Ark74
/
quick-jibri-installer
forked from switnet/quick-jibri-installer
1
0
Fork 0
Code Pull Requests Activity

Several indenting changes

This commit is contained in:
Luis Guzmán 2022-05-20 07:00:57 -05:00
parent cb801eafd1
commit 4f9bbdf748
1 changed files with 45 additions and 54 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

91
quick_jibri_installer.sh
View File

@ -68,14 +68,10 @@ The recommended setup is using NGINX, exiting...
exit
elif [ "$NGINX" -eq 1 ]; then
echo "
Webserver already installed!
"
echo -e "\nWebserver already installed!\n"
else
echo "
Installing nginx webserver!
"
echo -e "\nInstalling nginx webserver!\n"
install_ifnot nginx
fi
}
@ -201,9 +197,7 @@ else
fi
if [ "$CPU_MIN" = "Y" ] && [ "$MEM_MIN" = "Y" ];then
echo "All requirements seems meet!"
echo "
- We hope you have a nice recording/streaming session
"
echo "\n - We hope you have a nice recording/streaming session\n "
else
echo "CPU ($(nproc --all))/RAM ($((mem_available/1024)) MiB) does NOT meet minimum recommended requirements!"
echo "Even when you can use the videoconferencing sessions, we advice to increase the resources in order to user Jibri."
@ -211,17 +205,17 @@ else
do
read -p "> Do you want to continue?: (yes or no)$NL" -r CONTINUE_LOW_RES
if [ "$CONTINUE_LOW_RES" = "no" ]; then
echo "See you next time with more resources!..."
echo " - See you next time with more resources!..."
exit
elif [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo "We highly recommend to increase the server resources."
echo "Otherwise, please think about adding dedicated jibri nodes instead."
echo " - We highly recommend to increase the server resources."
echo " - Otherwise, please think about adding dedicated jibri nodes instead."
fi
done
fi
if [ "$CONTINUE_LOW_RES" = "yes" ]; then
echo -e "\nThis server will likely have issues due the lack of resources.
echo 'This server will likely have issues due the lack of resources.
If you plan to enable other components such as,
- JRA via Nextcloud
@ -236,25 +230,24 @@ Jibri node once this installation has finished, using our script:
>> add-jibri-node.sh
So you can add a Jibri server on a instance with enough resources.\n"
So you can add a Jibri server on a instance with enough resources.'
while [[ "$DISABLE_LOCAL_JIBRI" != "yes" && "$DISABLE_LOCAL_JIBRI" != "no" ]]
do
read -p "> Do you want to disable local jibri service?: (yes or no)$NL" -r DISABLE_LOCAL_JIBRI
if [ "$DISABLE_LOCAL_JIBRI" = "no" ]; then
echo -e "Please keep in mind that we might not support underpowered servers.\n"
echo -e " - Please keep in mind that we might not support underpowered servers.\n"
elif [ "$DISABLE_LOCAL_JIBRI" = "yes" ]; then
echo -e "You can add dedicated jibri nodes later, see more at the wiki.\n"
echo -e " - You can add dedicated jibri nodes later, see more at the wiki.\n"
fi
done
fi
#Check system oriented porpuse
echo "Checking system oriented purpose....
"
apt-get -yq2 update
SYSTEM_DE="$(apt-cache search "ubuntu-(desktop|mate-desktop)"|awk '{print$1}'|xargs|sed 's|$| trisquel triskel trisquel-mini|')"
SYSTEM_DE_ARRAY=( "$SYSTEM_DE" )
echo -e "Checking for common desktop system oriented purpose....\n $de"
for de in "${SYSTEM_DE_ARRAY[@]}"
do
if [ "$(dpkg-query -W -f='${Status}' "$de" 2>/dev/null | grep -c "ok installed")" == "1" ]; then
@ -263,7 +256,7 @@ do
This is an unsupported use, as it will likely BREAK YOUR SYSTEM, so please don't."
exit
else
echo -e " > No standard desktop environment '$de' for user oriented porpuse detected, continuing..."
echo -e " > No standard desktop environment for user oriented porpuse detected, continuing..."
fi
done
@ -271,9 +264,9 @@ done
add_prosody_repo
# Jitsi-Meet Repo
echo -e "\nAdd Jitsi repo\n"
echo -e "\nAdd Jitsi repo"
if [ "$JITSI_REPO" = "stable" ]; then
echo "Jitsi stable repository already installed"
echo "- Jitsi stable repository already installed"
else
echo 'deb http://download.jitsi.org stable/' > /etc/apt/sources.list.d/jitsi-stable.list
wget -qO - https://download.jitsi.org/jitsi-key.gpg.key | apt-key add -
@ -284,9 +277,9 @@ while [[ "$LE_SSL" != "yes" && "$LE_SSL" != "no" ]]
do
read -p "> Do you plan to use Let's Encrypt SSL certs?: (yes or no)$NL" -r LE_SSL
if [ "$LE_SSL" = yes ]; then
echo -e "We'll default to Let's Encrypt SSL certs.\n"
echo -e " - We'll setup Let's Encrypt SSL certs.\n"
else
echo "We'll let you choose later on for it.
echo " - We'll let you choose later on for it.
Please be aware that a valid SSL cert is required for some features to work properly."
fi
done
@ -295,11 +288,11 @@ if [ "$LE_SSL" = "yes" ]; then
while [[ "$ANS_JD" != "yes" ]]
do
read -p "> Please set your domain (or subdomain) here: (e.g.: jitsi.domain.com)$NL" -r JITSI_DOMAIN
read -p "\n> Did you mean?: $JITSI_DOMAIN (yes or no)$NL" -r ANS_JD
read -p "> Did you mean?: $JITSI_DOMAIN (yes or no)$NL" -r ANS_JD
if [ "$ANS_JD" = "yes" ]; then
echo "Alright, let's use $JITSI_DOMAIN."
echo " - Alright, let's use $JITSI_DOMAIN."
else
echo "Please try again."
echo " - Please try again."
fi
done
@ -311,7 +304,7 @@ if [ "$LE_SSL" = "yes" ]; then
#Simple DNS test
if [ "$PUBLIC_IP" = "$(dig -4 +short "$JITSI_DOMAIN"||awk -v RS='([0-9]+\\.){3}[0-9]+' 'RT{print RT}')" ]; then
echo -e "Server public IP & DNS record for $JITSI_DOMAIN seems to match, continuing...\n"
echo -e "\nServer public IP & DNS record for $JITSI_DOMAIN seems to match, continuing..."
else
echo "Server public IP ($PUBLIC_IP) & DNS record for $JITSI_DOMAIN don't seem to match."
echo " > Please check your dns records are applied and updated, otherwise components may fail."
@ -487,11 +480,11 @@ do
echo -e "> Set $DOMAIN as a fqdn hostname?: (yes or no)" && \
read -p "Leave empty to default to your current one ($(hostname -f)):$NL" -r FQDN_HOST
if [ "$FQDN_HOST" = "yes" ]; then
echo "$DOMAIN will be used as fqdn hostname, changes will show on reboot."
echo " - $DOMAIN will be used as fqdn hostname, changes will show on reboot."
hostnamectl set-hostname "${DOMAIN}"
sed -i "1i ${PUBLIC_IP} ${DOMAIN}" /etc/hosts
else
echo "$(hostname -f) will be keep."
echo " - $(hostname -f) will be keep."
fi
done
@ -519,9 +512,9 @@ while [[ "$DROP_TLS1" != "yes" && "$DROP_TLS1" != "no" ]]
do
read -p "> Do you want to drop support for unsecure protocols TLSv1.0/1.1 now: (yes or no)$NL" -r DROP_TLS1
if [ "$DROP_TLS1" = "no" ]; then
echo "TLSv1.0/1.1 will remain."
echo " - TLSv1.0/1.1 will remain."
elif [ "$DROP_TLS1" = "yes" ]; then
echo "TLSv1.0/1.1 will be dropped"
echo " - TLSv1.0/1.1 will be dropped"
fi
done
#Dropbox -- no longer requirement for localrecording
@ -539,9 +532,9 @@ while [[ "$ENABLE_BLESSM" != "yes" && "$ENABLE_BLESSM" != "no" ]]
do
read -p "> Do you want to install customized \"brandless mode\"?: (yes or no)$NL" -r ENABLE_BLESSM
if [ "$ENABLE_BLESSM" = "no" ]; then
echo "Brandless mode won't be set."
echo " - Brandless mode won't be set."
elif [ "$ENABLE_BLESSM" = "yes" ]; then
echo "Brandless mode will be set."
echo " - Brandless mode will be set."
fi
done
#Welcome Page
@ -549,9 +542,9 @@ while [[ "$ENABLE_WELCP" != "yes" && "$ENABLE_WELCP" != "no" ]]
do
read -p "> Do you want to disable the Welcome page: (yes or no)$NL" -r ENABLE_WELCP
if [ "$ENABLE_WELCP" = "yes" ]; then
echo "Welcome page will be disabled."
echo " - Welcome page will be disabled."
elif [ "$ENABLE_WELCP" = "no" ]; then
echo "Welcome page will be enabled."
echo " - Welcome page will be enabled."
fi
done
#Close page
@ -559,9 +552,9 @@ while [[ "$ENABLE_CLOCP" != "yes" && "$ENABLE_CLOCP" != "no" ]]
do
read -p "> Do you want to enable the close page on room exit: (yes or no)$NL" -r ENABLE_CLOCP
if [ "$ENABLE_CLOCP" = "yes" ]; then
echo "Close page will be enabled."
echo " - Close page will be enabled."
elif [ "$ENABLE_CLOCP" = "no" ]; then
echo "Close page will be kept disabled."
echo " - Close page will be kept disabled."
fi
done
#Enable static avatar
@ -569,9 +562,9 @@ while [[ "$ENABLE_SA" != "yes" && "$ENABLE_SA" != "no" ]]
do
read -p "> (Legacy) Do you want to enable static avatar?: (yes or no)$NL" -r ENABLE_SA
if [ "$ENABLE_SA" = "no" ]; then
echo "Static avatar won't be enabled"
echo " - Static avatar won't be enabled"
elif [ "$ENABLE_SA" = "yes" ]; then
echo "Static avatar will be enabled"
echo " - Static avatar will be enabled"
fi
done
@ -603,9 +596,7 @@ do
done
# Set jibris default resolution
echo "
> What jibri resolution should be the default for this and all the following jibri nodes?
"
echo -e "\n> What jibri resolution should be the default for this and all the following jibri nodes?\n"
PS3='The more resolution the more resources jibri will require to record properly: '
jib_res=("HD 720" "FHD 1080")
select res in "${jib_res[@]}"
@ -641,9 +632,9 @@ do
read -p "> Do you want to setup Jibri Records Access via Nextcloud: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_NC_ACCESS
if [ "$ENABLE_NC_ACCESS" = "no" ]; then
echo -e "-- JRA via Nextcloud won't be enabled.\n"
echo -e " - JRA via Nextcloud won't be enabled.\n"
elif [ "$ENABLE_NC_ACCESS" = "yes" ]; then
echo -e "-- JRA via Nextcloud will be enabled.\n"
echo -e " - JRA via Nextcloud will be enabled.\n"
fi
done
#Jigasi
@ -657,9 +648,9 @@ elif [ "$(curl -s -o /dev/null -w "%{http_code}" "$GC_SDK_REL_FILE" )" == "200"
read -p "> Do you want to setup Jigasi Transcription: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_TRANSCRIPT
if [ "$ENABLE_TRANSCRIPT" = "no" ]; then
echo -e "-- Jigasi Transcription won't be enabled.\n"
echo -e " - Jigasi Transcription won't be enabled.\n"
elif [ "$ENABLE_TRANSCRIPT" = "yes" ]; then
echo -e "-- Jigasi Transcription will be enabled.\n"
echo -e " - Jigasi Transcription will be enabled.\n"
fi
done
else
@ -672,9 +663,9 @@ do
read -p "> Do you want to setup Grafana Dashboard: (yes or no)
( Please check requirements at: https://github.com/switnet-ltd/quick-jibri-installer )$NL" -r ENABLE_GRAFANA_DSH
if [ "$ENABLE_GRAFANA_DSH" = "no" ]; then
echo "-- Grafana Dashboard won't be enabled."
echo -e " - Grafana Dashboard won't be enabled.\n"
elif [ "$ENABLE_GRAFANA_DSH" = "yes" ]; then
echo "-- Grafana Dashboard will be enabled."
echo -e " - Grafana Dashboard will be enabled.\n"
fi
done
#Docker Etherpad
@ -682,9 +673,9 @@ while [[ "$ENABLE_DOCKERPAD" != "yes" && "$ENABLE_DOCKERPAD" != "no" ]]
do
read -p "> Do you want to setup Docker Etherpad: (yes or no)$NL" -r ENABLE_DOCKERPAD
if [ "$ENABLE_DOCKERPAD" = "no" ]; then
echo -e "-- Docker Etherpad won't be enabled.\n"
echo -e " - Docker Etherpad won't be enabled.\n"
elif [ "$ENABLE_DOCKERPAD" = "yes" ]; then
echo -e "-- Docker Etherpad will be enabled.\n"
echo -e " - Docker Etherpad will be enabled.\n"
fi
done
#Start configuration