/certbot/certbot/ubuntu/dists/$(lsb_release -sc)/Release" GC_SDK_REL_FILE="http://packages.cloud.google.com/apt/dists/cloud-sdk-$(lsb_release -sc)/Release" #Sysadmin email while [[ -z $SYSADMIN_EMAIL ]] do read -p "Set sysadmin email (this is a mandatory field):"$'\n' -r SYSADMIN_EMAIL done #Language echo "## Setting up Jitsi Meet language ## You can define the language, for a complete list of the supported languages See here: https://github.com/jitsi/jitsi-meet/blob/master/lang/languages.json Jitsi Meet web interface will be set to use such language. " read -p "Please set your language (Press enter to default to 'en'):"$'\n' -r LANG #Drop unsecure TLS while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]] do read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)"$'\n' -r DROP_TLS1 if [ "$DROP_TLS1" = "no" ]; then echo "TLSv1.0/1.1 will remain." elif [ "$DROP_TLS1" = "yes" ]; then echo "TLSv1.0/1.1 will be dropped" fi done #SSL LE if [ "$LE_SSL" = "yes" ]; then ENABLE_SSL=yes else while [[ "$ENABLE_SSL" != "yes" && "$ENABLE_SSL" != "no" ]] do read -p "> Do you want to setup LetsEncrypt with your domain: (yes or no)"$'\n' -r ENABLE_SSL if [ "$ENABLE_SSL" = "no" ]; then echo "Please run letsencrypt.sh manually post-installation." else echo "SSL will be enabled." fi done fi #Dropbox -- no longer requirement for localrecording #while [[ $ENABLE_DB != yes && $ENABLE_DB != no ]] #do #read -p "> Do you want to setup the Dropbox feature now: (yes or no)"$'\n' -r ENABLE_DB #if [ $ENABLE_DB = no ]; then # echo "Dropbox won't be enable" #elif [ $ENABLE_DB = yes ]; then # read -p "Please set your Drobbox App key: "$'\n' -r DB_CID #fi #done #Brandless Mode while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]] do read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)"$'\n' -r ENABLE_BLESSM if [ "$ENABLE_BLESSM" = "no" ]; then echo "Brandless mode won't be set." elif [ "$ENABLE_BLESSM" = "yes" ]; then echo "Brandless mode will be set." fi done echo "We'll take a minute to localize some UI excerpts if you need." #Participant echo "> Do you want to translate 'Participant' to your own language?" read -p "Leave empty to use the default one (English): "$'\n' L10N_PARTICIPANT #Me echo "> Do you want to translate 'me' to your own language? This must be a really small word to present one self. Some suggestions might be: yo (Spanish) | je (French) | ich (German)" read -p "Leave empty to use the default one (English): "$'\n' L10N_ME #Welcome Page while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]] do read -p "> Do you want to disable the Welcome page: (yes or no)"$'\n' -r ENABLE_WELCP if [ "$ENABLE_WELCP" = "yes" ]; then echo "Welcome page will be disabled." elif [ "$ENABLE_WELCP" = "no" ]; then echo "Welcome page will be enabled." fi done #Enable static avatar while [[ "$ENABLE_SA" != "yes" && "$ENABLE_SA" != "no" ]] do read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)"$'\n' -r ENABLE_SA if [ "$ENABLE_SA" = "no" ]; then echo "Static avatar won't be enabled" elif [ "$ENABLE_SA" = "yes" ]; then echo "Static avatar will be enabled" fi done #Enable local audio recording while [[ "$ENABLE_LAR" != "yes" && "$ENABLE_LAR" != "no" ]] do read -p "> Do you want to enable local audio recording option?: (yes or no)"$'\n' -r ENABLE_LAR if [ "$ENABLE_LAR" = "no" ]; then echo "Local audio recording option won't be enabled" elif [ "$ENABLE_LAR" = "yes" ]; then echo "Local audio recording option will be enabled" fi done #Secure room initial user while [[ "$ENABLE_SC" != "yes" && "$ENABLE_SC" != "no" ]] do read -p "> Do you want to enable secure rooms?: (yes or no)"$'\n' -r ENABLE_SC if [ "$ENABLE_SC" = "no" ]; then echo "-- Secure rooms won't be enabled." elif [ "$ENABLE_SC" = "yes" ]; then echo "-- Secure rooms will be enabled." read -p "Set username for secure room moderator: "$'\n' -r SEC_ROOM_USER read -p "Secure room moderator password: "$'\n' -r SEC_ROOM_PASS fi done #Jibri Records Access (JRA) via Nextcloud while [[ "$ENABLE_NC_ACCESS" != "yes" && "$ENABLE_NC_ACCESS" != "no" ]] do read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no) ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_NC_ACCESS if [ "$ENABLE_NC_ACCESS" = "no" ]; then echo "JRA via Nextcloud won't be enabled." elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then echo "JRA via Nextcloud will be enabled." fi done #Jigasi if [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "404" ]; then echo "> Sorry Google SDK doesn't have support yet for $(lsb_release -sd), thus, Jigasi Transcript can't be enable." elif [ "$(curl -s -o /dev/null -w "%{http_code}" $GC_SDK_REL_FILE )" == "200" ]; then while [[ "$ENABLE_TRANSCRIPT" != "yes" && "$ENABLE_TRANSCRIPT" != "no" ]] do read -p "> Do you want to setup Jigasi Transcription: (yes or no) ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_TRANSCRIPT if [ "$ENABLE_TRANSCRIPT" = "no" ]; then echo "Jigasi Transcription won't be enabled." elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then echo "Jigasi Transcription will be enabled." fi done else echo "No valid option for Jigasi.Please report this to https://github.com/switnet-ltd/quick-jibri-installer/issues " fi #Grafana while [[ "$ENABLE_GRAFANA_DSH" != "yes" && "$ENABLE_GRAFANA_DSH" != "no" ]] do read -p "> Do you want to setup Grafana Dashboard: (yes or no) ( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )"$'\n' -r ENABLE_GRAFANA_DSH if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then echo "Grafana Dashboard won't be enabled." elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then echo "Grafana Dashboard will be enabled." fi done #Start configuration echo ' ######################################################################## Start Jitsi Framework configuration ######################################################################## ' JibriBrewery=JibriBrewery INT_CONF="/usr/share/jitsi-meet/interface_config.js" WAN_IP=$(dig +short myip.opendns.com @resolver1.opendns.com) ssl_wa() { systemctl stop $1 letsencrypt certonly --standalone --renew-by-default --agree-tos --email $5 -d $6 sed -i "s|/etc/jitsi/meet/$3.crt|/etc/letsencrypt/live/$3/fullchain.pem|" $4 sed -i "s|/etc/jitsi/meet/$3.key|/etc/letsencrypt/live/$3/privkey.pem|" $4 systemctl restart $1 #Add cron crontab -l | { cat; echo "@weekly certbot renew --${2} > $LE_RENEW_LOG 2>&1"; } | crontab - crontab -l } enable_letsencrypt() { if [ "$ENABLE_SSL" = "yes" ]; then echo ' #-------------------------------------------------- # Starting LetsEncrypt configuration #-------------------------------------------------- ' #Disabled 'til fixed upstream #bash /usr/share/jitsi-meet/scripts/install-letsencrypt-cert.sh echo "#Set and upgrade certbot PPA if posssible..." if [ "$CERTBOT_REPO" = "certbot" ]; then echo " Cerbot repository already on the system! Checking for updates... " apt-get -q2 update apt-get -yq2 dist-upgrade elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "200" ]; then echo " Adding cerbot (formerly letsencrypt) PPA repository for latest updates " echo "deb http://ppa.launchpad.net/certbot/certbot/ubuntu $DIST main" > /etc/apt/sources.list.d/certbot.list apt-key adv --keyserver keyserver.ubuntu.com --recv-keys 75BCA694 apt-get -q2 update apt-get -yq2 dist-upgrade elif [ "$(curl -s -o /dev/null -w "%{http_code}" $CERTBOT_REL_FILE )" == "404" ]; then echo " Certbot PPA is not available for $(lsb_release -sc) just yet, it won't be installed... " fi else echo "SSL setup will be skipped." fi } check_jibri() { if [ "$(dpkg-query -W -f='${Status}' "jibri" 2>/dev/null | grep -c "ok installed")" == "1" ] then systemctl restart jibri systemctl restart jibri-icewm systemctl restart jibri-xorg else echo "Jibri service not installed" fi } # Restarting services restart_services() { systemctl restart jitsi-videobridge2 systemctl restart jicofo systemctl restart prosody check_jibri } # Configure Jibri ## PROSODY cat << MUC-JIBRI >> $PROSODY_FILE -- internal muc component, meant to enable pools of jibri and jigasi clients Component "internal.auth.$DOMAIN" "muc" modules_enabled = { "ping"; } storage = "null" muc_room_cache_size = 1000 MUC-JIBRI cat << REC-JIBRI >> $PROSODY_FILE VirtualHost "recorder.$DOMAIN" modules_enabled = { "ping"; } authentication = "internal_plain" REC-JIBRI #Fix Jibri conectivity issues sed -i "s|c2s_require_encryption = .*|c2s_require_encryption = false|" $PROSODY_SYS sed -i "/c2s_require_encryption = false/a \\ \\ consider_bosh_secure = true" $PROSODY_SYS if [ ! -z $L10N_PARTICIPANT ]; then sed -i "s|PART_USER=.*|PART_USER=\"$L10N_PARTICIPANT\"|" jm-bm.sh fi if [ ! -z $L10N_ME ]; then sed -i "s|LOCAL_USER=.*|LOCAL_USER=\"$L10N_ME\"|" jm-bm.sh fi if [ ! -f $MOD_LIST_FILE ]; then echo " -> Adding external module to list prosody users... " curl -s $MOD_LISTU > $MOD_LIST_FILE echo "Now you can check registered users with: prosodyctl mod_listusers " else echo "Prosody support for listing users seems to be enabled. check with: prosodyctl mod_listusers " fi ### Prosody users prosodyctl register jibri auth.$DOMAIN $JB_AUTH_PASS prosodyctl register recorder recorder.$DOMAIN $JB_REC_PASS ## JICOFO # /etc/jitsi/jicofo/sip-communicator.properties cat << BREWERY >> $JICOFO_SIP #org.jitsi.jicofo.auth.URL=XMPP:$DOMAIN org.jitsi.jicofo.jibri.BREWERY=$JibriBrewery@internal.auth.$DOMAIN org.jitsi.jicofo.jibri.PENDING_TIMEOUT=90 #org.jitsi.jicofo.auth.DISABLE_AUTOLOGIN=true BREWERY # Jibri tweaks for /etc/jitsi/meet/$DOMAIN-config.js sed -i "s|// anonymousdomain: 'guest.example.com'|anonymousdomain: \'guest.$DOMAIN\'|" $MEET_CONF sed -i "s|conference.$DOMAIN|internal.auth.$DOMAIN|" $MEET_CONF sed -i "s|// fileRecordingsEnabled: false,|fileRecordingsEnabled: true,| " $MEET_CONF sed -i "s|// liveStreamingEnabled: false,|liveStreamingEnabled: true,\\ \\ hiddenDomain: \'recorder.$DOMAIN\',|" $MEET_CONF #Dropbox feature if [ "$ENABLE_DB" = "yes" ]; then DB_STR=$(grep -n "dropbox:" $MEET_CONF | cut -d ":" -f1) DB_END=$((DB_STR + 10)) sed -i "$DB_STR,$DB_END{s|// dropbox: {|dropbox: {|}" $MEET_CONF sed -i "$DB_STR,$DB_END{s|// appKey: ''|appKey: \'$DB_CID\'|}" $MEET_CONF sed -i "$DB_STR,$DB_END{s|// },|},|}" $MEET_CONF fi #LocalRecording if [ "$ENABLE_LAR" = "yes" ]; then echo "# Enabling local recording (audio only)." LR_STR=$(grep -n "// Local Recording" $MEET_CONF | cut -d ":" -f1) LR_END=$((LR_STR + 18)) sed -i "$LR_STR,$LR_END{s|// localRecording: {|localRecording: {|}" $MEET_CONF sed -i "$LR_STR,$LR_END{s|// enabled: true,|enabled: true,|}" $MEET_CONF sed -i "$LR_STR,$LR_END{s|// format: 'flac'|format: 'flac'|}" $MEET_CONF sed -i "$LR_STR,$LR_END{s|// }|}|}" $MEET_CONF sed -i "s|'tileview'|'tileview', 'localrecording'|" $INT_CONF sed -i "s|LOC_REC=.*|LOC_REC=\"on\"|" jitsi-updater.sh fi #Setup main language if [ -z $LANG ] || [ "$LANG" = "en" ]; then echo "Leaving English (en) as default language..." sed -i "s|// defaultLanguage: 'en',|defaultLanguage: 'en',|" $MEET_CONF else echo "Changing default language to: $LANG" sed -i "s|// defaultLanguage: 'en',|defaultLanguage: \'$LANG\',|" $MEET_CONF fi #Check config file echo " # Checking $MEET_CONF file for errors " CHECKJS=$(esvalidate $MEET_CONF| cut -d ":" -f2) if [[ -z "$CHECKJS" ]]; then echo " # The $MEET_CONF configuration seems correct. =) " else echo " Watch out!, there seems to be an issue on $MEET_CONF line: $CHECKJS Most of the times this is due upstream changes, please report to https://github.com/switnet-ltd/quick-jibri-installer/issues " fi # Recording directory if [ ! -d $DIR_RECORD ]; then mkdir $DIR_RECORD fi chown -R jibri:jibri $DIR_RECORD cat << REC_DIR > $REC_DIR #!/bin/bash RECORDINGS_DIR=$DIR_RECORD echo "This is a dummy finalize script" > /tmp/finalize.out echo "The script was invoked with recordings directory $RECORDINGS_DIR." >> /tmp/finalize.out echo "You should put any finalize logic (renaming, uploading to a service" >> /tmp/finalize.out echo "or storage provider, etc.) in this script" >> /tmp/finalize.out chmod -R 770 \$RECORDINGS_DIR exit 0 REC_DIR chown jibri:jibri $REC_DIR chmod +x $REC_DIR ## JSON Config cp $CONF_JSON ${CONF_JSON}.orig cat << CONF_JSON > $CONF_JSON { "recording_directory":"$DIR_RECORD", "finalize_recording_script_path": "$REC_DIR", "xmpp_environments": [ { "name": "$JB_NAME", "xmpp_server_hosts": [ "$DOMAIN" ], "xmpp_domain": "$DOMAIN", "control_login": { "domain": "auth.$DOMAIN", "username": "jibri", "password": "$JB_AUTH_PASS" }, "control_muc": { "domain": "internal.auth.$DOMAIN", "room_name": "$JibriBrewery", "nickname": "Live" }, "call_login": { "domain": "recorder.$DOMAIN", "username": "recorder", "password": "$JB_REC_PASS" }, "room_jid_domain_string_to_strip_from_start": "conference.", "usage_timeout": "0" } ] } CONF_JSON #Setting varibales for add-jibri-node.sh sed -i "s|MAIN_SRV_DIST=.*|MAIN_SRV_DIST=\"$DIST\"|" add-jibri-node.sh sed -i "s|MAIN_SRV_REPO=.*|MAIN_SRV_REPO=\"$JITSI_REPO\"|" add-jibri-node.sh sed -i "s|MAIN_SRV_DOMAIN=.*|MAIN_SRV_DOMAIN=\"$DOMAIN\"|" add-jibri-node.sh sed -i "s|JB_NAME=.*|JB_NAME=\"$JB_NAME\"|" add-jibri-node.sh sed -i "s|JibriBrewery=.*|JibriBrewery=\"$JibriBrewery\"|" add-jibri-node.sh sed -i "s|JB_AUTH_PASS=.*|JB_AUTH_PASS=\"$JB_AUTH_PASS\"|" add-jibri-node.sh sed -i "s|JB_REC_PASS=.*|JB_REC_PASS=\"$JB_REC_PASS\"|" add-jibri-node.sh sed -i "$(var_dlim 0_LAST),$(var_dlim 1_LAST){s|LETS: .*|LETS: $(date -R)|}" add-jibri-node.sh echo "Last file edition at: $(grep "LETS:" add-jibri-node.sh|head -n1|awk -F'LETS:' '{print$2}')" #Tune webserver for Jitsi App control if [ -f $WS_CONF ]; then sed -i "/Anything that didn't match above/i \\\n" $WS_CONF sed -i "/Anything that didn't match above/i \ \ \ \ location = \/external_api.min.js {" $WS_CONF sed -i "/Anything that didn't match above/i \ \ \ \ \ \ \ \ alias \/usr\/share\/jitsi-meet\/libs\/external_api.min.js;" $WS_CONF sed -i "/Anything that didn't match above/i \ \ \ \ }" $WS_CONF sed -i "/Anything that didn't match above/i \\\n" $WS_CONF systemctl reload nginx else echo "No app configuration done to server file, please report to: -> https://github.com/switnet-ltd/quick-jibri-installer/issues" fi #Static avatar if [ "$ENABLE_SA" = "yes" ] && [ -f $WS_CONF ]; then #wget https://switnet.net/static/avatar.png -O /usr/share/jitsi-meet/images/avatar2.png cp images/avatar2.png /usr/share/jitsi-meet/images/ sed -i "/location \/external_api.min.js/i \ \ \ \ location \~ \^\/avatar\/\(.\*\)\\\.png {" $WS_CONF sed -i "/location \/external_api.min.js/i \ \ \ \ \ \ \ \ alias /usr/share/jitsi-meet/images/avatar2.png;" $WS_CONF sed -i "/location \/external_api.min.js/i \ \ \ \ }\\ \ " $WS_CONF sed -i "/RANDOM_AVATAR_URL_PREFIX/ s|false|\'https://$DOMAIN/avatar/\'|" $INT_CONF sed -i "/RANDOM_AVATAR_URL_SUFFIX/ s|false|\'.png\'|" $INT_CONF fi #nginx -tlsv1/1.1 if [ "$DROP_TLS1" = "yes" ] && [ "$DIST" = "bionic" ];then echo "Dropping TLSv1/1.1 in favor of v1.3" sed -i "s|TLSv1 TLSv1.1|TLSv1.3|" /etc/nginx/nginx.conf #sed -i "s|TLSv1 TLSv1.1|TLSv1.3|" $WS_CONF elif [ "$DROP_TLS1" = "yes" ] && [ ! "$DIST" = "bionic" ];then echo "Only dropping TLSv1/1.1" sed -i "s|TLSv1 TLSv1.1||" /etc/nginx/nginx.conf #sed -i "s|TLSv1 TLSv1.1||" $WS_CONF else echo "No TLSv1/1.1 dropping was done. Please report to https://github.com/switnet-ltd/quick-jibri-installer/issues " fi # Disable "Blur my background" until new notice sed -i "s|'videobackgroundblur', ||" $INT_CONF #Setup secure rooms SRP_STR=$(grep -n "VirtualHost \"$DOMAIN\"" $PROSODY_FILE | head -n1 | cut -d ":" -f1) SRP_END=$((SRP_STR + 10)) sed -i "$SRP_STR,$SRP_END{s|authentication = \"anonymous\"|authentication = \"internal_plain\"|}" $PROSODY_FILE cat << P_SR >> $PROSODY_FILE VirtualHost "guest.$DOMAIN" authentication = "anonymous" speakerstats_component = "speakerstats.$DOMAIN" conference_duration_component = "conferenceduration.$DOMAIN" modules_enabled = { "muc_size"; "speakerstats"; "conference_duration"; } c2s_require_encryption = false P_SR #Secure room initial user if [ "$ENABLE_SC" = "yes" ]; then echo "Secure rooms are being enabled..." echo "You'll be able to login Secure Room chat with '${SEC_ROOM_USER}' \ or '${SEC_ROOM_USER}@${DOMAIN}' using the password you just entered. If you have issues with the password refer to your sysadmin." sed -i "s|#org.jitsi.jicofo.auth.URL=XMPP:|org.jitsi.jicofo.auth.URL=XMPP:|" $JICOFO_SIP prosodyctl register $SEC_ROOM_USER $DOMAIN $SEC_ROOM_PASS sed -i "s|SEC_ROOM=.*|SEC_ROOM=\"on\"|" jm-bm.sh fi #Start with video muted by default sed -i "s|// startWithVideoMuted: false,|startWithVideoMuted: true,|" $MEET_CONF #Start with audio muted but admin sed -i "s|// startAudioMuted: 10,|startAudioMuted: 1,|" $MEET_CONF #Disable/enable welcome page if [ "$ENABLE_WELCP" = "yes" ]; then sed -i "s|.*enableWelcomePage:.*| enableWelcomePage: false,|" $MEET_CONF elif [ "$ENABLE_WELCP" = "no" ]; then sed -i "s|.*enableWelcomePage:.*| enableWelcomePage: true,|" $MEET_CONF fi #Set displayname as not required since jibri can't set it up. sed -i "s|// requireDisplayName: true,|requireDisplayName: false,|" $MEET_CONF #Enable jibri services systemctl enable jibri systemctl enable jibri-xorg systemctl enable jibri-icewm restart_services enable_letsencrypt #SSL workaround if [ "$(dpkg-query -W -f='${Status}' nginx 2>/dev/null | grep -c "ok installed")" -eq 1 ]; then ssl_wa nginx nginx $DOMAIN $WS_CONF $SYSADMIN_EMAIL $DOMAIN install_ifnot python3-certbot-nginx else echo "No webserver found please report." fi #Brandless Mode if [ "$ENABLE_BLESSM" = "yes" ]; then echo "Custom brandless mode will be enabled." sed -i "s|ENABLE_BLESSM=.*|ENABLE_BLESSM=\"on\"|" jitsi-updater.sh bash $PWD/jm-bm.sh fi #JRA via Nextcloud if [ "$ENABLE_NC_ACCESS" = "yes" ]; then echo "JRA via Nextcloud will be enabled." bash $PWD/jra_nextcloud.sh fi } > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2) #Jigasi Transcript if [ "$ENABLE_TRANSCRIPT" = "yes" ]; then echo "Jigasi Transcription will be enabled." bash $PWD/jigasi.sh fi { #Grafana Dashboard if [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then echo "Grafana Dashboard will be enabled." bash $PWD/grafana.sh fi #Prevent Jibri conecction issue sed -i "/127.0.0.1/a \\ 127.0.0.1 $DOMAIN" /etc/hosts echo " ######################################################################## Installation complete!! for customized support: http://switnet.net ######################################################################## " apt-get -y autoremove apt-get autoclean echo "Rebooting in..." secs=$((15)) while [ $secs -gt 0 ]; do echo -ne "$secs\033[0K\r" sleep 1 : $((secs--)) done } > >(tee -a qj-installer.log) 2> >(tee -a qj-installer.log >&2) reboot